remove spritecliphack shader and readd fickle fix

the shader aint working out that well so just do this for now

.circleci/config.yml

@@ -0,0 +1,73 @@
+version: 2
+jobs:
+  build:
+    working_directory: /root/SRB2
+    docker:
+      - image: debian:stretch
+        environment:
+          CC: ccache gcc -m32
+          PKG_CONFIG_LIBDIR: /usr/lib/i386-linux-gnu/pkgconfig
+          LIBGME_CFLAGS: -I/usr/include
+          LIBGME_LDFLAGS: -lgme
+          CCACHE_COMPRESS: true
+          WFLAGS: -Wno-unsuffixed-float-constants
+          GCC49: true
+      #- image: ubuntu:trusty
+      #  environment:
+      #    CC: ccache gcc -m32
+      #    PKG_CONFIG_LIBDIR: /usr/lib/i386-linux-gnu/pkgconfig
+      #    LIBGME_CFLAGS: -I/usr/include
+      #    LIBGME_LDFLAGS: -lgme
+      #    CCACHE_COMPRESS: true
+      #    WFLAGS: -Wno-unsuffixed-float-constants
+      #    GCC48: true
+    steps:
+      - run:
+          name: Add i386 arch
+          command: dpkg --add-architecture i386
+      - run:
+          name: Add STJr PPA
+          command: |
+            apt-get -qq update
+            apt-get -qq -y install dirmngr
+            apt-key adv --keyserver hkp://keyserver.ubuntu.com:80 --recv-keys 0B1702D71499D9C25F986507F240F4449D3B0EC6
+            echo "deb http://ppa.launchpad.net/stjr/srb2/ubuntu trusty main" >> /etc/apt/sources.list
+      - run:
+          name: Update APT listing
+          command: apt-get -qq update
+      - run:
+          name: Support S3 upload
+          command: apt-get -qq -y install ca-certificates
+      - restore_cache:
+          keys:
+            - v1-SRB2-APT
+      - run:
+          name: Install SDK
+          command: apt-get -qq -y --no-install-recommends install git build-essential libpng-dev:i386 libsdl2-mixer-dev:i386 libgme-dev:i386 libcurl4-openssl-dev:i386 libopenmpt-dev:i386 gettext ccache wget gcc-multilib upx openssh-client
+      - save_cache:
+          key: v1-SRB2-APT
+          paths:
+            - /var/cache/apt/archives
+      - checkout
+      #- run:
+      #    name: Compile without network support and BLUA
+      #    command: make -C src LINUX=1 ERRORMODE=1 -k NONET=1 NO_LUA=1
+      #- run:
+      #    name: wipe build
+      #    command: make -C src LINUX=1 cleandep
+      - run:
+          name: rebuild depend
+          command: make -C src LINUX=1 clean
+      - restore_cache:
+          keys:
+            - v1-SRB2-{{ .Branch }}-{{ checksum "objs/Linux/SDL/Release/depend.dep" }}
+      - run:
+          name: Compile
+          command: make -C src LINUX=1 ERRORMODE=1 -k
+      - store_artifacts:
+          path: /root/SRB2/bin/Linux/Release/
+          destination: bin
+      - save_cache:
+          key: v1-SRB2-{{ .Branch }}-{{ checksum "objs/Linux/SDL/Release/depend.dep" }}
+          paths:
+            - /root/.ccache

.gitignore

@@ -4,7 +4,6 @@
 *.plg
 *.suo
 *.vcproj.*.*.user
-*.kate-swp
 Win32_LIB_ASM_Debug
 Win32_LIB_ASM_Release
 *.bsc
@@ -14,17 +13,16 @@ Win32_LIB_ASM_Release
 *.dgb
 *.debug
 *.debug.txt
+/bin/VC10/
+/objs/VC10/
 *.user
 *.db
 *.opendb
 /.vs
 /debian
 /assets/debian
-/make
-/bin
-/build
-/build/*
-/CMakeUserPresets.json
-/out
-/objs/VC10
-*.kate-swp
+compile.sh
+*.gz
+.vscode/
+out
+build

.gitlab-ci.yml

@@ -0,0 +1,436 @@
+default:
+  image: debian:stable-slim
+
+stages:          # List of stages for jobs, and their order of execution
+  - build
+
+variables:
+  GIT_STRATEGY: clone
+  GIT_CLONE_PATH: $CI_BUILDS_DIR/$CI_CONCURRENT_ID/$CI_PROJECT_PATH
+
+.job_template: &job_build # This job runs in the build stage, which runs first.
+
+  stage: build
+
+  cache:
+    - key: ccache-$CI_PROJECT_PATH_SLUG-$CI_JOB_NAME_SLUG
+      fallback_keys:
+        - cache-$CI_PROJECT_PATH_SLUG-$CI_DEFAULT_BRANCH
+        - cache-$CI_PROJECT_PATH_SLUG-default
+      paths:
+        - ccache
+        - ccache_statslog
+
+    - key: apt-$CI_JOB_IMAGE
+      paths:
+        - apt-cache
+      unprotect: true
+
+  before_script:
+    - - |
+         # debconf
+         echo -e "\e[0Ksection_start:`date +%s`:debconf[collapsed=true]\r\e[0KSetup debconf's environment"
+      - export DEBIAN_FRONTEND="noninteractive"
+      - export DEBIAN_PRIORITY="low"
+      - export DEBCONF_NONINTERACTIVE_SEEN="true"
+      - |
+          # debconf
+          echo -e "\e[0Ksection_end:`date +%s`:debconf\r\e[0K"
+    - - |
+          # dpkg_aa
+          echo -e "\e[0Ksection_start:`date +%s`:dpkg_aa[collapsed=true]\r\e[0KAdding architectures to dpkg"
+      - dpkg --add-architecture i386
+      - dpkg --add-architecture amd64
+      - dpkg --add-architecture arm64
+      - |
+          # dpkg_aa
+          echo -e "\e[0Ksection_end:`date +%s`:dpkg_aa\r\e[0K"
+    - - |
+          # apt_conf
+          echo -e "\e[0Ksection_start:`date +%s`:apt_conf[collapsed=true]\r\e[0KSetting up APT conf"
+      - export APT_CACHE_DIR=`pwd`/apt-cache
+      - mkdir --parents --verbose $APT_CACHE_DIR/partial/
+      - touch /etc/apt/apt.conf.d/99build
+      - |
+          # apt.conf
+          echo Adding options to apt.conf':'
+      - |
+          # APT::Install-Recommends
+          echo APT::Install-Recommends "false"\;       | tee --append /etc/apt/apt.conf.d/99build
+      - |
+          # quit
+          echo quiet "1"\;                             | tee --append /etc/apt/apt.conf.d/99build
+      - |
+          # APT::Get::Assume-Yes
+          echo APT::Get::Assume-Yes "true"\;           | tee --append /etc/apt/apt.conf.d/99build
+      - |
+          # Dir::Cache::Archives
+          echo Dir::Cache::Archives "$APT_CACHE_DIR"\; | tee --append /etc/apt/apt.conf.d/99build
+      - |
+          # apt_conf
+          echo -e "\e[0Ksection_end:`date +%s`:apt_conf\r\e[0K"
+    - - |
+          # apt_update
+          echo -e "\e[0Ksection_start:`date +%s`:apt_update[collapsed=true]\r\e[0KUpdating APT listing"
+      - apt-get update
+      - |
+          # apt_update
+          echo -e "\e[0Ksection_end:`date +%s`:apt_update\r\e[0K"
+
+    - - |
+          # apt_pre
+          echo -e "\e[0Ksection_start:`date +%s`:apt_pre[collapsed=true]\r\e[0KInstalling pre packages"
+      - apt-get install apt-utils
+      - |
+          # apt_pre
+          echo -e "\e[0Ksection_end:`date +%s`:apt_pre\r\e[0K"
+
+    - - |
+          # apt_upgrade
+          echo -e "\e[0Ksection_start:`date +%s`:apt_upgrade[collapsed=true]\r\e[0KUpdating existing packages"
+      - apt-get upgrade
+      - |
+          # apt_update
+          echo -e "\e[0Ksection_end:`date +%s`:apt_upgrade\r\e[0K"
+
+    - - |
+          # apt_common
+          echo -e "\e[0Ksection_start:`date +%s`:apt_common[collapsed=true]\r\e[0KInstalling common packages"
+      - apt-get install make git ccache
+      - |
+          # apt_common
+          echo -e "\e[0Ksection_end:`date +%s`:apt_common\r\e[0K"
+
+    - - |
+          # ccache_config
+          echo -e "\e[0Ksection_start:`date +%s`:ccache_config[collapsed=true]\r\e[0KSetting up ccache config"
+      - mkdir --parents --verbose ~/.ccache/
+      - touch ~/.ccache/ccache.conf
+      - |
+          # cache.conf
+          echo Adding ccache configution option
+      - |
+          # base_dir
+          echo base_dir = $PWD                  | tee --append ~/.ccache/ccache.conf
+      - |
+          # cache_dir
+          echo cache_dir = $PWD/ccache          | tee --append ~/.ccache/ccache.conf
+      - |
+          # compiler_check
+          echo compiler_check = content         | tee --append ~/.ccache/ccache.conf
+      - |
+          # stats_log
+          echo stats_log = $PWD/ccache_statslog | tee --append ~/.ccache/ccache.conf
+      - |
+          # max_size
+          echo max_size = 50M                   | tee --append ~/.ccache/ccache.conf
+      - |
+          # ccache_config
+          echo -e "\e[0Ksection_end:`date +%s`:ccache_config\r\e[0K"
+
+    - - |
+          # cache_reset
+          echo -e "\e[0Ksection_start:`date +%s`:ccache_reset[collapsed=true]\r\e[0KResetting ccache statistics"
+      - ccache --zero-stats
+      - ccache --show-stats
+      - |
+          # ccache_reset
+          echo -e "\e[0Ksection_end:`date +%s`:ccache_reset\r\e[0K"
+
+  after_script:
+    - - |
+           # apt_clean
+           echo -e "\e[0Ksection_start:`date +%s`:apt_clean[collapsed=true]\r\e[0KCleaning of unneeded APT packages"
+      - apt-get autoclean
+      - |
+          # apt_clean
+          echo -e "\e[0Ksection_end:`date +%s`:apt_clean\r\e[0K"
+
+    - - |
+          # ccache_stats
+          echo -e "\e[0Ksection_start:`date +%s`:ccache_stats[collapsed=true]\r\e[0Kccache statistics:"
+      - ccache --show-stats --verbose
+      - ccache --show-log-stats --verbose
+      - |
+          # ccahe_stats
+          echo -e "\e[0Ksection_end:`date +%s`:ccache_stats\r\e[0K"
+
+Debian testing GCC:
+  <<: *job_build
+  image: debian:testing-slim
+
+  allow_failure: true
+
+  artifacts:
+    paths:
+      - "bin/"
+      - "src/comptime.h"
+    expose_as: "Debian GCC testing"
+    name: "$CI_PROJECT_PATH_SLUG-$CI_COMMIT_REF_SLUG-$CI_COMMIT_SHORT_SHA-testing-gcc"
+
+  variables:
+    CC: gcc
+
+  script:
+    - - |
+          # apt_toolchain
+          echo -e "\e[0Ksection_start:`date +%s`:apt_toolchain[collapsed=true]\r\e[0KInstalling toolchain packages"
+      - apt-get install gcc
+      - |
+          # apt_toolchain
+          echo -e "\e[0Ksection_end:`date +%s`:apt_toolchain\r\e[0K"
+
+    - - |
+          # apt_development
+          echo -e "\e[0Ksection_start:`date +%s`:apt_development[collapsed=true]\r\e[0KInstalling development packages"
+      - apt-get install libsdl2-mixer-dev libpng-dev libcurl4-openssl-dev libgme-dev libopenmpt-dev
+      - |
+          # apt_development
+          echo -e "\e[0Ksection_end:`date +%s`:apt_development\r\e[0K"
+
+    - - |
+          # make
+          echo -e "\e[0Ksection_start:`date +%s`:make[collapsed=false]\r\e[0KCompiling SRB2"
+      - make --directory=src --keep-going CCACHE=1 ERRORMODE=1 NONX86=1 || make --directory=src --keep-going CCACHE=1 ERRORMODE=1 NONX86=1
+      - |
+          # make
+          echo -e "\e[0Ksection_end:`date +%s`:make\r\e[0K"
+
+Windows x86:
+  <<: *job_build
+
+  artifacts:
+    paths:
+      - "bin/"
+      - "src/comptime.h"
+    name: "$CI_PROJECT_PATH_SLUG-$CI_COMMIT_REF_SLUG-$CI_COMMIT_SHORT_SHA-Win32"
+
+  variables:
+    PREFIX: i686-w64-mingw32
+
+  script:
+    - - |
+          # apt_toolchain
+          echo -e "\e[0Ksection_start:`date +%s`:apt_toolchain[collapsed=true]\r\e[0KInstalling toolchain packages"
+      - apt-get install gcc-mingw-w64-i686-win32
+      - |
+          # apt_toolchain
+          echo -e "\e[0Ksection_end:`date +%s`:apt_toolchain\r\e[0K"
+
+    - - |
+          # make
+          echo -e "\e[0Ksection_start:`date +%s`:make[collapsed=false]\r\e[0KCompiling SRB2"
+      - make --directory=src --keep-going CCACHE=1 ERRORMODE=1 MINGW=1 SDL=1 || make --directory=src --keep-going CCACHE=1 ERRORMODE=1 MINGW=1 SDL=1
+      - |
+          # make
+          echo -e "\e[0Ksection_end:`date +%s`:make\r\e[0K"
+
+Debian stable:amd64:
+  <<: *job_build
+
+  artifacts:
+    paths:
+      - "bin/"
+      - "src/comptime.h"
+    expose_as: "Debian amd64"
+    name: "$CI_PROJECT_PATH_SLUG-$CI_COMMIT_REF_SLUG-$CI_COMMIT_SHORT_SHA-x86-64"
+
+  variables:
+    CC: x86_64-linux-gnu-gcc
+    OBJCOPY: x86_64-linux-gnu-objcopy
+    OBJDUMP: x86_64-linux-gnu-objdump
+    PKG_CONFIG_PATH: /usr/lib/x86_64-linux-gnu/pkgconfig
+
+  script:
+    - - |
+          # apt_toolchain
+          echo -e "\e[0Ksection_start:`date +%s`:apt_toolchain[collapsed=true]\r\e[0KInstalling toolchain packages"
+      - apt-get install gcc-x86-64-linux-gnu || apt-get install gcc
+      - |
+          # apt_toolchain
+          echo -e "\e[0Ksection_end:`date +%s`:apt_toolchain\r\e[0K"
+
+    - - |
+          # apt_development
+          echo -e "\e[0Ksection_start:`date +%s`:apt_development[collapsed=true]\r\e[0KInstalling development packages"
+      - apt-get install libsdl2-mixer-dev:amd64 libpng-dev:amd64 libcurl4-openssl-dev:amd64 libgme-dev:amd64 libopenmpt-dev:amd64
+      - |
+          # apt_development
+          echo -e "\e[0Ksection_end:`date +%s`:apt_development\r\e[0K"
+
+    - - |
+          # make
+          echo -e "\e[0Ksection_start:`date +%s`:make[collapsed=false]\r\e[0KCompiling SRB2"
+      - make --directory=src --keep-going CCACHE=1 ERRORMODE=1 LINUX64=1 || make --directory=src --keep-going CCACHE=1 ERRORMODE=1 LINUX64=1
+      - |
+          # make
+          echo -e "\e[0Ksection_end:`date +%s`:make\r\e[0K"
+
+Debian stable:i386:
+  <<: *job_build
+
+  artifacts:
+    paths:
+      - "bin/"
+      - "src/comptime.h"
+    expose_as: "Debian i386"
+    name: "$CI_PROJECT_PATH_SLUG-$CI_COMMIT_REF_SLUG-$CI_COMMIT_SHORT_SHA-i686"
+
+  variables:
+    CC: i686-linux-gnu-gcc
+    OBJCOPY: i686-linux-gnu-objcopy
+    OBJDUMP: i686-linux-gnu-objdump
+    PKG_CONFIG_PATH: /usr/lib/i386-linux-gnu/pkgconfig
+
+  script:
+    - - |
+          # apt_toolchain
+          echo -e "\e[0Ksection_start:`date +%s`:apt_toolchain[collapsed=true]\r\e[0KInstalling toolchain packages"
+      - apt-get install gcc-i686-linux-gnu || apt-get install gcc
+      - |
+          # apt_toolchain
+          echo -e "\e[0Ksection_end:`date +%s`:apt_toolchain\r\e[0K"
+
+    - - |
+          # apt_development
+          echo -e "\e[0Ksection_start:`date +%s`:apt_development[collapsed=true]\r\e[0KInstalling development packages"
+      - apt-get install libsdl2-mixer-dev:i386 libpng-dev:i386 libcurl4-openssl-dev:i386 libgme-dev:i386 libopenmpt-dev:i386
+      - |
+          # apt_development
+          echo -e "\e[0Ksection_end:`date +%s`:apt_development\r\e[0K"
+
+    - - |
+          # make
+          echo -e "\e[0Ksection_start:`date +%s`:make[collapsed=false]\r\e[0KCompiling SRB2"
+      - make --directory=src --keep-going CCACHE=1 ERRORMODE=1 LINUX=1 || make --directory=src --keep-going CCACHE=1 ERRORMODE=1 LINUX=1
+      - |
+          # make
+          echo -e "\e[0Ksection_end:`date +%s`:make\r\e[0K"
+
+Debian stable:arm64:
+  <<: *job_build
+
+  artifacts:
+    paths:
+      - "bin/"
+      - "src/comptime.h"
+    expose_as: "Debian arm64"
+    name: "$CI_PROJECT_PATH_SLUG-$CI_COMMIT_REF_SLUG-$CI_COMMIT_SHORT_SHA-aarch64"
+
+  variables:
+    CC: aarch64-linux-gnu-gcc
+    OBJCOPY: aarch64-linux-gnu-objcopy
+    OBJDUMP: aarch64-linux-gnu-objdump
+    PKG_CONFIG_PATH: /usr/lib/aarch64-linux-gnu/pkgconfig
+
+  script:
+    - - |
+          # apt_toolchain
+          echo -e "\e[0Ksection_start:`date +%s`:apt_toolchain[collapsed=true]\r\e[0KInstalling toolchain packages"
+      - apt-get install gcc-aarch64-linux-gnu || apt-get install gcc
+      - |
+          # apt_toolchain
+          echo -e "\e[0Ksection_end:`date +%s`:apt_toolchain\r\e[0K"
+
+    - - |
+          # apt_development
+          echo -e "\e[0Ksection_start:`date +%s`:apt_development[collapsed=true]\r\e[0KInstalling development packages"
+      - apt-get install libsdl2-mixer-dev:arm64 libpng-dev:arm64 libcurl4-openssl-dev:arm64 libgme-dev:arm64 libopenmpt-dev:arm64
+      - |
+          # apt_development
+          echo -e "\e[0Ksection_end:`date +%s`:apt_development\r\e[0K"
+
+    - - |
+          # make
+          echo -e "\e[0Ksection_start:`date +%s`:make[collapsed=false]\r\e[0KCompiling SRB2"
+      - make --directory=src --keep-going CCACHE=1 ERRORMODE=1 LINUX64=1 ERRORMODE=1 NONX86=1 || make --directory=src --keep-going CCACHE=1 ERRORMODE=1 LINUX64=1 NONX86=1
+      - |
+          # make
+          echo -e "\e[0Ksection_end:`date +%s`:make\r\e[0K"
+
+Windows x64:
+  <<: *job_build
+
+  artifacts:
+    paths:
+      - "bin/"
+      - "src/comptime.h"
+    expose_as: "Win64"
+    name: "$CI_PROJECT_PATH_SLUG-$CI_COMMIT_REF_SLUG-$CI_COMMIT_SHORT_SHA-Win64"
+
+  variables:
+    PREFIX: x86_64-w64-mingw32
+
+  script:
+    - - |
+          # apt_toolchain
+          echo -e "\e[0Ksection_start:`date +%s`:apt_toolchain[collapsed=true]\r\e[0KInstalling toolchain packages"
+      - apt-get install gcc-mingw-w64-x86-64-win32
+      - |
+          # apt_toolchain
+          echo -e "\e[0Ksection_end:`date +%s`:apt_toolchain\r\e[0K"
+
+    - - |
+          # make
+          echo -e "\e[0Ksection_start:`date +%s`:make[collapsed=false]\r\e[0KCompiling SRB2"
+      - make --directory=src --keep-going CCACHE=1 ERRORMODE=1 MINGW64=1 SDL=1 || make --directory=src --keep-going CCACHE=1 ERRORMODE=1 MINGW64=1 SDL=1
+      - |
+          # make
+          echo -e "\e[0Ksection_end:`date +%s`:make\r\e[0K"
+
+Debian stable Clang:
+  <<: *job_build
+
+  allow_failure: true
+
+  artifacts:
+    paths:
+      - "bin/"
+      - "src/comptime.h"
+    expose_as: "Debian Clang"
+    name: "$CI_PROJECT_PATH_SLUG-$CI_COMMIT_REF_SLUG-$CI_COMMIT_SHORT_SHA-clang"
+
+  variables:
+    CC: clang
+    WFLAGS: -Wno-cast-align
+
+  script:
+    - - |
+          # apt_toolchain
+          echo -e "\e[0Ksection_start:`date +%s`:apt_toolchain[collapsed=true]\r\e[0KInstalling toolchain packages"
+      - apt-get install clang
+      - |
+          # apt_toolchain
+          echo -e "\e[0Ksection_end:`date +%s`:apt_toolchain\r\e[0K"
+
+    - - |
+          # apt_development
+          echo -e "\e[0Ksection_start:`date +%s`:apt_development[collapsed=true]\r\e[0KInstalling development packages"
+      - apt-get install libsdl2-mixer-dev libpng-dev libcurl4-openssl-dev libgme-dev libopenmpt-dev
+      - |
+          # apt_development
+          echo -e "\e[0Ksection_end:`date +%s`:apt_development\r\e[0K"
+
+    - - |
+          # make
+          echo -e "\e[0Ksection_start:`date +%s`:make[collapsed=false]\r\e[0KCompiling SRB2"
+      - make --directory=src --keep-going CCACHE=1 ERRORMODE=1 NONX86=1 || make --directory=src --keep-going CCACHE=1 ERRORMODE=1 NONX86=1
+      - |
+          # make
+          echo -e "\e[0Ksection_end:`date +%s`:make\r\e[0K"
+
+Debian testing Clang:
+  extends: Debian stable Clang
+
+  image: debian:testing-slim
+
+  artifacts:
+    paths:
+      - "bin/"
+      - "src/comptime.h"
+    expose_as: "Debina Clang testing"
+    name: "$CI_PROJECT_PATH_SLUG-$CI_COMMIT_REF_SLUG-$CI_COMMIT_SHORT_SHA-testing-clang"
+
+  variables:
+    CC: clang
+    WFLAGS: -Wno-cast-align -Wno-deprecated-non-prototype

.travis.yml

@@ -0,0 +1,712 @@
+# Travis-CI Config
+#
+# You may use the Deployer to upload packages and builds to external servers.
+# See deployer/travis/deployer_defaults.sh for environment variables to configure.
+
+language: c
+sudo: required
+dist: trusty
+
+matrix:
+    include:
+################################
+# Test Buildbots
+# Deployer does not operate on these. See Deployer Buildbots, below.
+# These bots are disabled when a deployment is triggered by 'deployer' branch name AND DPL_TERMINATE_TESTS=1.
+# These bots remain enabled when a deployment is triggered by release tag.
+################################
+        - os: linux
+          addons:
+            apt:
+              packages:
+              - libsdl2-mixer-dev
+              - libpng-dev
+              - libgl1-mesa-dev
+              - libgme-dev
+              - libcurl4-openssl-dev
+              - p7zip-full
+              - gcc-4.4
+          compiler: gcc-4.4
+          env: GCC44=1
+          if: env(DPL_ENABLED) != "1" OR env(DPL_TERMINATE_TESTS) != "1" OR NOT branch =~ /^.*deployer.*$/
+          #gcc-4.4 (Ubuntu/Linaro 4.4.7-8ubuntu1) 4.4.7
+        - os: linux
+          addons:
+            apt:
+              packages:
+              - libsdl2-mixer-dev
+              - libpng-dev
+              - libgl1-mesa-dev
+              - libgme-dev
+              - libcurl4-openssl-dev
+              - p7zip-full
+              - gcc-4.6
+          compiler: gcc-4.6
+          env: GCC46=1
+          if: env(DPL_ENABLED) != "1" OR env(DPL_TERMINATE_TESTS) != "1" OR NOT branch =~ /^.*deployer.*$/
+          #gcc-4.6 (Ubuntu/Linaro 4.6.4-6ubuntu2) 4.6.4
+        - os: linux
+          addons:
+            apt:
+              packages:
+              - libsdl2-mixer-dev
+              - libpng-dev
+              - libgl1-mesa-dev
+              - libgme-dev
+              - libcurl4-openssl-dev
+              - p7zip-full
+              - gcc-4.7
+          compiler: gcc-4.7
+          env: GCC47=1
+          if: env(DPL_ENABLED) != "1" OR env(DPL_TERMINATE_TESTS) != "1" OR NOT branch =~ /^.*deployer.*$/
+          #gcc-4.7
+        - os: linux
+          compiler: gcc
+          env: GCC48=1
+          if: env(DPL_ENABLED) != "1" OR env(DPL_TERMINATE_TESTS) != "1" OR NOT branch =~ /^.*deployer.*$/
+          #gcc (Ubuntu 4.8.4-2ubuntu1~14.04) 4.8.4
+        - os: linux
+          addons:
+            apt:
+              sources:
+              - ubuntu-toolchain-r-test
+              packages:
+              - libsdl2-mixer-dev
+              - libpng-dev
+              - libgl1-mesa-dev
+              - libgme-dev
+              - libcurl4-openssl-dev
+              - p7zip-full
+              - gcc-4.8
+          compiler: gcc-4.8
+          env: GCC48=1
+          if: env(DPL_ENABLED) != "1" OR env(DPL_TERMINATE_TESTS) != "1" OR NOT branch =~ /^.*deployer.*$/
+          #gcc-4.8 (Ubuntu 4.8.5-2ubuntu1~14.04.1) 4.8.5
+        - os: linux
+          addons:
+            apt:
+              sources:
+              - ubuntu-toolchain-r-test
+              packages:
+              - libsdl2-mixer-dev
+              - libpng-dev
+              - libgl1-mesa-dev
+              - libgme-dev
+              - libcurl4-openssl-dev
+              - p7zip-full
+              - gcc-7
+          compiler: gcc-7
+          env: WFLAGS="-Wno-tautological-compare -Wno-error=implicit-fallthrough -Wno-implicit-fallthrough" GCC72=1
+          if: env(DPL_ENABLED) != "1" OR env(DPL_TERMINATE_TESTS) != "1" OR NOT branch =~ /^.*deployer.*$/
+          #gcc-7 (Ubuntu 7.2.0-1ubuntu1~14.04) 7.2.0 20170802
+        - os: linux
+          addons:
+            apt:
+              sources:
+              - ubuntu-toolchain-r-test
+              packages:
+              - libsdl2-mixer-dev
+              - libpng-dev
+              - libgl1-mesa-dev
+              - libgme-dev
+              - libcurl4-openssl-dev
+              - p7zip-full
+              - gcc-8
+          compiler: gcc-8
+          env: WFLAGS="-Wno-tautological-compare -Wno-error=implicit-fallthrough -Wno-implicit-fallthrough -Wno-error=format-overflow -Wno-error=format-truncation" GCC81=1
+          if: env(DPL_ENABLED) != "1" OR env(DPL_TERMINATE_TESTS) != "1" OR NOT branch =~ /^.*deployer.*$/
+          #gcc-8 (Ubuntu 7.2.0-1ubuntu1~14.04) 8.1.0
+        - os: linux
+          compiler: clang
+          if: env(DPL_ENABLED) != "1" OR env(DPL_TERMINATE_TESTS) != "1" OR NOT branch =~ /^.*deployer.*$/
+          #clang version 3.5.0 (tags/RELEASE_350/final)
+        - os: linux
+          addons:
+            apt:
+              sources:
+              - llvm-toolchain-precise-3.5
+              packages:
+              - libsdl2-mixer-dev
+              - libpng-dev
+              - libgl1-mesa-dev
+              - libgme-dev
+              - libcurl4-openssl-dev
+              - p7zip-full
+              - clang-3.5
+          compiler: clang-3.5
+          if: env(DPL_ENABLED) != "1" OR env(DPL_TERMINATE_TESTS) != "1" OR NOT branch =~ /^.*deployer.*$/
+          #Ubuntu clang version 3.5.0-4ubuntu2~trusty2 (tags/RELEASE_350/final) (based on LLVM 3.5.0)
+        - os: linux
+          addons:
+            apt:
+              sources:
+              - llvm-toolchain-precise-3.6
+              - ubuntu-toolchain-r-test
+              packages:
+              - libsdl2-mixer-dev
+              - libpng-dev
+              - libgl1-mesa-dev
+              - libgme-dev
+              - libcurl4-openssl-dev
+              - p7zip-full
+              - clang-3.6
+          compiler: clang-3.6
+          if: env(DPL_ENABLED) != "1" OR env(DPL_TERMINATE_TESTS) != "1" OR NOT branch =~ /^.*deployer.*$/
+          #Ubuntu clang version 3.6.2-svn240577-1~exp1 (branches/release_36) (based on LLVM 3.6.2)
+        - os: linux
+          addons:
+            apt:
+              sources:
+              - llvm-toolchain-precise-3.7
+              - ubuntu-toolchain-r-test
+              packages:
+              - libsdl2-mixer-dev
+              - libpng-dev
+              - libgl1-mesa-dev
+              - libgme-dev
+              - libcurl4-openssl-dev
+              - p7zip-full
+              - clang-3.7
+          compiler: clang-3.7
+          if: env(DPL_ENABLED) != "1" OR env(DPL_TERMINATE_TESTS) != "1" OR NOT branch =~ /^.*deployer.*$/
+          #Ubuntu clang version 3.7.1-svn253571-1~exp1 (branches/release_37) (based on LLVM 3.7.1)
+        - os: linux
+          addons:
+            apt:
+              sources:
+              - llvm-toolchain-precise-3.8
+              - ubuntu-toolchain-r-test
+              packages:
+              - libsdl2-mixer-dev
+              - libpng-dev
+              - libgl1-mesa-dev
+              - libgme-dev
+              - libcurl4-openssl-dev
+              - p7zip-full
+              - clang-3.8
+          compiler: clang-3.8
+          if: env(DPL_ENABLED) != "1" OR env(DPL_TERMINATE_TESTS) != "1" OR NOT branch =~ /^.*deployer.*$/
+          #clang version 3.8.1-svn271127-1~exp1 (branches/release_38)
+        - os: linux
+          addons:
+            apt:
+              sources:
+              - llvm-toolchain-precise-3.9
+              - ubuntu-toolchain-r-test
+              packages:
+              - libsdl2-mixer-dev
+              - libpng-dev
+              - libgl1-mesa-dev
+              - libgme-dev
+              - libcurl4-openssl-dev
+              - p7zip-full
+              - clang-3.9
+          compiler: clang-3.9
+          if: env(DPL_ENABLED) != "1" OR env(DPL_TERMINATE_TESTS) != "1" OR NOT branch =~ /^.*deployer.*$/
+          #clang version 3.9.X
+#        - os: linux
+#          addons:
+#            apt:
+#              sources:
+#              - llvm-toolchain-precise-4.0
+#              - ubuntu-toolchain-r-test
+#              packages:
+#              - libsdl2-mixer-dev
+#              - libpng-dev
+#              - libgl1-mesa-dev
+#              - libgme-dev
+#              - p7zip-full
+#              - clang-4.0
+#          compiler: clang-4.0
+#          if: env(DPL_ENABLED) != "1" OR env(DPL_TERMINATE_TESTS) != "1" OR NOT branch =~ /^.*deployer.*$/
+#          #clang version 4.0.X
+#        - os: linux
+#          addons:
+#            apt:
+#              sources:
+#              - llvm-toolchain-precise-5.0
+#              - ubuntu-toolchain-r-test
+#              packages:
+#              - libsdl2-mixer-dev
+#              - libpng-dev
+#              - libgl1-mesa-dev
+#              - libgme-dev
+#              - p7zip-full
+#              - clang-5.0
+#          compiler: clang-5.0
+#          if: env(DPL_ENABLED) != "1" OR env(DPL_TERMINATE_TESTS) != "1" OR NOT branch =~ /^.*deployer.*$/
+#          #clang version 5.0.X
+#        - os: osx
+#          osx_image: beta-xcode6.1
+#          if: env(DPL_ENABLED) != "1" OR env(DPL_TERMINATE_TESTS) != "1" OR NOT branch =~ /^.*deployer.*$/
+#          #Apple LLVM version 6.0 (clang-600.0.54) (based on LLVM 3.5svn)
+#        - os: osx
+#          osx_image: beta-xcode6.2
+#          compiler: gcc
+#          if: env(DPL_ENABLED) != "1" OR env(DPL_TERMINATE_TESTS) != "1" OR NOT branch =~ /^.*deployer.*$/
+#          #Apple LLVM version 6.0 (clang-600.0.57) (based on LLVM 3.5svn)
+##        - os: osx
+##          osx_image: beta-xcode6.3
+##          if: env(DPL_ENABLED) != "1" OR env(DPL_TERMINATE_TESTS) != "1" OR NOT branch =~ /^.*deployer.*$/
+##          #I think xcode.6.3 VM is broken, it does not boot
+#        - os: osx
+#          osx_image: xcode6.4
+#          if: env(DPL_ENABLED) != "1" OR env(DPL_TERMINATE_TESTS) != "1" OR NOT branch =~ /^.*deployer.*$/
+#          #Apple LLVM version 6.1.0 (clang-602.0.53) (based on LLVM 3.6.0svn)
+#        - os: osx
+#          osx_image: xcode7
+#          if: env(DPL_ENABLED) != "1" OR env(DPL_TERMINATE_TESTS) != "1" OR NOT branch =~ /^.*deployer.*$/
+#          #Apple LLVM version 7.0.0 (clang-700.0.72)
+#        - os: osx
+#          osx_image: xcode7.1
+#          if: env(DPL_ENABLED) != "1" OR env(DPL_TERMINATE_TESTS) != "1" OR NOT branch =~ /^.*deployer.*$/
+#          #Apple LLVM version 7.0.0 (clang-700.1.76)
+#        - os: osx
+#          osx_image: xcode7.2
+#          if: env(DPL_ENABLED) != "1" OR env(DPL_TERMINATE_TESTS) != "1" OR NOT branch =~ /^.*deployer.*$/
+#          #Apple LLVM version 7.0.2 (clang-700.1.81)
+#        - os: osx
+#          osx_image: xcode7.3
+#          #Apple LLVM version 7.3.0 (clang-703.0.31)
+#        - os: osx
+#          osx_image: xcode7.3
+#          #Apple LLVM version 7.3.0 (clang-703.0.31)
+        - os: osx
+          if: env(DPL_ENABLED) != "1" OR env(DPL_TERMINATE_TESTS) != "1" OR NOT branch =~ /^.*deployer.*$/
+          #Default: macOS 10.13 and Xcode 9.4.1
+
+
+################################
+# Deployer Buildbots - OSX
+################################
+        - os: osx
+          if: env(DPL_ENABLED) = "1" AND (env(_DPL_JOB_ENABLED) = "1" OR env(DPL_JOB_ENABLE_ALL) = "1")
+              AND (branch =~ /^.*deployer.*$/ OR (tag IS present AND env(DPL_TAG_ENABLED) = "1"))
+              AND env(DPL_TERMINATE_MAIN) != "1"
+          env:
+          - _DPL_JOB_ENABLED=1
+          - _DPL_JOB_NAME=osx
+          - _DPL_FTP_TARGET=1
+          - _DPL_PACKAGE_BINARY=1
+          #Apple LLVM version 7.3.0 (clang-703.0.31)
+
+
+################################
+# Deployer Buildbots - Linux assets
+# Set DPL_TERMINATE_ASSETS to disable all of these
+# List Ubuntu LTS next, newest to oldest
+# Then list non-LTS, newest to oldest
+################################
+        - os: linux
+          addons:
+            apt:
+              packages:
+              - libsdl2-mixer-dev
+              - libpng-dev
+              - libgl1-mesa-dev
+              - libgme-dev
+              - libcurl4-openssl-dev
+              - p7zip-full
+              - gcc-4.8
+          compiler: gcc-4.8
+          dist: xenial
+          if: env(DPL_ENABLED) = "1" AND (env(_DPL_JOB_ENABLED) = "1" OR env(DPL_JOB_ENABLE_ALL) = "1")
+              AND (branch =~ /^.*deployer.*$/ OR (tag IS present AND env(DPL_TAG_ENABLED) = "1"))
+              AND env(DPL_TERMINATE_ASSETS) != "1"
+          env:
+          - _DPL_JOB_ENABLED=1
+          - _DPL_JOB_NAME=bionic-asset
+          - _DPL_DPUT_TARGET=1
+          - _DPL_PACKAGE_SOURCE=1
+          - _DPL_PACKAGE_MAIN=0
+          - _DPL_PACKAGE_ASSET=1
+          - PACKAGE_DISTRO=bionic
+          #- PACKAGE_SUBVERSION=~18.04bionic
+          #gcc-4.8 (Ubuntu 4.8.5-2ubuntu1~14.04.1) 4.8.5
+
+        ################################
+        # The below asset bots produce packages that occupy too much space.
+        # It would be nice if the asset files were not included in the source package itself,
+        # so these can deploy to each Ubuntu target without manual intervention.
+        #
+        # Currently, to get around Launchpad's space limitation,
+        # copy the packages from *one* bot and the space usage is not increased.
+        ################################
+        # - os: linux
+        #   addons:
+        #     apt:
+        #       packages:
+        #       - libsdl2-mixer-dev
+        #       - libpng-dev
+        #       - libgl1-mesa-dev
+        #       - libgme-dev
+        #       - p7zip-full
+        #       - gcc-4.8
+        #   compiler: gcc-4.8
+        #   dist: trusty
+        #   if: env(DPL_ENABLED) = "1" AND (env(_DPL_JOB_ENABLED) = "1" OR env(DPL_JOB_ENABLE_ALL) = "1")
+        #       AND (branch =~ /^.*deployer.*$/ OR (tag IS present AND env(DPL_TAG_ENABLED) = "1"))
+        #       AND env(DPL_TERMINATE_ASSETS) != "1"
+        #   env:
+        #   - _DPL_JOB_ENABLED=1
+        #   - _DPL_JOB_NAME=trusty-asset
+        #   - _DPL_DPUT_TARGET=1
+        #   - _DPL_PACKAGE_SOURCE=1
+        #   - _DPL_PACKAGE_MAIN=0
+        #   - _DPL_PACKAGE_ASSET=1
+        #   - PACKAGE_DISTRO=trusty
+        #   #- PACKAGE_SUBVERSION=~14.04trusty
+        #   #gcc-4.8 (Ubuntu 4.8.5-2ubuntu1~14.04.1) 4.8.5
+        # - os: linux
+        #   addons:
+        #     apt:
+        #       packages:
+        #       - libsdl2-mixer-dev
+        #       - libpng-dev
+        #       - libgl1-mesa-dev
+        #       - libgme-dev
+        #       - p7zip-full
+        #       - gcc-4.8
+        #   compiler: gcc-4.8
+        #   dist: xenial
+        #   if: env(DPL_ENABLED) = "1" AND (env(_DPL_JOB_ENABLED) = "1" OR env(DPL_JOB_ENABLE_ALL) = "1")
+        #       AND (branch =~ /^.*deployer.*$/ OR (tag IS present AND env(DPL_TAG_ENABLED) = "1"))
+        #       AND env(DPL_TERMINATE_ASSETS) != "1"
+        #   env:
+        #   - _DPL_JOB_ENABLED=1
+        #   - _DPL_JOB_NAME=disco-asset
+        #   - _DPL_DPUT_TARGET=1
+        #   - _DPL_PACKAGE_SOURCE=1
+        #   - _DPL_PACKAGE_MAIN=0
+        #   - _DPL_PACKAGE_ASSET=1
+        #   - PACKAGE_DISTRO=disco
+        #   #- PACKAGE_SUBVERSION=~19.04disco
+        #   #gcc-4.8 (Ubuntu 4.8.5-2ubuntu1~14.04.1) 4.8.5
+        # - os: linux
+        #   addons:
+        #     apt:
+        #       packages:
+        #       - libsdl2-mixer-dev
+        #       - libpng-dev
+        #       - libgl1-mesa-dev
+        #       - libgme-dev
+        #       - p7zip-full
+        #       - gcc-4.8
+        #   compiler: gcc-4.8
+        #   dist: xenial
+        #   if: env(DPL_ENABLED) = "1" AND (env(_DPL_JOB_ENABLED) = "1" OR env(DPL_JOB_ENABLE_ALL) = "1")
+        #       AND (branch =~ /^.*deployer.*$/ OR (tag IS present AND env(DPL_TAG_ENABLED) = "1"))
+        #       AND env(DPL_TERMINATE_ASSETS) != "1"
+        #   env:
+        #   - _DPL_JOB_ENABLED=1
+        #   - _DPL_JOB_NAME=cosmic-asset
+        #   - _DPL_DPUT_TARGET=1
+        #   - _DPL_PACKAGE_SOURCE=1
+        #   - _DPL_PACKAGE_MAIN=0
+        #   - _DPL_PACKAGE_ASSET=1
+        #   - PACKAGE_DISTRO=cosmic
+        #   #- PACKAGE_SUBVERSION=~18.10cosmic
+        #   #gcc-4.8 (Ubuntu 4.8.5-2ubuntu1~14.04.1) 4.8.5
+        # - os: linux
+        #   addons:
+        #     apt:
+        #       packages:
+        #       - libsdl2-mixer-dev
+        #       - libpng-dev
+        #       - libgl1-mesa-dev
+        #       - libgme-dev
+        #       - p7zip-full
+        #       - gcc-4.8
+        #   compiler: gcc-4.8
+        #   dist: xenial
+        #   if: env(DPL_ENABLED) = "1" AND (env(_DPL_JOB_ENABLED) = "1" OR env(DPL_JOB_ENABLE_ALL) = "1")
+        #       AND (branch =~ /^.*deployer.*$/ OR (tag IS present AND env(DPL_TAG_ENABLED) = "1"))
+        #       AND env(DPL_TERMINATE_ASSETS) != "1"
+        #   env:
+        #   - _DPL_JOB_ENABLED=1
+        #   - _DPL_JOB_NAME=xenial-asset
+        #   - _DPL_DPUT_TARGET=1
+        #   - _DPL_PACKAGE_SOURCE=1
+        #   - _DPL_PACKAGE_MAIN=0
+        #   - _DPL_PACKAGE_ASSET=1
+        #   - PACKAGE_DISTRO=xenial
+        #   #- PACKAGE_SUBVERSION=~16.04xenial
+        #   #gcc-4.8 (Ubuntu 4.8.5-2ubuntu1~14.04.1) 4.8.5
+
+
+################################
+# Deployer Buildbots - Linux binaries
+# List Ubuntu LTS, newest to oldest
+# Then list non-LTS, newest to oldest
+################################
+        - os: linux
+          addons:
+            apt:
+              packages:
+              - libsdl2-mixer-dev
+              - libpng-dev
+              - libgl1-mesa-dev
+              - libgme-dev
+              - libcurl4-openssl-dev
+              - p7zip-full
+              - gcc-4.8
+          compiler: gcc-4.8
+          dist: xenial
+          if: env(DPL_ENABLED) = "1" AND (env(_DPL_JOB_ENABLED) = "1" OR env(DPL_JOB_ENABLE_ALL) = "1")
+              AND (branch =~ /^.*deployer.*$/ OR (tag IS present AND env(DPL_TAG_ENABLED) = "1"))
+              AND env(DPL_TERMINATE_MAIN) != "1"
+          env:
+          - _DPL_JOB_ENABLED=1
+          - _DPL_JOB_NAME=focal
+          - _DPL_DPUT_TARGET=1
+          - _DPL_PACKAGE_SOURCE=1
+          - PACKAGE_DISTRO=focal
+          - PACKAGE_SUBVERSION=~20.04focal
+          #gcc-4.8 (Ubuntu 4.8.5-2ubuntu1~14.04.1) 4.8.5
+        - os: linux
+          addons:
+            apt:
+              packages:
+              - libsdl2-mixer-dev
+              - libpng-dev
+              - libgl1-mesa-dev
+              - libgme-dev
+              - libcurl4-openssl-dev
+              - p7zip-full
+              - gcc-4.8
+          compiler: gcc-4.8
+          dist: xenial
+          if: env(DPL_ENABLED) = "1" AND (env(_DPL_JOB_ENABLED) = "1" OR env(DPL_JOB_ENABLE_ALL) = "1")
+              AND (branch =~ /^.*deployer.*$/ OR (tag IS present AND env(DPL_TAG_ENABLED) = "1"))
+              AND env(DPL_TERMINATE_MAIN) != "1"
+          env:
+          - _DPL_JOB_ENABLED=1
+          - _DPL_JOB_NAME=bionic
+          - _DPL_DPUT_TARGET=1
+          - _DPL_PACKAGE_SOURCE=1
+          - PACKAGE_DISTRO=bionic
+          - PACKAGE_SUBVERSION=~18.04bionic
+          #gcc-4.8 (Ubuntu 4.8.5-2ubuntu1~14.04.1) 4.8.5
+        - os: linux
+          addons:
+            apt:
+              packages:
+              - libsdl2-mixer-dev
+              - libpng-dev
+              - libgl1-mesa-dev
+              - libgme-dev
+              - libcurl4-openssl-dev
+              - p7zip-full
+              - gcc-4.8
+          compiler: gcc-4.8
+          dist: xenial
+          if: env(DPL_ENABLED) = "1" AND (env(_DPL_JOB_ENABLED) = "1" OR env(DPL_JOB_ENABLE_ALL) = "1")
+              AND (branch =~ /^.*deployer.*$/ OR (tag IS present AND env(DPL_TAG_ENABLED) = "1"))
+              AND env(DPL_TERMINATE_MAIN) != "1"
+          env:
+          - _DPL_JOB_ENABLED=1
+          - _DPL_JOB_NAME=xenial
+          - _DPL_DPUT_TARGET=1
+          - _DPL_PACKAGE_SOURCE=1
+          - PACKAGE_DISTRO=xenial
+          - PACKAGE_SUBVERSION=~16.04xenial
+          #gcc-4.8 (Ubuntu 4.8.5-2ubuntu1~14.04.1) 4.8.5
+        - os: linux
+          addons:
+            apt:
+              packages:
+              - libsdl2-mixer-dev
+              - libpng-dev
+              - libgl1-mesa-dev
+              - libgme-dev
+              - libcurl4-openssl-dev
+              - p7zip-full
+              - gcc-4.8
+          compiler: gcc-4.8
+          dist: trusty
+          if: env(DPL_ENABLED) = "1" AND (env(_DPL_JOB_ENABLED) = "1" OR env(DPL_JOB_ENABLE_ALL) = "1")
+              AND (branch =~ /^.*deployer.*$/ OR (tag IS present AND env(DPL_TAG_ENABLED) = "1"))
+              AND env(DPL_TERMINATE_MAIN) != "1"
+          env:
+          - _DPL_JOB_ENABLED=1
+          - _DPL_JOB_NAME=trusty
+          - _DPL_DPUT_TARGET=1
+          - _DPL_PACKAGE_SOURCE=1
+          - PACKAGE_DISTRO=trusty
+          - PACKAGE_SUBVERSION=~14.04trusty
+          #gcc-4.8 (Ubuntu 4.8.5-2ubuntu1~14.04.1) 4.8.5
+        - os: linux
+          addons:
+            apt:
+              packages:
+              - libsdl2-mixer-dev
+              - libpng-dev
+              - libgl1-mesa-dev
+              - libgme-dev
+              - libcurl4-openssl-dev
+              - p7zip-full
+              - gcc-4.8
+          compiler: gcc-4.8
+          dist: xenial
+          if: env(DPL_ENABLED) = "1" AND (env(_DPL_JOB_ENABLED) = "1" OR env(DPL_JOB_ENABLE_ALL) = "1")
+              AND (branch =~ /^.*deployer.*$/ OR (tag IS present AND env(DPL_TAG_ENABLED) = "1"))
+              AND env(DPL_TERMINATE_MAIN) != "1"
+          env:
+          - _DPL_JOB_ENABLED=1
+          - _DPL_JOB_NAME=eoan
+          - _DPL_DPUT_TARGET=1
+          - _DPL_PACKAGE_SOURCE=1
+          - PACKAGE_DISTRO=eoan
+          - PACKAGE_SUBVERSION=~19.10eoan
+          #gcc-4.8 (Ubuntu 4.8.5-2ubuntu1~14.04.1) 4.8.5
+    allow_failures:
+      - compiler: clang-3.5
+      - compiler: clang-3.6
+      - compiler: clang-3.7
+      - compiler: clang-3.8
+      - compiler: clang-3.9
+      - compiler: clang-4.0
+      - compiler: clang-5.0
+
+
+cache:
+  apt: true
+  ccache: true
+  directories:
+  - $HOME/srb2_cache
+
+
+addons:
+  apt:
+    packages:
+    - libsdl2-mixer-dev
+    - libpng-dev
+    - libgl1-mesa-dev
+    - libgme-dev
+    - zlib1g-dev
+    - libcurl4-openssl-dev
+    - p7zip-full
+  homebrew:
+    taps:
+    - mazmazz/srb2
+    packages:
+    - sdl2_mixer
+    - game-music-emu
+    - p7zip
+    - cmake
+    - curl
+    update: true
+
+
+
+before_install:
+  # Initialize Deployer defaults
+  - . ./deployer/travis/deployer_defaults.sh
+
+  # Initialize Deployer; check if Deployer is enabled
+  # This needs to be run in the current shell so that $__DPL_ACTIVE is set for this session
+  - . ./deployer/travis/deployer.sh
+
+  # Also check if we should now terminate -- see `deployer.sh` for conditions.
+  # This should never happen on non-release buildbots when Deployer is not triggered.
+  - if [[ "$__DPL_TRY_TERMINATE_EARLY" == "1" ]]; then
+      if [[ "$__DPL_ACTIVE" != "1" ]]; then
+        echo "Exiting early because this job is not deploying.";
+        exit;
+      fi;
+    fi
+
+  # If we're triggered by release tag, force ASSET_FILES_OPTIONAL_GET=1
+  - if [[ "$__DPL_TAG_ELIGIBLE" = "1" ]]; then
+      ASSET_FILES_OPTIONAL_GET=1;
+    fi;
+
+
+install:
+  # Install OS X library dependencies via Homebrew
+  # Do this differently for release buildbots:
+  #     * `brew install --build-bottle` builds libraries for x86_64's lowest common denominator CPU, core2
+  #     * `sdl2_mixer` requires options from the formula tap https://github.com/mazmazz/homebrew-srb2
+  #     * `brew postinstall` runs post-install scripts after building a bottle
+  - if [[ "$TRAVIS_OS_NAME" == "osx" ]]; then
+      if [[ "$__DPL_ACTIVE" == "1" ]]; then
+        brew install --build-bottle sdl2 game-music-emu;
+        brew install --build-bottle mazmazz/srb2/sdl2_mixer --with-flac --with-mpg123;
+        brew postinstall sdl2 game-music-emu mazmazz/srb2/sdl2_mixer;
+      fi;
+    fi
+  - mkdir -p $HOME/srb2_cache
+
+
+before_script:
+  # OLDPWD is root repo folder
+  - OLDPWD=$PWD
+  - __ASSET_DIRECTORY="$OLDPWD/assets/installer"
+  - mkdir -p "$__ASSET_DIRECTORY"
+  - cd "$HOME/srb2_cache"
+
+  # Get stat command so we know what the cached archive date is.
+  # stat is different for OSX
+  - if [[ "$TRAVIS_OS_NAME" == "osx" ]]; then
+      STATCMD="stat -f %m";
+    else
+      STATCMD="stat -c %y";
+    fi
+
+  # Get asset files (required for MD5)
+  # See `deployer_defaults.sh` for asset download path
+  - if [[ "$ASSET_ARCHIVE_PATH" != "" ]]; then
+      if [ -f "$(basename $ASSET_ARCHIVE_PATH)" ]; then
+        echo "$(basename $ASSET_ARCHIVE_PATH) cache date -- $($STATCMD $(basename $ASSET_ARCHIVE_PATH))";
+      fi;
+      wget --verbose --server-response -N "$ASSET_ARCHIVE_PATH";
+      7z x "$(basename $ASSET_ARCHIVE_PATH)" -o"$__ASSET_DIRECTORY" -aos;
+    fi;
+
+  # Get optional files too
+  - if [[ "$__DPL_ACTIVE" == "1" ]] && [[ "$ASSET_FILES_OPTIONAL_GET" == "1" ]] && [[ "$ASSET_ARCHIVE_OPTIONAL_PATH" != "" ]]; then
+      if [ -f "$(basename $ASSET_ARCHIVE_OPTIONAL_PATH)" ]; then
+        echo "$(basename $ASSET_ARCHIVE_OPTIONAL_PATH) cache date -- $($STATCMD $(basename $ASSET_ARCHIVE_OPTIONAL_PATH))";
+      fi;
+      wget --verbose --server-response -N "$ASSET_ARCHIVE_OPTIONAL_PATH";
+      7z x "$(basename $ASSET_ARCHIVE_OPTIONAL_PATH)" -o"$__ASSET_DIRECTORY" -aos;
+    fi;
+
+  # Go back to root repo folder
+  - cd "$OLDPWD"
+
+  # Prepare CMake asset lists
+  - SRB2_ASSET_HASHED=$(echo ${ASSET_FILES_HASHED// /\;})
+  - SRB2_ASSET_DOCS=$(echo ${ASSET_FILES_DOCS// /\;})
+  - SRB2_ASSET_DIRECTORY="$__ASSET_DIRECTORY"
+
+  # Prepare CMake
+  - mkdir build
+  - cd build
+  - mkdir package
+  - export CFLAGS="-Wall -W -Werror $WFLAGS"
+  - export CCACHE_COMPRESS=true
+  # If OS X, set -march=core2 to build compatible binaries with old Macs
+  - if [[ "$TRAVIS_OS_NAME" == "osx" ]]; then
+      export CFLAGS="${CFLAGS} -march=core2";
+    fi;
+  - cmake .. -DCMAKE_BUILD_TYPE=Release -DCMAKE_INSTALL_PREFIX=$PWD/bin -DCPACK_PACKAGE_DIRECTORY=$PWD/package
+      -DSRB2_ASSET_HASHED="${SRB2_ASSET_HASHED}" -DSRB2_ASSET_DOCS="${SRB2_ASSET_DOCS}"
+      -DSRB2_ASSET_DIRECTORY="${SRB2_ASSET_DIRECTORY}"
+      -DCPACK_PACKAGE_DESCRIPTION_SUMMARY="${PROGRAM_NAME}"
+      -DCPACK_PACKAGE_VENDOR="${PROGRAM_VENDOR}"
+      -DSRB2_SDL2_EXE_NAME="${PROGRAM_FILENAME}"
+
+script:
+  # Build our Makefile from Cmake!
+  - if [[ "$__DPL_ACTIVE" == "1" ]]; then
+      . ../deployer/travis/deployer_build.sh;
+    else
+      make -k;
+    fi;
+
+after_success:
+  # Run the upload scripts
+  # These do nothing if Deployer is not triggered
+  - . ../deployer/travis/deployer_ftp.sh
+  - . ../deployer/travis/deployer_dput.sh

AppImage_build.sh

@@ -1,346 +0,0 @@
-#!/bin/bash
-set -e # Enable auto-exit for debugging :))
-
-# Make Linux AppImage program data
-# https://docs.appimage.org/reference/appdir.html
-
-# PWD: {repo_root}/build
-# See deployer.sh for usage
-
-# Terminal stuff
-RESET="$(tput sgr0)" #"\e[0m" # Resets terminal colors
-
-# Colors for various information types
-FAILURE="$(tput setaf 1)" #"\e[91m"
-SUCCESS="$(tput setaf 2)" #"\e[92m"
-NOTICE="$(tput setaf 3)" #"\e[93m"
-VERBOSE="$(tput setaf 4)" #"\e[94m"
-
-verbosity=0 # By default don't print anything unless it's *ultra* important.
-quiet=0 # Also don't print anything if they supplied the quiet argument
-
-# URL from which to download appimagetool if there isn't one available in your $PATH
-# at time of writing only aarch64, armhf, i686, and x86_64 versions are available via this method
-# in those cases, and honestly even outside of those cases, it's better to just put a working one in your $PATH yourself..
-url="https://github.com/AppImage/AppImageKit/releases/download/continuous/appimagetool-$(uname -m).AppImage"
-
-# A whitelist of libraries to include into SRB2's AppImage if SRB2 is dynamically linked.
-# please don't add a newline at the end of this or i will cry :(
-libraryWhitelist="
-libbacktrace
-libnsl
-libSDL2
-libSDL2_mixer
-libgme
-libopenmpt
-libpng
-libfluidsynth
-libpulse
-libmodplug
-libvorbisfile
-libopusfile
-libFLAC
-libmad
-libmpg123
-libvorbis
-libpulsecommon
-libsndfile
-libsndio
-libogg
-libvorbisenc
-libjson
-libreadline
-libwrap
-libtinfo
-libtirpc
-libpng16"
-
-# these kinda look like macros don't they
-function print { (( "$quiet" == 0 )) && echo "$@" || :; } # echo if not quiet
-function coloredText { printf "$1"; print "${@:2}"; printf "$RESET"; } # use print to inherit quiet
-function success { coloredText "$SUCCESS" "$@"; } # use coloredText to inherit quiet
-function important { coloredText "$NOTICE" "$@"; } # use coloredText to inherit quiet
-function verboseOnly { (( "$verbosity" >= $1 )) && (coloredText "$VERBOSE" "${@:2}") || :; } # use coloredText to inherit quiet
-
-# Parses an argument with a single dash
-function parseSingleDashArg() {
-	while read -n 1 char; do
-		if [[ "$char" == '-' || "$char" == '' ]]; then
-			:
-		elif [[ "$char" == 'h' ]]; then
-			helppassed=1
-		elif [[ "$char" == 'q' ]]; then
-			quiet=1
-		elif [[ "$char" == 'v' ]]; then
-			verbosity="$((verbosity + 1))"
-		elif [[ "$char" == 'd' ]]; then
-			dry=1
-		elif [[ "$char" == 's' ]]; then
-			small=1
-		else
-			echo "$0: invalid option -- '$1'"
-			echo "Try '$0 --help' for more information."
-			return 1
-		fi
-	done <<<"$1"
-}
-
-# Simple help argument checker.
-currentarg=1; # Which argument is --help...
-
-# For $arg in the argument array...
-for arg in "$@"; do
-	# Is it a help argument?
-	if [[ "$arg" == "--help" ]]; then
-		helppassed=1; # Help is passed, set $helppassed!
-		set -- "${@:1:$currentarg-1}" "${@:$currentarg+1}" # Remove argument from list
-	elif [[ "$arg" == "--quiet" ]]; then
-		quiet=1
-		set -- "${@:1:$currentarg-1}" "${@:$currentarg+1}"
-	elif [[ "$arg" == "--verbose" ]]; then
-		verbosity="$((verbosity + 1))" # Increase verbosity!
-		set -- "${@:1:$currentarg-1}" "${@:$currentarg+1}"
-	elif [[ "$arg" == "--dry" ]]; then
-		dry=1; # Show parameters instead of using them.
-		set -- "${@:1:$currentarg-1}" "${@:$currentarg+1}"
-	elif [[ "$arg" == "--small" ]]; then
-		small=1; # Don't copy assets to save on bandwidth.
-		set -- "${@:1:$currentarg-1}" "${@:$currentarg+1}"
-	elif [[ ! "$arg" == *'--'* && "$arg" == *'-'* ]]; then
-		parseSingleDashArg "$arg"
-
-		if [[ "$?" == 0 ]]; then
-			set -- "${@:1:$currentarg-1}" "${@:$currentarg+1}" # Remove argument from list
-		fi
-	elif [[ $arg == *'--'* ]]; then
-		print "$0: invalid option -- '$1'"
-		print "Try '$0 --help' for more information."
-		return 1
-	else
-		currentarg="$((currentarg+1))" # Increment current argument number otherwise...
-	fi
-done
-
-important "SRB2Kart AppImage Packager v1.0 modified for kart by NepDisk."
-important "Orignal for SRB2 my mazmazz and Golden."
-
-# Get root directory from the full path of this script.
-__ROOT_DIR="$3"
-
-if [[ -z "$3" ]]; then
-	# finds out where this script is and goes to that directory and goes up one for the root
-
-	scriptdir="$(dirname "${BASH_SOURCE[0]}")"
-	scriptbase="$(basename "${BASH_SOURCE[0]}")"
-
-	__ROOT_DIR="$(cd "$scriptdir" && pwd -P)"
-fi
-
-# If it starts with '.', put the current working directory behind it so things work.
-if [[ "$__ROOT_DIR" == '.' || "$__ROOT_DIR" == '..' ]]; then
-	__ROOT_DIR="$PWD/$__ROOT_DIR"
-fi
-
-# Set up defaults
-__PROGRAM_NAME="${PROGRAM_NAME:-"SRB2Kart Saturn"}"
-__PROGRAM_DESCRIPTION="${PROGRAM_DESCRIPTION:-"Modded version of SRB2kart with more features."}"
-__PROGRAM_FILENAME="${PROGRAM_FILENAME:-"lsdl2srb2kart"}"
-__PROGRAM_ASSETS="${PROGRAM_ASSETS:-"$__ROOT_DIR/assets/installer"}"
-
-__BUILD_DIR="${1:-"$__ROOT_DIR/bin"}"
-__OUTPUT_FILENAME="${2:-"$__PROGRAM_FILENAME.AppImage"}"
-
-__APPIMAGETOOL="${4:-"appimagetool"}"
-
-if (! command -v "$__APPIMAGETOOL" &> /dev/null); then
-	__APPIMAGETOOL=
-fi
-
-# Stuff that prints and exits.
-
-# Prints setup text using method given by arguments.
-# Example: printSetup "print" # print "Setup for AppImage...
-function printSetup {
-	$@ "Setup for AppImage in BUILD_DIR: '$__BUILD_DIR'..."
-	$@ "With the OUTPUT_FILENAME: '$__OUTPUT_FILENAME'"
-	$@ "And SRB2 Repository Root ROOT_DIR: '$__ROOT_DIR'"
-	$@ "Using APPIMAGETOOL: '$([ -z "$__APPIMAGETOOL" ] && echo '(download)' || echo $__APPIMAGETOOL)'"
-	$@ ""
-	$@ "This should be run from a Makefile or from the directory of the build. If it is not, then change to that directory or specify that directory as an argument."
-	$@ "If ROOT_DIR isn't SRB2's repository root, specify that as an argument too."
-	$@ "Make must have built the program before you run this script."
-	$@ ""
-	$@ "Make sure these Environment Variables are correct."
-	$@ "If not, then enter: export PROGRAM_VARIABLE=value"
-	$@ "PROGRAM_NAME: $__PROGRAM_NAME"
-	$@ "PROGRAM_DESCRIPTION: $__PROGRAM_DESCRIPTION"
-	$@ "PROGRAM_FILENAME: $__PROGRAM_FILENAME"
-	$@ "PROGRAM_ASSETS: $__PROGRAM_ASSETS"
-}
-
-if [[ "$helppassed" ]]; then
-	print "Usage: $(basename "$0") [OPTION]... [BUILD_DIR] [OUTPUT_NAME] [ROOT_DIR] [APPIMAGETOOL]"
-	print "Packages a SRB2 binary into an AppImage."
-	print "OPTIONs may be included anywhere within the arguments."
-	print ""
-	print "Arguments:"
-	print "    -h, --help              display this help and exit."
-	print "    -q, --quiet             don't display any text."
-	print "    -v, --verbose           make commands more verbose, will always print."
-	print "    -s, --small             don't copy SRB2 assets to save on bandwidth."
-	print "                            parameters regardless of --dry."
-	print "    -d, --dry               print parameters and exit."
-	print ""
-	if (( "$verbosity" > 0 )) || [[ "$dry" ]]; then
-		printSetup "print"
-	else
-		print "This should be run from a Makefile or from the directory of the build."
-		print "Make must have built the program before you run this script."
-	fi
-	exit;
-fi
-
-if (( "$verbosity" > 0 )) || [[ "$dry" ]]; then
-	printSetup "verboseOnly" "0"
-	verboseOnly 0 ""
-
-	if [[ "$dry" ]]; then
-		set -n # Enable debug mode and verbose for dry run.
-	fi
-fi
-
-# End stuff that prints and exits.
-
-if (( "$verbosity" >= 4 )); then
-	set -v # Really verbose? Print *everything*!
-fi
-
-# Define AppDir structure
-mkdir -p "$__BUILD_DIR/AppDir/usr/bin"
-mkdir -p "$__BUILD_DIR/AppDir/lib"
-mkdir -p "$__BUILD_DIR/AppDir/usr/share/applications"
-mkdir -p "$__BUILD_DIR/AppDir/usr/share/icons/hicolor/256x256/apps"
-
-# Copy program data
-if [[ ! $small ]]; then
-	verboseOnly 1 "Packaging program assets..."
-	cp -r "$__PROGRAM_ASSETS"/* "$__BUILD_DIR/AppDir/usr/bin/"
-	cp -r "$__BUILD_DIR/$__PROGRAM_FILENAME" "$__BUILD_DIR/AppDir/usr/bin"
-else
-	verboseOnly 1 "Skipping program asset packing, --small or -s passed..."
-fi
-
-verboseOnly 1 "Packaging SRB2..."
-verboseOnly 1 "Assuming executable name $__PROGRAM_FILENAME"
-cp -r "$__BUILD_DIR/$__PROGRAM_FILENAME" "$__BUILD_DIR/AppDir/usr/bin"
-
-# Copy required dependencies, but only if the program is dynamically linked.
-verboseOnly 1 "Testing if this build is dynamically linked..."
-
-set +e # Disable auto-exit for ldd.
-
-srb2Libraries="$(ldd "$__BUILD_DIR/$__PROGRAM_FILENAME")"
-exitcode="$?"
-
-set -e # Enable it again!
-
-if (( $exitcode == 0 )); then
-	verboseOnly 1 "This build *is* dynamically linked! Packaging dependencies."
-
-	# read the dynamic libraries of srb2, trim off beginning whitespace, and get the third field seperated by spaces
-	# this gives us a newline-seperated list of libraries with their full paths.
-	srb2Libraries="$(echo "$srb2Libraries" | cut -f 2 | cut -d ' ' -f 3)"
-
-	# remove any extraneous newlines around the string
-	libraryWhitelist="$(echo $libraryWhitelist | head -c -1 | tr ' ' '\n')"
-
-	# replace e.g. 'abc' with '(/abc\b)', and replace newlines with '|'.
-	# this converts it into a grep regular expression to check for any whitelisted library names.
-	libraryWhitelist="$(printf "%s" "$libraryWhitelist" | sed 's|.*|(/\0\\b)|' | tr '\n' '|')"
-
-	# grab only the entries that match the regex
-	__LDD_LIST="$(printf "%s" "$srb2Libraries" | grep -E "$libraryWhitelist")"
-
-	# use echo to convert the newline-seperated list into an argument list
-	__LDD_LIST="$(echo $__LDD_LIST)"
-
-	# read into an array because i can't be bothered iterating the lines of a string today
-	# there's so many other things in this file that'd need to be adjusted to be POSIX-compliant anyway
-	IFS=' ' read -r -a paths <<< "$__LDD_LIST"
-
-	for path in "${paths[@]}"; do
-	    if [ -f "$path" ]; then
-	        verboseOnly 2 "Packaging dependency $(basename "$path")..."
-	        cp "$path" $__BUILD_DIR/AppDir/lib/
-	    else
-	        verboseOnly 2 "Dependency $(basename "$path") not found"
-	    fi
-	done
-else
-	verboseOnly 1 "This SRB2 build is statically linked, skipping dependency packing."
-fi
-
-cd "$__BUILD_DIR/AppDir"
-
-# Copy icons
-verboseOnly 1 "Packaging resources..."
-cp "$__ROOT_DIR/srb2.png" "./usr/share/icons/hicolor/256x256/apps/$__PROGRAM_FILENAME.png"
-ln -sf "./usr/share/icons/hicolor/256x256/apps/$__PROGRAM_FILENAME.png" "./.DirIcon"
-ln -sf "./usr/share/icons/hicolor/256x256/apps/$__PROGRAM_FILENAME.png" "./$__PROGRAM_FILENAME.png"
-
-# Make desktop descriptor
-cat > "./usr/share/applications/$__PROGRAM_FILENAME.desktop" <<EOF
-[Desktop Entry]
-Type=Application
-Name=$__PROGRAM_NAME
-Comment=$__PROGRAM_DESCRIPTION
-Icon=$__PROGRAM_FILENAME
-Exec=AppRun %F
-Categories=Game;
-EOF
-
-ln -sf "./usr/share/applications/$__PROGRAM_FILENAME.desktop" "./$__PROGRAM_FILENAME.desktop"
-
-# Make entry point
-echo -e '#!'"$(dirname "$SHELL")/sh" > ./AppRun
-echo -e 'HERE="$(dirname "$(readlink -f "${0}")")"' >> ./AppRun
-echo -e 'SRB2WADDIR=$HERE/usr/bin LD_LIBRARY_PATH=$LD_LIBRARY_PATH:$HERE/lib exec $HERE/usr/bin/'"$__PROGRAM_FILENAME"' "$@"' >> ./AppRun
-chmod +x ./AppRun
-
-cd .. # now in $__BUILD_DIR
-
-# Package AppImage
-if [ -z "$__APPIMAGETOOL" ]; then
-	verboseOnly 1 "No valid appimagetool path given or detected, downloading appimagetool..."
-
-	# Print notice for internet connection.
-	important "If the command hangs here, check your internet connection, or download appimagetool and add it to your \$PATH and try compiling again."
-
-	(( "$verbosity" >= 3 )) && wget "$url" || wget -q "$url"
-
-	APPIMAGETOOL="./$(basename "$url")"
-	chmod a+x "$APPIMAGETOOL"
-else
-	verboseOnly 1 "appimagetool path given or detected, no download required."
-	APPIMAGETOOL="$__APPIMAGETOOL"
-fi
-
-verboseOnly 1 "Packing AppImage $__OUTPUT_FILENAME"
-
-if (( verbosity >= 3 )); then
-	"$APPIMAGETOOL" ./AppDir "$__OUTPUT_FILENAME"
-elif (( verbosity >= 2 )); then
-	"$APPIMAGETOOL" ./AppDir "$__OUTPUT_FILENAME" >/dev/null
-else
-	"$APPIMAGETOOL" ./AppDir "$__OUTPUT_FILENAME" >/dev/null 2>&1
-fi
-
-success "AppImage ready!"
-verboseOnly 1 "Cleaning up files..."
-rm -r ./AppDir
-
-if [ -z "$__APPIMAGETOOL" ]; then
-	rm "$APPIMAGETOOL"
-fi
-
-cd "$__ROOT_DIR" # snap back to reality

CMakeLists.txt

@@ -1,46 +1,14 @@
-cmake_minimum_required(VERSION 3.5)
-
-if(${PROJECT_SOURCE_DIR} MATCHES ${PROJECT_BINARY_DIR})
-	message(FATAL_ERROR "In-source builds will bring you a world of pain. Please make a separate directory to invoke CMake from.")
-endif()
-
+cmake_minimum_required(VERSION 3.0)
 # DO NOT CHANGE THIS SRB2 STRING! Some variable names depend on this string.
 # Version change is fine.
 project(SRB2
 	VERSION 1.6
-	LANGUAGES C CXX)
+	LANGUAGES C)
 
-set(CMAKE_CXX_STANDARD 17)
-set(CMAKE_CXX_STANDARD_REQUIRED ON)
-#set(CMAKE_CXX_EXTENSIONS OFF)    # optional but recommended: disables GNU extensions, forces pure ISO C++
-set(CMAKE_CXX_EXTENSIONS ON)
-set(CMAKE_C_EXTENSIONS ON)
-
-##### PACKAGE CONFIGURATION #####
-
-set(SRB2_CPACK_GENERATOR "" CACHE STRING "Generator to use for making a package. E.g., ZIP, TGZ, DragNDrop (OSX only). Leave blank for default generator.")
-
-if("${SRB2_CPACK_GENERATOR}" STREQUAL "")
-	if("${CMAKE_SYSTEM_NAME}" MATCHES "Windows")
-		set(SRB2_CPACK_GENERATOR "ZIP")
-	elseif("${CMAKE_SYSTEM_NAME}" MATCHES "Linux")
-		set(SRB2_CPACK_GENERATOR "TGZ")
-	elseif("${CMAKE_SYSTEM_NAME}" MATCHES "Darwin")
-		set(SRB2_CPACK_GENERATOR "TGZ")
-	endif()
+if(${PROJECT_SOURCE_DIR} MATCHES ${PROJECT_BINARY_DIR})
+	message(FATAL_ERROR "In-source builds will bring you a world of pain. Please make a separate directory to invoke CMake from.")
 endif()
 
-set(CPACK_GENERATOR ${SRB2_CPACK_GENERATOR})
-set(CPACK_PACKAGE_DESCRIPTION_SUMMARY "Sonic Robo Blast 2 Kart" CACHE STRING "Program name for display purposes")
-set(CPACK_PACKAGE_VENDOR "Kart Krew" CACHE STRING "Vendor name for display purposes")
-#set(CPACK_PACKAGE_DESCRIPTION_FILE )
-set(CPACK_RESOURCE_FILE_LICENSE "${CMAKE_CURRENT_SOURCE_DIR}/LICENSE")
-set(CPACK_PACKAGE_VERSION_MAJOR ${SRB2_VERSION_MAJOR})
-set(CPACK_PACKAGE_VERSION_MINOR ${SRB2_VERSION_MINOR})
-set(CPACK_PACKAGE_VERSION_PATCH ${SRB2_VERSION_PATCH})
-set(CPACK_PACKAGE_INSTALL_DIRECTORY "CMake ${CMAKE_VERSION_MAJOR}.${CMAKE_VERSION_MINOR}")
-include(CPack)
-
 # Set up CMAKE path
 set(CMAKE_MODULE_PATH ${CMAKE_MODULE_PATH} "${CMAKE_SOURCE_DIR}/cmake/Modules/")
 
@@ -105,7 +73,6 @@ endif()
 # OS macros
 if (UNIX)
 	add_definitions(-DUNIXCOMMON)
-	add_link_options(-rdynamic) # Use -rdynamic so a backtrace log shows function names
 endif()
 
 if(CMAKE_COMPILER_IS_GNUCC)
@@ -128,12 +95,14 @@ set(CMAKE_PDB_OUTPUT_DIRECTORY "${CMAKE_BINARY_DIR}/bin")
 
 # Set EXE names so the assets CMakeLists can refer to its target
 set(SRB2_SDL2_EXE_NAME srb2kart CACHE STRING "Executable binary output name")
+set(SRB2_WIN_EXE_NAME srb2kartdd CACHE STRING "Executable binary output name for DirectDraw build")
 
 include_directories(${CMAKE_CURRENT_BINARY_DIR}/src)
 
 add_subdirectory(src)
 add_subdirectory(assets)
 
+
 ## config.h generation
 set(GIT_EXECUTABLE "git" CACHE FILEPATH "Path to git binary")
 include(GitUtilities)
@@ -142,3 +111,25 @@ git_current_branch(SRB2_GIT_BRANCH "${CMAKE_SOURCE_DIR}")
 set(SRB2_COMP_BRANCH "${SRB2_GIT_BRANCH}")
 set(SRB2_COMP_REVISION "${SRB2_COMP_COMMIT}")
 configure_file(${CMAKE_CURRENT_SOURCE_DIR}/src/config.h.in ${CMAKE_CURRENT_BINARY_DIR}/src/config.h)
+
+##### PACKAGE CONFIGURATION #####
+
+if(${CMAKE_SYSTEM} MATCHES "Windows")
+	set(CPACK_GENERATOR "ZIP")
+endif()
+if(${CMAKE_SYSTEM} MATCHES "Linux")
+	set(CPACK_GENERATOR "TGZ")
+endif()
+if(${CMAKE_SYSTEM} MATCHES "Darwin")
+	set(CPACK_GENERATOR "DragNDrop")
+endif()
+
+set(CPACK_PACKAGE_DESCRIPTION_SUMMARY "Sonic Robo Blast 2 Kart" CACHE STRING "Program name for display purposes")
+set(CPACK_PACKAGE_VENDOR "Kart Krew" CACHE STRING "Vendor name for display purposes")
+#set(CPACK_PACKAGE_DESCRIPTION_FILE )
+set(CPACK_RESOURCE_FILE_LICENSE "${CMAKE_CURRENT_SOURCE_DIR}/LICENSE")
+set(CPACK_PACKAGE_VERSION_MAJOR ${SRB2_VERSION_MAJOR})
+set(CPACK_PACKAGE_VERSION_MINOR ${SRB2_VERSION_MINOR})
+set(CPACK_PACKAGE_VERSION_PATCH ${SRB2_VERSION_PATCH})
+set(CPACK_PACKAGE_INSTALL_DIRECTORY "CMake ${CMAKE_VERSION_MAJOR}.${CMAKE_VERSION_MINOR}")
+include(CPack)

Doxyfile

@@ -0,0 +1,269 @@
+# Doxyfile 1.4.3
+
+#---------------------------------------------------------------------------
+# Project related configuration options
+#---------------------------------------------------------------------------
+PROJECT_NAME           = SRB2
+PROJECT_NUMBER         = 1.09
+OUTPUT_DIRECTORY       = ./doc/SRB2
+CREATE_SUBDIRS         = YES
+OUTPUT_LANGUAGE        = English
+USE_WINDOWS_ENCODING   = YES
+BRIEF_MEMBER_DESC      = YES
+REPEAT_BRIEF           = YES
+ABBREVIATE_BRIEF       = "The $name class" \
+                         "The $name widget" \
+                         "The $name file" \
+                         is \
+                         provides \
+                         specifies \
+                         contains \
+                         represents \
+                         a \
+                         an \
+                         the
+ALWAYS_DETAILED_SEC    = NO
+INLINE_INHERITED_MEMB  = NO
+FULL_PATH_NAMES        = YES
+STRIP_FROM_PATH        = 
+STRIP_FROM_INC_PATH    = 
+SHORT_NAMES            = NO
+JAVADOC_AUTOBRIEF      = NO
+MULTILINE_CPP_IS_BRIEF = NO
+DETAILS_AT_TOP         = NO
+INHERIT_DOCS           = YES
+DISTRIBUTE_GROUP_DOC   = NO
+SEPARATE_MEMBER_PAGES  = NO
+TAB_SIZE               = 8
+ALIASES                = 
+OPTIMIZE_OUTPUT_FOR_C  = YES
+OPTIMIZE_OUTPUT_JAVA   = NO
+SUBGROUPING            = YES
+#---------------------------------------------------------------------------
+# Build related configuration options
+#---------------------------------------------------------------------------
+EXTRACT_ALL            = YES
+EXTRACT_PRIVATE        = YES
+EXTRACT_STATIC         = YES
+EXTRACT_LOCAL_CLASSES  = YES
+EXTRACT_LOCAL_METHODS  = NO
+HIDE_UNDOC_MEMBERS     = NO
+HIDE_UNDOC_CLASSES     = NO
+HIDE_FRIEND_COMPOUNDS  = NO
+HIDE_IN_BODY_DOCS      = NO
+INTERNAL_DOCS          = NO
+CASE_SENSE_NAMES       = NO
+HIDE_SCOPE_NAMES       = NO
+SHOW_INCLUDE_FILES     = YES
+INLINE_INFO            = YES
+SORT_MEMBER_DOCS       = YES
+SORT_BRIEF_DOCS        = NO
+SORT_BY_SCOPE_NAME     = NO
+GENERATE_TODOLIST      = YES
+GENERATE_TESTLIST      = YES
+GENERATE_BUGLIST       = YES
+GENERATE_DEPRECATEDLIST= YES
+ENABLED_SECTIONS       = 
+MAX_INITIALIZER_LINES  = 30
+SHOW_USED_FILES        = YES
+SHOW_DIRECTORIES       = YES
+FILE_VERSION_FILTER    = 
+#---------------------------------------------------------------------------
+# configuration options related to warning and progress messages
+#---------------------------------------------------------------------------
+QUIET                  = NO
+WARNINGS               = YES
+WARN_IF_UNDOCUMENTED   = YES
+WARN_IF_DOC_ERROR      = YES
+WARN_NO_PARAMDOC       = NO
+WARN_FORMAT            = "$file:$line: $text"
+WARN_LOGFILE           = 
+#---------------------------------------------------------------------------
+# configuration options related to the input files
+#---------------------------------------------------------------------------
+INPUT                  = ./src
+FILE_PATTERNS          = *.c \
+                         *.cc \
+                         *.cxx \
+                         *.cpp \
+                         *.c++ \
+                         *.d \
+                         *.java \
+                         *.ii \
+                         *.ixx \
+                         *.ipp \
+                         *.i++ \
+                         *.inl \
+                         *.h \
+                         *.hh \
+                         *.hxx \
+                         *.hpp \
+                         *.h++ \
+                         *.idl \
+                         *.odl \
+                         *.cs \
+                         *.php \
+                         *.php3 \
+                         *.inc \
+                         *.m \
+                         *.mm \
+                         *.dox
+RECURSIVE              = YES
+EXCLUDE                = ./src/sdl/IMG_xpm.c \
+                         ./src/sdl/SRB2DC/scramble.c
+EXCLUDE_SYMLINKS       = NO
+EXCLUDE_PATTERNS       = */src/hardware/*/* \
+                         */src/sdl/SDL_main/* \
+                         */src/*/*_private.h \
+                         */src/sdl/*/*help.? \
+                         */src/md5.? \
+                         */src/sdl/filter/*
+EXAMPLE_PATH           = 
+EXAMPLE_PATTERNS       = *
+EXAMPLE_RECURSIVE      = NO
+IMAGE_PATH             = 
+INPUT_FILTER           = 
+FILTER_PATTERNS        = 
+FILTER_SOURCE_FILES    = YES
+#---------------------------------------------------------------------------
+# configuration options related to source browsing
+#---------------------------------------------------------------------------
+SOURCE_BROWSER         = NO
+INLINE_SOURCES         = NO
+STRIP_CODE_COMMENTS    = YES
+REFERENCED_BY_RELATION = NO
+REFERENCES_RELATION    = NO
+#USE_HTAGS              = NO
+VERBATIM_HEADERS       = YES
+#---------------------------------------------------------------------------
+# configuration options related to the alphabetical class index
+#---------------------------------------------------------------------------
+ALPHABETICAL_INDEX     = NO
+COLS_IN_ALPHA_INDEX    = 5
+IGNORE_PREFIX          = 
+#---------------------------------------------------------------------------
+# configuration options related to the HTML output
+#---------------------------------------------------------------------------
+GENERATE_HTML          = YES
+HTML_OUTPUT            = html
+HTML_FILE_EXTENSION    = .html
+HTML_HEADER            = 
+HTML_FOOTER            = 
+HTML_STYLESHEET        = 
+HTML_ALIGN_MEMBERS     = YES
+GENERATE_HTMLHELP      = NO
+CHM_FILE               = 
+HHC_LOCATION           = 
+GENERATE_CHI           = NO
+BINARY_TOC             = NO
+TOC_EXPAND             = NO
+DISABLE_INDEX          = NO
+ENUM_VALUES_PER_LINE   = 4
+GENERATE_TREEVIEW      = YES
+TREEVIEW_WIDTH         = 250
+#---------------------------------------------------------------------------
+# configuration options related to the LaTeX output
+#---------------------------------------------------------------------------
+GENERATE_LATEX         = NO
+LATEX_OUTPUT           = latex
+LATEX_CMD_NAME         = latex
+MAKEINDEX_CMD_NAME     = makeindex
+COMPACT_LATEX          = NO
+PAPER_TYPE             = a4wide
+EXTRA_PACKAGES         = 
+LATEX_HEADER           = 
+PDF_HYPERLINKS         = NO
+USE_PDFLATEX           = NO
+LATEX_BATCHMODE        = NO
+LATEX_HIDE_INDICES     = NO
+#---------------------------------------------------------------------------
+# configuration options related to the RTF output
+#---------------------------------------------------------------------------
+GENERATE_RTF           = NO
+RTF_OUTPUT             = rtf
+COMPACT_RTF            = NO
+RTF_HYPERLINKS         = NO
+RTF_STYLESHEET_FILE    = 
+RTF_EXTENSIONS_FILE    = 
+#---------------------------------------------------------------------------
+# configuration options related to the man page output
+#---------------------------------------------------------------------------
+GENERATE_MAN           = NO
+MAN_OUTPUT             = man
+MAN_EXTENSION          = .3
+MAN_LINKS              = YES
+#---------------------------------------------------------------------------
+# configuration options related to the XML output
+#---------------------------------------------------------------------------
+GENERATE_XML           = NO
+XML_OUTPUT             = xml
+XML_SCHEMA             = 
+XML_DTD                = 
+XML_PROGRAMLISTING     = YES
+#---------------------------------------------------------------------------
+# configuration options for the AutoGen Definitions output
+#---------------------------------------------------------------------------
+GENERATE_AUTOGEN_DEF   = NO
+#---------------------------------------------------------------------------
+# configuration options related to the Perl module output
+#---------------------------------------------------------------------------
+GENERATE_PERLMOD       = NO
+PERLMOD_LATEX          = NO
+PERLMOD_PRETTY         = YES
+PERLMOD_MAKEVAR_PREFIX = 
+#---------------------------------------------------------------------------
+# Configuration options related to the preprocessor   
+#---------------------------------------------------------------------------
+ENABLE_PREPROCESSING   = YES
+MACRO_EXPANSION        = NO
+EXPAND_ONLY_PREDEF     = NO
+SEARCH_INCLUDES        = YES
+INCLUDE_PATH           = 
+INCLUDE_FILE_PATTERNS  = 
+PREDEFINED             = DOXYGEN \
+                         HWRENDER \
+                         DIRECTFULLSCREEN \
+                         HW3SOUND \
+                         LOGMESSAGES \
+                         WALLSPLATS \
+                         FLOORSPLATS
+EXPAND_AS_DEFINED      = 
+SKIP_FUNCTION_MACROS   = YES
+#---------------------------------------------------------------------------
+# Configuration::additions related to external references   
+#---------------------------------------------------------------------------
+TAGFILES               = 
+GENERATE_TAGFILE       = 
+ALLEXTERNALS           = NO
+EXTERNAL_GROUPS        = YES
+PERL_PATH              = /usr/bin/perl
+#---------------------------------------------------------------------------
+# Configuration options related to the dot tool   
+#---------------------------------------------------------------------------
+CLASS_DIAGRAMS         = YES
+HIDE_UNDOC_RELATIONS   = YES
+HAVE_DOT               = NO
+CLASS_GRAPH            = YES
+COLLABORATION_GRAPH    = YES
+GROUP_GRAPHS           = YES
+UML_LOOK               = NO
+TEMPLATE_RELATIONS     = NO
+INCLUDE_GRAPH          = YES
+INCLUDED_BY_GRAPH      = YES
+CALL_GRAPH             = NO
+GRAPHICAL_HIERARCHY    = YES
+DIRECTORY_GRAPH        = YES
+DOT_IMAGE_FORMAT       = png
+DOT_PATH               = 
+DOTFILE_DIRS           = 
+MAX_DOT_GRAPH_WIDTH    = 1024
+MAX_DOT_GRAPH_HEIGHT   = 1024
+MAX_DOT_GRAPH_DEPTH    = 1000
+DOT_TRANSPARENT        = NO
+DOT_MULTI_TARGETS      = NO
+GENERATE_LEGEND        = YES
+DOT_CLEANUP            = YES
+#---------------------------------------------------------------------------
+# Configuration::additions related to the search engine   
+#---------------------------------------------------------------------------
+SEARCHENGINE           = NO

LUASTUFF.md

@@ -13,12 +13,10 @@ Mainly for use in visual-only addons like secondcolor.
 
 **Not netsafe**. Returns player's current sliptide roll angle, taking sliptideroll cvar value into account.
 
-## hud.setVoteBackground(name[, time\_per\_frame])
+## hud.setVoteBackground(name)
 
 Changes vote background texture prefix (game looks for PREFIX + "W" or "C" (depends on resolution) + FRAME\_NUMBER).
 
-If time\_per\_frame is set, each frame will last this amount of tics, default value is 2
-
 ## hud.add(fn, "vote") and hud.add(fn, "intermission")
 
 Hud hooks for vote screen and intermission screen. They only get drawer (`v`) as argument.
@@ -30,10 +28,6 @@ exist.
 Returns the values of the given HUD item's `xoffset`/`yoffset` cvars.
 Available for any HUD item with offset cvars.
 
-## patch = v.cachePatchRotated(name, rollangle)
-Like v.cachePatch, it caches a new patch with the corresponding name. Unlike v.cachePatch, however,
-a rollangle can be supplied to the function so that it returns a rotated patch instead.
-
 ## x, y, flags = v.getDrawInfo(item)
 
 Returns the X, Y and flags where the given HUD item will be drawn for the current displayplayer.
@@ -122,11 +116,6 @@ v.interpLatch(false)
 ```
 When using a custom string drawer, enable this mode to avoid interpolation artifacting when the string changes.
 
-## cameras[] global array
-
-Local player cameras that can be accessed outside of hud hooks.
-`#cameras` will return amount of available cameras. (0 on dedicated server, 1 with 1 player, 4 with 4p splitscreen, etc)
-
 ## mobj.spritexscale, mobj.spriteyscale, mobj.spritexoffset, mobj.spriteyoffset, mobj.rollangle, mobj.sloperoll, mobj.rollmodel fields
 
 Same fields as in SRB2 2.2
@@ -141,84 +130,3 @@ if rawget(_G, "S_StopSoundByNum") ~= nil then
     ... -- Can use it
 end
 ```
-## addHook("ServerJoin", function())
-
-ServerJoin hook called when client joins server (starting a listen server also calls it for host).
-Generally it was made to make loading custom config files less hacky, but can be used for anything else too.
-
-## player.viewrollangle field
-
-Returns player's current view roll angle for the Screen Tilting feature, useful for HUD elements.
-
-## G_SetPlayerGamepadIndicatorColor(player, skincolor)
-
-Set a custom color for Supported Gamepads with RGB LED functionality.
-To be used with Displayplayers.
-Only takes Skincolors.
-Best to be used in a Loop to ensure the color wont get overwritten by the game.
-
-## G_PlayerDeviceRumble(player, low_strength, high_strength, -optional- duration)
-
-Add Gamepad Rumble support for things.
-To be used with Displayplayers.
-Duration is in milliseconds and is optional to set, default value is 84ms.
-
-## P_CheckSightFast(mo1, mo2)
-
-Exactly same as P_CheckSight but uses cheaper algorithm, useful for things like nametags. Doesn't work exactly
-like P_CheckSight so don't use it for anything gameplay-related.
-
-## musicdef_t
-
-Userdata structure representing a musicdef. Fields:
-
-`musicdef.name` - song identifier ("kmap01" for example).
-
-`musicdef.usage`, `musicdef.source` - fields from vanilla MUSICDEFS lump.
-
-`musicdef.filename` - unused for now.
-
-`musicdef.title`, `musicdef.alttitle`, `musicdef.authors` - fields from MUSCINFO lump.
-
-`#musicdef` - returns integer id for musicdef (which can be used as index in `musicdefs`).
-
-All fields are read-only.
-
-## S_FindMusicCredit(name)
-
-Returns musicdef corresponding to music with given identifier. For example, `S_FindMusicCredit("kmap01")` will return
-musicdef for green hills music.
-
-## musicdefs
-
-Global table for all musicdefs, similar to mobjinfo, states, etc. Can take either integer indices,
-from `0` to `#musicdefs-1`, or string indices (which is equal to calling `S_FindMusicCredit`).
-
-## addHook("MusicCredit", function(musicdef))
-
-Hook is called whenever `S_ShowMusicCredit` (either from game or mod) is called. Takes musicdef as only argument, returning true
-will overwrite vanilla behavior (not show music credit), can be used to implement custom music credit pop-ups.
-
-## addHook("SetupVote", function(result, gt, secondgt, prevmap))
-
-Hook is called whenever server sets up options for vote screen. `result` is table where lua can store options to,
-(for example, `result[1] = 1` will force green hills as first option), gt is current gametype, secondgt is
-alternative gametype picked for 3rd entry (for example, gt can be `GT_RACE`, and secondgt can be `GT_MATCH`)
-prevmap is the previous map that was played (small note - in game code, it is offset by -1, but for lua its offset back,
-so if previous gamemap was 1, prevmap would also be 1. Which means you can safely do mapheaderinfo[prevmap] to get info on previous map)
-
-Limitations: currently, game can only change gametype for 3rd option in map (meaning for example, if current gametype is race, and you
-put battle map in first option, when it gets picked that map will be still run in race gametype). That means, game will only handle maps with
-different gametype if it is put in 3rd vote option.
-
-# Other changes
-
-## P_PlayRinglossSound(source, damager)
-
-Add optional `damager` argument (should be `mobj_t`), which causes hurt sound also play for damager
-if `karthitemdialog` option is enabled
-
-## K_PlayHitEmSound(mobj, victim)
-
-Add optional `victim` argument (should be a player's `mobj_t`), which causes "hit em" sound to be
-delayed and played for victim too if `karthitemdialog` option is enabled

Makefile

@@ -1,8 +0,0 @@
-ifdef SILENT
-MAKEFLAGS+=--no-print-directory
-endif
-
-all :
-
-% ::
-	@$(MAKE) -C src $(MAKECMDGOALS)

README.md

@@ -1,36 +1,103 @@
-# SRB2Kart-Saturn
-
-SRB2Kart-Saturn is a modification of SRB2Kart with a focus on new Features, Fixes, Optimizations and general Improvements, all while retaining 100% compatibility with vanilla SRB2Kart.
+# SRB2Kart: Saturn
 
 [SRB2Kart](https://srb2.org/mods/) is a kart racing mod based on the 3D Sonic the Hedgehog fangame [Sonic Robo Blast 2](https://srb2.org/), based on a modified version of [Doom Legacy](http://doomlegacy.sourceforge.net/).
 
-For more information on Saturn´s features check out the changelogs on the [Releases](https://github.com/Indev450/SRB2Kart-Saturn/releases) page and the ingame "Saturn Options" menu.
+## Saturn Features (Take a look at the "Saturn Options" menu c;)
 
-Also be sure to check the LUASTUFF file for more information on all the extra lua features Saturn has.
+- Sprites player rotation on slopes; going on hills, levitate, going down, and so on alters your sprites (configurable)
+- You can alter all the base kart HUD element offsets on the fly in the Saturn Options settings menu
+- `addfilelocal` Command, for those who want to use things like their custom hud in netgames (Same as addfile but completely client sided)
+- Palette rendering, make the OpenGL renderer (almost) look like software mode!
+- OpenMPT for Tracker module playback instead of GME
+  - Fixes looping and sounds better
+  - Allows filter configuration
+- Colourize your Kart HUD, to either your player color or whichever colour you like! (optional / requieres extra2.kart file)
+- The minimal brightness with Shaders can be configured, now you can seeeee in dark areas (0-255 , uses Sector brightness values)
+- Lua HUD hooks for Intermission (ex: You can make hostmod votes still visible during intermission!)
+- Lua HUD hooks for Vote Screen (ex: You can make hostmod votes still visible during map vote screen!)
+- Saltyhop! do a funny hop
+- Smaller Speedometer (optional / requieres extra.kart file)
+- Record Attack input display can now be used everywhere
+- Smaller minimap icons and also show player names on the minimap (toggable)
+- Support for animated votescreens!
+- `showmusiccredit` command, shows you the current music track again
+- `listskins` show a list of all skins currently loaded
+- Visual Portals from Haya's HEP Client
+- Horizonline effect in OpenGL (watch the endless bricks on SNES Bowsers Castle!)
+- Localskins! use whatever skin you like!
+- Toggable lowercase menu's also from Haya's HEP client
+- Everything that Galaxy has
 
-We also have a Flatpak available on [Flathub](https://flathub.org/en/apps/org.srb2.SRB2Kart-Saturn)! (many thanks to riomccloud!)
+## Improvements / Bug fixes
+
+- Replay size has been increased to 10MiB minimum, to make replay overflows very unlikely to happen
+  - can be set to 100MiB max with `maxdemosize` command in console
+- Music changes now properly show the music credits (ex: Kart maps with easter eggs that alter the music)
+ - The mapper still has to provide a MusicDEF for this to work.
+- Configurable chatlog length (yay can read those messages from 30 mins ago without opening log.txt)
+- Configurable timeout for waiting to join a full server (in vanilla this is capped to 5 minutes before it boots you out)
+- Characters now spin in skin selection menu (configurable)
+- HTTP Addon download speed has been raised dramatically
+  - configurable with `downloadspeed` command
+- HWR Drawnodes have been refactored, this should fix a few rare crashes esp in regards to OpenGL Visportals
+- The Position Number in the corner is alot smaller now (half the size!)
+- Toggable Lap animation
+- Main menu shows the current renderer being used
+- MSAA and A2C Antialiasing support (Configurable in renderer.txt file)
+- A simple button to rejoin your last visited server
+- Ability to show ALL maps in the mapselect screen, this includes hidden or hellmaps "showallmaps yes/no"
+- Ability to toggle the Stagetitlecard "maptitles on/off"
+
+## Performance / Debugging
+
+- Access for `mobj_t` and `player_t` fields from Lua has been completely rewritten, for much better performance with many Lua scripts
+- Lua shows Tracebacks whenever an error occurs
+- The Lua Perfstats page now has multiple pages and is more organized (ps_thinkframe_page X in console)
+- People with lower end hardware can disable "screen textures" with "gr_screentextures" command, huge performance gain with minimal visual loss
+  - Intermission backgrounds, heat wave effects and etc are broken with this
+- `ffloorclip`, exclusive to Software, which boosts performance on maps with many Floor over Floor sectors
+
+## Technical fixes
+
+- ZFigthing Textures in Opengl mode have been fixed in engine (well almost all of it)
+- FOFs intersecting with slopes have less issues and now render correctly in Opengl
+- Midtextures on slopes in Opengl are fixed, many weird guardrails and fences, aswell as some of those sticking out textures from the ground on some maps should be gone
+- The annoying depraction messages for `P_TeleportMove` and `P_AproxDistance` have been silenced
+- Silenced the annoying "cant find next map..." messages as theyre super useless and annoying anyways
+- Added a small cooldown on `map` command due to spamming causing a SIGSEGV
+- Many bugfixes to the Software renderer, so its much less prone to crashing
+- Many bugfixes to the OpenGL renderer (too many too list all of them here; check the changelogs for more information)
+- Bugfixes to the soundsystem, mainly regarding Sound muting
+- Refactored Zone Memory Allocations (helps a bit with large maps)
+- Many many more crash fixes and other bugfixes to the basegame (too many too list all of them here; check the changelogs for more information)
+
+- Crash Backtraces have been replaced by libbacktrace (except for 32bit Windows builds)
+Crashlogs now contain alot more informations. and even more if your build has debug symbols
+Also allows 64bit Windows builds to produce Crashlogs!
+
+## MISC
+- Bird's Camara Tilting feature is no longer turned on by default
+- Bird's warning on the title screen has been removed
+
+## Bugs
+- On maps which change the song multiple times on map start (exp: Wandering Falls) may show multiple music credits appearing
+- A2C antialiasing makes transparent surfaces even more transparent
+- You tell us! c:
+
+## Note
+Check the LUASTUFF file for more information on all the lua things Saturn has.
 
 ## Dependencies
 - SDL2 (Linux/OS X only)
 - SDL2-Mixer (Linux/OS X only)
+- libupnp (Linux/OS X only)
 - libgme (Linux/OS X only)
 - libopenmpt (Linux/OS X only)
-- libbacktrace (Linux/OS X only, optional, disable support with NOLIBBACKTRACE)
-- libupnp (Linux/OS X only, optional, enable support with HAVE_MINIUPNPC)
+- libbacktrace (Linux/OS X only)
 
 ## Compiling
 
 See [SRB2 Wiki/Source code compiling](http://wiki.srb2.org/wiki/Source_code_compiling). The compiling process for SRB2Kart is largely identical to SRB2.
 
-For Windows only the Makefile build system with GCC or Clang compiler is supported.
-Visual C++ (MSVC) is unsupported.
-
-64-bit Windows builds are supported and recommended over 32-bit builds, they will build automatically when using the MSYS2 MinGW 64-bit executable (requires the mingw-w64-x86_64-gcc package), no extra flags needed!
-The specific DLLs can be found under /libs/dll-binaries/(i686 for 32bit/x86_64 for 64-bit)/ or in the Release packages
-
-MacOS and Linux can be build with CMake, but it is recommended to use the Makefile for Linux over CMake
-
-Alternatively the [srb2bld](https://github.com/Bijman/srb2bld) script by Bijman can be used aswell!
-
 ## Disclaimer
 Kart Krew is in no way affiliated with SEGA or Sonic Team. We do not claim ownership of any of SEGA's intellectual property used in SRB2.

appveyor.yml

@@ -0,0 +1,133 @@
+version: 1.3.{branch}-{build}
+os: MinGW
+
+environment:
+ CC: ccache
+ CCACHE_CC: i686-w64-mingw32-gcc
+ CCACHE_CC_64: x86_64-w64-mingw32-gcc
+ WINDRES: windres
+ # c:\mingw-w64 i686 has gcc 6.3.0, so use c:\msys64 7.3.0 instead
+ MINGW_SDK: c:\msys64\mingw32
+ # c:\msys64 x86_64 has gcc 8.2.0, so use c:\mingw-w64 7.3.0 instead
+ MINGW_SDK_64: C:\mingw-w64\x86_64-8.1.0-posix-seh-rt_v6-rev0\mingw64
+ CFLAGS: -Wall -W -Werror -Wno-error=implicit-fallthrough -Wimplicit-fallthrough=3 -Wno-tautological-compare -Wno-error=suggest-attribute=noreturn
+ UPX_ZIP: upx391w
+ UPX_URL: http://upx.sourceforge.net/download/upx391w.zip
+ CCACHE_EXE: ccache.exe
+ CCACHE_URL: http://alam.srb2.org/ccache.exe
+ CCACHE_COMPRESS: true
+ CCACHE_DIR: C:\Users\appveyor\.ccache
+ # Disable UPX by default. The user can override this in their Appveyor project settings
+ NOUPX: 1
+ ##############################
+ # DEPLOYER VARIABLES
+ # DPL_ENABLED=1 builds installers for branch names starting with `deployer`.
+ # DPL_TAG_ENABLED=1 will also build installers for release tags. DPL_ENABLED=1 must also be set.
+ # Set these in the Appveyor project settings
+ ##############################
+ DPL_ENABLED: 0
+ DPL_TAG_ENABLED: 0
+ DPL_INSTALLER_NAME: srb2kart-v13
+ # Asset handling is barebones vs. Travis Deployer. We operate on 7z only.
+ # Include the README files and the OpenGL batch in the main and patch archives.
+ # The x86/x64 archives contain the DLL binaries.
+ ASSET_ARCHIVE_PATH: https://github.com/mazmazz/Kart-Public/releases/download/kart_assets/srb2kart-v102-assets.7z
+ ASSET_ARCHIVE_PATCH_PATH: https://github.com/mazmazz/Kart-Public/releases/download/kart_assets/srb2kart-v102-patch-assets.7z
+ ASSET_ARCHIVE_X86_PATH: https://github.com/mazmazz/Kart-Public/releases/download/kart_assets/srb2kart-v102-x86-assets.7z
+ ASSET_ARCHIVE_X64_PATH: https://github.com/mazmazz/Kart-Public/releases/download/kart_assets/srb2kart-v102-x64-assets.7z
+ ASSET_ARCHIVE_OPTIONAL_PATH: https://github.com/mazmazz/Kart-Public/releases/download/kart_assets/srb2kart-v102-optional-assets.7z
+ # This is overridden to 1 for release tag builds
+ ASSET_FILES_OPTIONAL_GET: 0
+ # For patches, also include the X86/X64 DLLs.
+ PACKAGE_PATCH_DLL_GET: 0
+ # Delete all asset downloads so they can be redownloaded
+ ASSET_CLEAN: 0
+
+cache:
+- upx391w.zip
+- ccache.exe
+- C:\Users\appveyor\.ccache
+- C:\Users\appveyor\srb2_cache
+
+install:
+- if [%CONFIGURATION%] == [SDL64] ( set "X86_64=1" )
+- if [%CONFIGURATION%] == [SDL64] ( set "CONFIGURATION=SDL" )
+- if [%X86_64%] == [1] ( set "MINGW_SDK=%MINGW_SDK_64%" )
+- if [%X86_64%] == [1] ( set "CCACHE_CC=%CCACHE_CC_64%" )
+
+- if not exist "%UPX_ZIP%.zip" appveyor DownloadFile "%UPX_URL%" -FileName "%UPX_ZIP%.zip"
+- 7z x -y "%UPX_ZIP%.zip" -o%TMP% >null
+- robocopy /S /xx /ns /nc /nfl /ndl /np /njh /njs "%TMP%\%UPX_ZIP%" "%MINGW_SDK%\bin" upx.exe || exit 0
+
+- if not exist "%CCACHE_EXE%" appveyor DownloadFile "%CCACHE_URL%" -FileName "%CCACHE_EXE%"
+- ccache -M 99M
+- xcopy /Y /V /I ccache.exe "%MINGW_SDK%\bin"
+
+configuration:
+- SDL
+#- SDL64
+
+before_build:
+- set "Path=%MINGW_SDK%\bin;%Path%"
+- if [%X86_64%] == [1] ( x86_64-w64-mingw32-gcc --version ) else ( i686-w64-mingw32-gcc --version )
+- mingw32-make --version
+- if not [%NOUPX%] == [1] ( upx -V )
+- ccache -V
+- ccache -s
+- if [%NOUPX%] == [1] ( set "NOUPX=NOUPX=1" ) else ( set "NOUPX=" )
+- if defined [%APPVEYOR_PULL_REQUEST_HEAD_COMMIT%] ( set "COMMIT=%APPVEYOR_PULL_REQUEST_HEAD_COMMIT%" ) else ( set "COMMIT=%APPVEYOR_REPO_COMMIT%" )
+- cmd: git rev-parse --short %COMMIT%>%TMP%/gitshort.txt
+- cmd: set /P GITSHORT=<%TMP%/gitshort.txt
+# for pull requests, take the owner's name only, if this isn't the same repo of course
+- set "REPO=%APPVEYOR_REPO_BRANCH%"
+- if not [%APPVEYOR_PULL_REQUEST_HEAD_REPO_NAME%] == [] ( if not [%APPVEYOR_PULL_REQUEST_HEAD_REPO_NAME%] == [%APPVEYOR_REPO_NAME%] (  for /f "delims=/" %%a in ("%APPVEYOR_PULL_REQUEST_HEAD_REPO_NAME%") do set "REPO=%%a-%APPVEYOR_PULL_REQUEST_HEAD_REPO_BRANCH%" ) )
+- set "EXENAME=EXENAME=srb2win-%REPO%-%GITSHORT%.exe"
+- set "SRB2_MFLAGS=-C src WARNINGMODE=1 CCACHE=1 NOOBJDUMP=1 %NOUPX% %EXENAME%"
+- if [%X86_64%] == [1] ( set "MINGW_FLAGS=MINGW64=1 X86_64=1 GCC81=1" ) else ( set "MINGW_FLAGS=MINGW=1 GCC91=1" )
+- set "SRB2_MFLAGS=%SRB2_MFLAGS% %MINGW_FLAGS% %CONFIGURATION%=1"
+
+build_script:
+- cmd: mingw32-make.exe %SRB2_MFLAGS% clean
+- cmd: mingw32-make.exe %SRB2_MFLAGS% ERRORMODE=1 -k
+
+after_build:
+- if [%X86_64%] == [1] (
+    set "BUILD_PATH=bin\Mingw64\Release"
+  ) else (
+    set "BUILD_PATH=bin\Mingw\Release"
+  )
+- if [%X86_64%] == [1] ( set "CONFIGURATION=%CONFIGURATION%64" )
+- ccache -s
+- set BUILD_ARCHIVE=%REPO%-%GITSHORT%-%CONFIGURATION%.7z
+- set BUILDSARCHIVE=%REPO%-%CONFIGURATION%.7z
+- cmd: 7z a %BUILD_ARCHIVE% %BUILD_PATH% -xr!.gitignore
+- appveyor PushArtifact %BUILD_ARCHIVE%
+- cmd: copy %BUILD_ARCHIVE% %BUILDSARCHIVE%
+- appveyor PushArtifact %BUILDSARCHIVE%
+##############################
+# DEPLOYER SCRIPT
+##############################
+- if [%DPL_ENABLED%] == [1] ( call "deployer\appveyor\deployer.bat" )
+
+test: off
+
+#deploy:
+#  - provider: FTP
+#    protocol: ftps
+#    host:
+#      secure: NsLJEPIBvmwCOj8Tg8RoRQ==
+#    username:
+#      secure: ejxi5mvk7oLYu7QtbYojajEPigMy0mokaKhuEVuDZcA=
+#    password:
+#      secure: Hbn6Uy3lT0YZ88yFJ3aW4w==
+#    folder: appveyor
+#    application:
+#    active_mode: false
+#    on:
+#      branch: master
+#      appveyor_repo_tag: true
+
+
+on_finish:
+#- cmd: echo xfreerdp /u:appveyor /cert-ignore +clipboard /v:<ip>:<port>
+#- ps: $blockRdp = $true; iex ((new-object net.webclient).DownloadString('https://raw.githubusercontent.com/appveyor/ci/master/scripts/enable-rdp.ps1'))

assets/CMakeLists.txt

@@ -1,10 +1,5 @@
 ## Assets Target Configuration ##
 
-if(${CMAKE_SYSTEM} MATCHES Linux)
-	# Asset installation isn't part of the Linux target
-	return()
-endif()
-
 # For prepending the current source path, later
 FUNCTION(PREPEND var prefix)
    SET(listVar "")

assets/LICENSE-3RD-PARTY.txt

@@ -30,24 +30,6 @@ CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
 ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
 POSSIBILITY OF SUCH DAMAGE.
 
---------------------------------------------------------------------------------
-                        0-Clause BSD License
-        applies to:
-        - qs22k
-          Copyright (c) 2022, Raymond Gardner
---------------------------------------------------------------------------------
-
-Permission to use, copy, modify, and/or distribute this software for any
-purpose with or without fee is hereby granted.
-
-THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
-WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
-MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY
-SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
-WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
-ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF OR
-IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
-
 --------------------------------------------------------------------------------
                         curl License
         applies to:

bin/FreeBSD/Debug/.gitignore

@@ -0,0 +1,2 @@
+# DON'T REMOVE
+# This keeps the folder from disappearing

bin/FreeBSD/Release/.gitignore

@@ -0,0 +1,2 @@
+# DON'T REMOVE
+# This keeps the folder from disappearing

bin/Linux/Debug/.gitignore

@@ -0,0 +1 @@
+/lsdlsrb2

bin/Linux/Release/.gitignore

@@ -0,0 +1,3 @@
+/lsdlsrb2
+/pnd
+/*.mo

bin/Linux64/Debug/.gitignore

@@ -0,0 +1 @@
+/lsdlsrb2

bin/Linux64/Release/.gitignore

@@ -0,0 +1 @@
+/lsdlsrb2

bin/Mingw/Debug/.gitignore

@@ -0,0 +1,4 @@
+*.exe
+*.mo
+r_opengl.dll
+*.bat

bin/Mingw/Release/.gitignore

@@ -0,0 +1,4 @@
+*.exe
+*.mo
+r_opengl.dll
+*.bat

bin/Mingw64/Debug/.gitignore

@@ -0,0 +1,3 @@
+/srb2sdl.exe
+/srb2win.exe
+/r_opengl.dll

bin/Mingw64/Release/.gitignore

@@ -0,0 +1,4 @@
+*.exe
+*.mo
+r_opengl.dll
+*.bat

bin/SDL/Debug/.gitignore

@@ -0,0 +1,2 @@
+# DON'T REMOVE
+# This keeps the folder from disappearing

bin/SDL/Release/.gitignore

@@ -0,0 +1,2 @@
+# DON'T REMOVE
+# This keeps the folder from disappearing

bin/dummy/.gitignore

@@ -0,0 +1,2 @@
+# DON'T REMOVE
+# This keeps the folder from disappearing

cmake/Modules/FindGME.cmake

@@ -1,6 +1,6 @@
 include(LibFindMacros)
 
-libfind_pkg_check_modules(GME_PKGCONF LIBGME)
+libfind_pkg_check_modules(GME_PKGCONF GME)
 
 find_path(GME_INCLUDE_DIR
 	NAMES gme.h
@@ -8,7 +8,6 @@ find_path(GME_INCLUDE_DIR
 		${GME_PKGCONF_INCLUDE_DIRS}
 		"/usr/include/gme"
 		"/usr/local/include/gme"
-	PATH_SUFFIXES gme
 )
 
 find_library(GME_LIBRARY
@@ -21,4 +20,4 @@ find_library(GME_LIBRARY
 
 set(GME_PROCESS_INCLUDES GME_INCLUDE_DIR)
 set(GME_PROCESS_LIBS GME_LIBRARY)
-libfind_process(GME)
+libfind_process(GME)

cmake/Modules/FindOPENMPT.cmake

@@ -1,6 +1,6 @@
 include(LibFindMacros)
 
-libfind_pkg_check_modules(OPENMPT_PKGCONF LIBOPENMPT)
+libfind_pkg_check_modules(OPENMPT_PKGCONF OPENMPT)
 
 find_path(OPENMPT_INCLUDE_DIR
 	NAMES libopenmpt.h
@@ -8,7 +8,6 @@ find_path(OPENMPT_INCLUDE_DIR
 		${OPENMPT_PKGCONF_INCLUDE_DIRS}
 		"/usr/include/libopenmpt"
 		"/usr/local/include/libopenmpt"
-	PATH_SUFFIXES libopenmpt
 )
 
 find_library(OPENMPT_LIBRARY
@@ -21,4 +20,4 @@ find_library(OPENMPT_LIBRARY
 
 set(OPENMPT_PROCESS_INCLUDES OPENMPT_INCLUDE_DIR)
 set(OPENMPT_PROCESS_LIBS OPENMPT_LIBRARY)
-libfind_process(OPENMPT)
+libfind_process(OPENMPT)

cmake/Modules/Findlibbacktrace.cmake

@@ -1,33 +0,0 @@
-include(LibFindMacros)
-
-libfind_pkg_check_modules(LIBBACKTRACE_PKGCONF LIBBACKTRACE)
-
-find_path(LIBBACKTRACE_INCLUDE_DIR
-	NAMES backtrace.h
-	PATHS
-		${LIBBACKTRACE_PKGCONF_INCLUDE_DIRS}
-		"/usr/include"
-		"/usr/local/include"
-)
-
-find_library(LIBBACKTRACE_LIBRARY
-	NAMES backtrace
-	PATHS
-		${LIBBACKTRACE_PKGCONF_LIBRARY_DIRS}
-		"/usr/lib"
-		"/usr/local/lib"
-)
-
-set(LIBBACKTRACE_PROCESS_INCLUDES LIBBACKTRACE_INCLUDE_DIR)
-set(LIBBACKTRACE_PROCESS_LIBS LIBBACKTRACE_LIBRARY)
-libfind_process(LIBBACKTRACE)
-
-if(LIBBACKTRACE_FOUND AND NOT TARGET libbacktrace)
-	add_library(libbacktrace UNKNOWN IMPORTED)
-	set_target_properties(
-		libbacktrace
-		PROPERTIES
-		IMPORTED_LOCATION "${LIBBACKTRACE_LIBRARY}"
-		INTERFACE_INCLUDE_DIRECTORIES "${LIBBACKTRACE_INCLUDE_DIR}"
-	)
-endif()

cmake/Modules/LibFindMacros.cmake

@@ -1,4 +1,4 @@
-# Version 2.4
+# Version 2.2
 # Public Domain, originally written by Lasse Kärkkäinen <tronic>
 # Maintained at https://github.com/Tronic/cmake-modules
 # Please send your improvements as pull requests on Github.
@@ -52,10 +52,6 @@ function (libfind_pkg_detect PREFIX)
   if (libraryargs)
     find_library(${PREFIX}_LIBRARY NAMES ${libraryargs} HINTS ${${PREFIX}_PKGCONF_LIBRARY_DIRS})
   endif()
-  # Read pkg-config version
-  if (${PREFIX}_PKGCONF_VERSION)
-    set(${PREFIX}_VERSION ${${PREFIX}_PKGCONF_VERSION} PARENT_SCOPE)
-  endif()
 endfunction()
 
 # Extracts a version #define from a version.h file, output stored to <PREFIX>_VERSION.
@@ -129,39 +125,24 @@ function (libfind_process PREFIX)
 
   # Process deps to add to
   foreach (i ${PREFIX} ${${PREFIX}_DEPENDENCIES})
-    if (DEFINED ${i}_INCLUDE_OPTS)
+    if (DEFINED ${i}_INCLUDE_OPTS OR DEFINED ${i}_LIBRARY_OPTS)
       # The package seems to export option lists that we can use, woohoo!
       list(APPEND includeopts ${${i}_INCLUDE_OPTS})
-    else()
-      if (DEFINED ${i}_INCLUDE_DIR)
-        # Singular forms can be used
-        list(APPEND includeopts ${i}_INCLUDE_DIR)
-      else()
-        if (DEFINED ${i}_INCLUDE_DIRS)
-          # Plural forms can be used
-          list(APPEND includeopts ${i}_INCLUDE_DIRS)
-        else()
-          # Oh no, we don't know the option names
-          message(FATAL_ERROR "We couldn't determine config variable names for ${i} includes. Aieeh!")
-        endif()
-      endif()
-    endif()
-
-    if (DEFINED ${i}_LIBRARY_OPTS)
-      # The package seems to export option lists that we can use, woohoo!
       list(APPEND libraryopts ${${i}_LIBRARY_OPTS})
     else()
-      if (DEFINED ${i}_LIBRARY)
+      # If plural forms don't exist or they equal singular forms
+      if ((NOT DEFINED ${i}_INCLUDE_DIRS AND NOT DEFINED ${i}_LIBRARIES) OR
+          ({i}_INCLUDE_DIR STREQUAL ${i}_INCLUDE_DIRS AND ${i}_LIBRARY STREQUAL ${i}_LIBRARIES))
         # Singular forms can be used
-        list(APPEND libraryopts ${i}_LIBRARY)
-      else()
-        if (DEFINED ${i}_LIBRARIES)
-          # Plural forms can be used
-          list(APPEND libraryopts ${i}_LIBRARIES)
-        else()
-          # Oh no, we don't know the option names
-          message(FATAL_ERROR "We couldn't determine config variable names for ${i} libraries. Aieeh!")
+        if (DEFINED ${i}_INCLUDE_DIR)
+          list(APPEND includeopts ${i}_INCLUDE_DIR)
         endif()
+        if (DEFINED ${i}_LIBRARY)
+          list(APPEND libraryopts ${i}_LIBRARY)
+        endif()
+      else()
+        # Oh no, we don't know the option names
+        message(FATAL_ERROR "We couldn't determine config variable names for ${i} includes and libs. Aieeh!")
       endif()
     endif()
   endforeach()
@@ -228,12 +209,12 @@ function (libfind_process PREFIX)
         message(STATUS "  ${PREFIX}_LIBRARY_OPTS=${libraryopts}")
         message(STATUS "  ${PREFIX}_LIBRARIES=${libs}")
       endif()
+      set (${PREFIX}_INCLUDE_OPTS ${includeopts} PARENT_SCOPE)
+      set (${PREFIX}_LIBRARY_OPTS ${libraryopts} PARENT_SCOPE)
+      set (${PREFIX}_INCLUDE_DIRS ${includes} PARENT_SCOPE)
+      set (${PREFIX}_LIBRARIES ${libs} PARENT_SCOPE)
+      set (${PREFIX}_FOUND TRUE PARENT_SCOPE)
     endif()
-    set (${PREFIX}_INCLUDE_OPTS ${includeopts} PARENT_SCOPE)
-    set (${PREFIX}_LIBRARY_OPTS ${libraryopts} PARENT_SCOPE)
-    set (${PREFIX}_INCLUDE_DIRS ${includes} PARENT_SCOPE)
-    set (${PREFIX}_LIBRARIES ${libs} PARENT_SCOPE)
-    set (${PREFIX}_FOUND TRUE PARENT_SCOPE)
     return()
   endif()
 

comptime.bat

@@ -1,32 +1,32 @@
-@echo off
-set BRA=Unknown
-set REV=illegal
-
-copy nul: /b +%1\comptime.c tmp.$$$ > nul
-move tmp.$$$ %1\comptime.c > nul
-
-if exist .git goto gitrev
-if exist ..\.git goto gitrev
-if exist .svn goto svnrev
-goto filwri
-
-:gitrev
-set GIT=%2
-if "%GIT%"=="" set GIT=git
-for /f "usebackq" %%s in (`%GIT% rev-parse --abbrev-ref HEAD`) do @set BRA=%%s
-for /f "usebackq" %%s in (`%GIT% rev-parse HEAD`) do @set REV=%%s
-set REV=%REV:~0,8%
-goto filwri
-
-:svnrev
-set BRA=Subversion
-for /f "usebackq" %%s in (`svnversion .`) do @set REV=%%s
-set REV=r%REV%
-goto filwri
-
-:filwri
-echo // Do not edit!  This file was autogenerated > %1\comptime.h
-echo // by the %0 batch file >> %1\comptime.h
-echo // >> %1\comptime.h
-echo const char* compbranch = "%BRA%"; >> %1\comptime.h
-echo const char* comprevision = "%REV%"; >> %1\comptime.h
+@echo off
+set BRA=Unknown
+set REV=illegal
+
+copy nul: /b +%1\comptime.c tmp.$$$ > nul
+move tmp.$$$ %1\comptime.c > nul
+
+if exist .git goto gitrev
+if exist ..\.git goto gitrev
+if exist .svn goto svnrev
+goto filwri
+
+:gitrev
+set GIT=%2
+if "%GIT%"=="" set GIT=git
+for /f "usebackq" %%s in (`%GIT% rev-parse --abbrev-ref HEAD`) do @set BRA=%%s
+for /f "usebackq" %%s in (`%GIT% rev-parse HEAD`) do @set REV=%%s
+set REV=%REV:~0,8%
+goto filwri
+
+:svnrev
+set BRA=Subversion
+for /f "usebackq" %%s in (`svnversion .`) do @set REV=%%s
+set REV=r%REV%
+goto filwri
+
+:filwri
+echo // Do not edit!  This file was autogenerated > %1\comptime.h
+echo // by the %0 batch file >> %1\comptime.h
+echo // >> %1\comptime.h
+echo const char* compbranch = "%BRA%"; >> %1\comptime.h
+echo const char* comprevision = "%REV%"; >> %1\comptime.h

comptime.sh

@@ -17,7 +17,7 @@ EOF
 
 versiongit() {
 	gitbranch="$(git rev-parse --abbrev-ref HEAD)"
-	gitversion="$(git show --pretty=format:'%h %s' -s HEAD | sed 's/"/\\"/g')"
+	gitversion="$(git rev-parse HEAD | cut -c -8)"
 	version "$gitbranch" "$gitversion";
 	exit 0
 }

debian-template/README.Debian

@@ -0,0 +1,70 @@
+srb2 for Debian
+---------------
+
+SRB2 Debian package!
+Hi there, to rebuild these packages just use debuild in the root source directory (not /src!).
+You can build these with or without a key if you want, but if you want to put these on a repo,
+generate your own GnuPG key as per the https://help.ubuntu.com/community/GnuPrivacyGuardHowto
+instructions and pass the -k<keyid> command to debuild. Make sure you export the key footprint
+and give them to your users to install with apt-key add. Thanks!
+
+ -- Callum Dickinson <gcfreak_ag20@hotmail.com>  Fri, 26 Nov 2010 18:25:31 +1300
+
+---------------
+
+
+Templating
+
+Note that you MUST run [repo-root]/debian_template.sh before running debuild
+on these scripts! debian_template.sh fills these template files with working values.
+
+You should also set PACKAGE_NAME_EMAIL="John Doe <jdoe@example.com>" to match
+the identity of the key you will use to sign the package.
+
+
+Building for Launchpad PPA
+
+Use these steps to prepare building a source package for Launchpad:
+
+    1. cd [repo-root]
+    2. git reset --hard; git clean -fd; git clean -fx;
+       * Resets your repo folder to a committed state and removes untracked files
+       * If you built srb2-data in the assets/ folder, MAKE SURE THAT FOLDER DOES NOT HAVE ASSETS,
+         OR THEY MAY BE INCLUDED IN THE MAIN SOURCE PACKAGE!
+
+Build the source package:
+
+    1. source [repo-root]/debian_template.sh
+       * Initializes defaults for the package variables and fills in templates.
+    2. debuild -S (builds the source package for Launchpad)
+
+
+Signing for Launchpad PPA
+
+First, follow Callum's instructions to generate a GnuPG key with your identity. You will need
+to publish the fingerprint of that key to Ubuntu's key server.
+
+    https://help.ubuntu.com/community/GnuPrivacyGuardHowto#Uploading_the_key_to_Ubuntu_keyserver
+
+Next, you will have to add that key fingerprint to your Launchpad account. Go to your Launchpad
+profile and click the yellow Edit button next to "OpenPGP keys". Once you add the key, you can
+upload signed source packages and publish them onto your PPA.
+
+IF YOU UPLOAD A PACKAGE and Launchpad does NOT send you a confirmation or rejection email, that
+means your key is not set up correctly with your Launchpad account.
+
+Finally, if your packages have not already been signed, follow these steps:
+
+    1. cd ..
+       * Packages are located in the parent folder of where debuild was called
+    2. debsign "srb2_[version]_source.changes"
+       * You may need to specify -k [key-fingerprint]
+
+
+Uploading for Launchpad PPA
+
+Follow the instructions at <https://help.launchpad.net/Packaging/PPA/Uploading> to upload
+to your PPA and have Launchpad build your binary deb packages.
+
+
+ -- Marco Zafra <marco.a.zafra@gmail.com>  Mon, 26 Nov 2018 21:13:00 -0500

debian-template/README.source

@@ -0,0 +1,46 @@
+srb2 for Debian
+---------------
+
+Here it is! SRB2 v2.1.2 source code!
+
+GNU/Linux
+~~~
+
+Dependencies:
+  SDL 1.2.7 or better (from libsdl.org)
+  SDL_Mixer 1.2.2(.7 for file-less music playback) (from libsdl.org)
+  Nasm (use NOASM=1 if you don't have it or have an non-i386 system, I think)
+  libPNG 1.2.7
+  Zlib 1.2.3
+  The Xiph.org libogg and libvorbis libraries
+  The OpenGL headers (from Mesa, usually shipped with your X.org or XFree
+    installation, so you needn't worry, most likely)
+  GCC 3.x toolchain and binutils
+  GNU Make
+
+Build instructions:
+
+make -C src LINUX=1
+
+Build instructions for non-X86 devices (such as X64):
+
+make -C src LINUX=1 NONX86=1
+
+Build instructions to build for Wii Linux/SRB2Wii on a PowerPC system,
+follow cross-compiling instructions for cross-compiling on a x86 system:
+
+make -C src LINUX=1 WIILINUX=1
+
+Build instructions to build for Pandora (Linux) on a ARM system,
+follow cross-compiling instructions for cross-compiling on a x86 system:
+
+make -C src PANDORA=1
+
+-------------------------------------------------------------------------------
+
+binaries will turn in up in bin/
+
+note: read the src/makefile for more options
+
+- Sonic Team Junior
+http://www.srb2.org

debian-template/changelog

@@ -0,0 +1,5 @@
+${PACKAGE_NAME} (${PACKAGE_VERSION}${PACKAGE_SUBVERSION}${PACKAGE_REVISION}) ${PACKAGE_DISTRO}; urgency=${PACKAGE_URGENCY}
+
+  * ${PROGRAM_NAME} v${PROGRAM_VERSION} program build
+
+ -- ${PACKAGE_NAME_EMAIL}  ${__PACKAGE_DATETIME}

debian-template/compat

@@ -0,0 +1 @@
+7

debian-template/control

@@ -0,0 +1,51 @@
+# SRB2 Debian package control file.
+
+Source: ${PACKAGE_NAME}
+Section: games
+Priority: extra
+Maintainer: ${PACKAGE_GROUP_NAME_EMAIL}
+Build-Depends: debhelper (>= 7.0.50~),
+ libsdl2-dev,
+ libsdl2-mixer-dev,
+ libpng-dev | libpng16-dev | libpng12-dev (>= 1.2.7),
+ zlib1g-dev,
+ libgme-dev,
+ libcurl4-openssl-dev,
+ libglu1-dev | libglu-dev,
+ libosmesa6-dev | libgl-dev,
+ nasm [i386]
+Standards-Version: 3.8.4
+Homepage: ${PACKAGE_WEBSITE}
+
+Package: ${PACKAGE_NAME}
+Architecture: any
+Depends: ${SHLIBS_DEPENDS}, ${MISC_DEPENDS},
+ ${PACKAGE_NAME}-data (>> ${PACKAGE_ASSET_MINVERSION}), ${PACKAGE_NAME}-data (<< ${PACKAGE_ASSET_MAXVERSION}),
+ libsdl2-2.0-0,
+ libsdl2-mixer-2.0-0,
+ zlib1g,
+ libgme0,
+ libcurl4,
+ libpng | libpng16-16 | libpng12-0
+Description: A cross-platform 3D Sonic fangame
+ Sonic Robo Blast 2 is a 3D open-source Sonic the Hedgehog
+ fangame built using a modified version of the Doom Legacy
+ port of Doom. SRB2 is closely inspired by the original
+ Sonic games from the Sega Genesis, and attempts to recreate
+ the design in 3D. It features tons of levels, enemies, speed,
+ and quite a lot of the fun that the original Sonic games provided.
+
+
+Package: ${PACKAGE_NAME}-dbg
+Architecture: any
+# FIXME: should be Depends: ${SHLIBS_DEPENDS}, ${MISC_DEPENDS}, srb2-data (= 2.1.14), srb2 but dh_shlibdeps is being an asshat
+Depends: libc6, ${MISC_DEPENDS}, ${PACKAGE_NAME}-data (>> ${PACKAGE_ASSET_MINVERSION}), ${PACKAGE_NAME}-data (<< ${PACKAGE_ASSET_MAXVERSION}), ${PACKAGE_NAME}
+Description: A cross-platform 3D Sonic fangame
+ Sonic Robo Blast 2 is a 3D open-source Sonic the Hedgehog
+ fangame built using a modified version of the Doom Legacy
+ port of Doom. SRB2 is closely inspired by the original
+ Sonic games from the Sega Genesis, and attempts to recreate
+ the design in 3D. It features tons of levels, enemies, speed,
+ and quite a lot of the fun that the original Sonic games provided.
+ This is a debug binary; its symbols will be loaded by gdb
+ when the user starts the game with gdb for debugging.

debian-template/copyright

@@ -0,0 +1,27 @@
+This work was packaged for Debian by:
+
+    ${PACKAGE_NAME_EMAIL}  ${__PACKAGE_DATETIME}
+
+It was downloaded from:
+
+    ${PACKAGE_WEBSITE}
+
+Upstream Author(s):
+
+    ${PACKAGE_GROUP_NAME_EMAIL}
+
+Copyright:
+
+    Copyright (C) 1998-2018 by Sonic Team Junior
+
+License:
+
+    GNU General Public License, version 2
+
+The Debian packaging is:
+
+    Copyright (C) 2010 Callum Dickinson <gcfreak_ag20@hotmail.com>
+    Copyright (C) 2010-2018 by Sonic Team Junior <stjr@srb2.org>
+
+and is licensed under the GPL version 2,
+see "/usr/share/common-licenses/GPL-2".

debian-template/docs

@@ -0,0 +1,4 @@
+README.md
+assets/README.txt
+assets/LICENSE.txt
+assets/LICENSE-3RD-PARTY.txt

debian-template/rules

@@ -0,0 +1,172 @@
+#!/usr/bin/make -f
+# -*- makefile -*-
+
+#############################################################################
+#
+#     GNU Make Debian package makefile for SRB2
+#
+# Copyright (C) 1998-2010 by Callum Dickinson
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License
+# as published by the Free Software Foundation; either version 2
+# of the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	See the
+# GNU General Public License for more details.
+#
+# This file most likely will not need to be modified to make
+# branches of SRB2 capable of making their own Debian packages,
+# instead look at the /debian/control file for configuration.
+#
+#############################################################################
+
+#############################################################################
+#
+# !!!!!!!!!! DEPLOYER NOTE !!!!!!!!!!
+#
+# Variables to be templated are curly-braced ${PACKAGE_INSTALL_PATH}
+# Variables used by the rules script are parenthese'd $(PKGDIR)
+# See [repo-root]/debian_template.sh
+#
+#############################################################################
+
+# Uncomment this to turn on verbose mode.
+#export DH_VERBOSE=1
+
+# user/group of to-be-installed files
+ROOT_USER  := 0
+ROOT_GROUP := 0
+
+# determine cross-compile (may need some work)
+CROSS_COMPILE_BUILD    := $(shell dpkg-architecture -qDEB_BUILD_GNU_TYPE)
+CROSS_COMPILE_HOST     := $(shell dpkg-architecture -qDEB_HOST_GNU_TYPE)
+CROSS_COMPILE 	       := $(shell test "$(CROSS_COMPILE_BUILD)" != "$(CROSS_COMPILE_HOST)" && echo "$(CROSS_COMPILE_HOST)")
+
+MKDIR = mkdir -p
+MAKE = make
+INSTALL = install -o $(ROOT_USER) -g $(ROOT_GROUP) -m 644
+MV	= mv
+RM	= rm -rf
+STRIPARGS = --strip-unneeded
+ifdef CROSS_COMPILE
+STRIP = $(CROSS_COMPILE_HOST)-strip $(STRIPARGS)
+else
+STRIP = strip $(STRIPARGS)
+endif
+DIR	:= $(shell pwd)
+
+# FIXME: hate hate hate head/tail hack :(
+CONTROLF = $(DIR)/debian/control
+PACKAGE  = ${PACKAGE_NAME}
+DBGPKG   = ${PACKAGE}-dbg
+TITLE	= ${PROGRAM_NAME}
+SECTION = Games/Action
+EXENAME = ${PROGRAM_FILENAME}
+DBGNAME	= debug/$(EXENAME)
+
+PKGDIR	= $(shell echo "${PACKAGE_INSTALL_PATH}" | sed -e 's/^\///')
+DBGDIR	= usr/lib/debug/$(PKGDIR)
+LINKDIR = $(shell echo "${PACKAGE_LINK_PATH}" | sed -e 's/^\///')
+PIXMAPS_DIR = usr/share/pixmaps
+DESKTOP_DIR = usr/share/applications
+PREFIX	= $(shell test "$(CROSS_COMPILE_BUILD)" != "$(CROSS_COMPILE_HOST)" && echo "PREFIX=$(CROSS_COMPILE_HOST)")
+OS	= LINUX=1
+NONX86	= $(shell test "`echo $(CROSS_COMPILE_HOST) | grep 'i[3-6]86'`" || echo "NONX86=1")
+MAKEARGS = $(OS) $(NONX86) $(PREFIX) EXENAME=$(EXENAME) DBGNAME=$(DBGNAME) NOOBJDUMP=1 # SDL_PKGCONFIG=sdl2 PNG_PKGCONFIG=libpng
+MENUFILE1 = ?package($(PACKAGE)):needs="X11" section="$(SECTION)"
+MENUFILE2 = title="$(TITLE)" command="/$(PKGDIR)/$(PACKAGE)"
+BINDIR :=  $(DIR)/bin/Linux/Release
+
+# FIXME pkg-config dir hacks
+# Launchpad doesn't need this; it actually makes i386 builds fail due to cross-compile
+# export PKG_CONFIG_LIBDIR = /usr/lib/$(CROSS_COMPILE_HOST)/pkgconfig
+LDFLAGS += "-Wl,-rpath=/usr/lib/$(CROSS_COMPILE_HOST)"
+
+# Some libgme-dev packages don't use pkg-config yet, so include the linker flag ourselves
+PKG_CONFIG?=pkg-config
+LIBGME_PKGCONFIG?=libgme
+LIBGME_LDFLAGS?=$(shell $(PKG_CONFIG) $(LIBGME_PKGCONFIG) --libs)
+
+ifeq ($(LIBGME_LDFLAGS),)
+MAKEARGS += LIBGME_LDFLAGS=-lgme
+endif
+
+build:
+	$(MKDIR) $(BINDIR)/debug
+	$(MAKE) -C $(DIR)/src $(MAKEARGS)
+	$(STRIP) $(BINDIR)/$(EXENAME)
+
+binary-indep:
+	# only here to kill Lintian warning
+	echo "no need to do any arch-independent stuff"
+
+binary-arch:
+	# create ddirs
+	$(MKDIR) $(DIR)/debian/tmp/$(PKGDIR) $(DIR)/debian/tmp/$(DBGDIR)
+	$(MKDIR) $(DIR)/debian/tmp/$(PKGDIR) $(DIR)/debian/tmp/$(DESKTOP_DIR)
+	$(MKDIR) $(DIR)/debian/tmp/$(PKGDIR) $(DIR)/debian/tmp/$(PIXMAPS_DIR)
+	# install main binaries
+	$(INSTALL) $(BINDIR)/$(EXENAME) $(DIR)/debian/tmp/$(PKGDIR)/$(PACKAGE)
+	$(INSTALL) $(BINDIR)/$(DBGNAME) $(DIR)/debian/tmp/$(DBGDIR)/$(PACKAGE)
+	# Install desktop file and banner image
+	$(INSTALL) $(DIR)/srb2.png $(DIR)/debian/tmp/usr/share/pixmaps/${PROGRAM_FILENAME}.png
+	$(INSTALL) $(DIR)/debian/srb2.desktop $(DIR)/debian/tmp/usr/share/applications/${PROGRAM_FILENAME}.desktop
+	# add compiled binaries to include-binaries
+	echo $(BINDIR)/$(EXENAME) >> $(DIR)/debian/source/include-binaries
+	echo $(BINDIR)/$(EXENAME) >> $(DIR)/debian/source/include-binaries
+	# Generate install folder files
+	echo $(PKGDIR) > $(DIR)/debian/$(PACKAGE).install
+	echo $(DESKTOP_DIR) >> $(DIR)/debian/$(PACKAGE).install
+	echo $(PIXMAPS_DIR) >> $(DIR)/debian/$(PACKAGE).install
+	echo $(DBGDIR) > $(DIR)/debian/$(DBGPKG).install
+# Launchpad only calls binary-arch, so just move everything up
+#binary: binary-arch
+	# Generate .desktop specifications
+	echo "`echo '$(MENUFILE1)\\'`" > $(DIR)/debian/menu
+	echo " `echo '$(MENUFILE2)'`" >> $(DIR)/debian/menu
+	dh_testdir
+	dh_testroot
+	dh_installchangelogs
+	dh_installdocs
+	# dh_installexamples
+	dh_install --sourcedir=$(DIR)/debian/tmp
+	dh_installmenu
+	# dh_installdebconf
+	# dh_installlogrotate
+	# dh_installemacsen
+	# dh_installpam
+	# dh_installmime
+	# dh_python
+	# dh_installinit
+	# dh_installcron
+	# dh_installinfo
+	# dh_installman
+	dh_link $(PKGDIR)/$(EXENAME) $(LINKDIR)/$(EXENAME)
+	dh_compress
+	dh_fixperms
+	# dh_perl
+	# dh_makeshlibs
+	dh_installdeb
+	-dh_shlibdeps
+	dh_gencontrol
+	dh_md5sums
+	dh_builddeb
+
+binary: binary-arch
+
+clean:
+	$(MAKE) -C $(DIR)/src $(MAKEARGS) clean cleandep
+	$(RM) $(BINDIR)/*
+	$(RM) $(DIR)/debian/$(PACKAGE)/*
+	$(RM) $(DIR)/debian/$(DBGPKG)/*
+	$(RM) $(DIR)/debian/tmp/*
+	$(RM) $(DIR)/debian/$(PACKAGE).install
+	$(RM) $(DIR)/debian/$(DBGPKG).install
+	$(RM) $(DIR)/debian/menu
+	$(RM) $(DIR)/debian/files
+	$(RM) $(DIR)/debian/source/include-binaries
+
+.PHONY: all clean binary binary-indep build

debian-template/source/format

@@ -0,0 +1 @@
+3.0 (native)

debian-template/source/options

@@ -0,0 +1,11 @@
+tar-ignore = "assets/*.srb"
+tar-ignore = "assets/*.pk3"
+tar-ignore = "assets/*.dta"
+tar-ignore = "assets/*.wad"
+tar-ignore = "assets/*.kart"
+tar-ignore = "assets/debian/${PACKAGE_NAME}-data/*"
+tar-ignore = "assets/debian/tmp/*"
+tar-ignore = "*.obj"
+tar-ignore = "*.dep"
+tar-ignore = ".git/*"
+tar-ignore = ".git*"

debian-template/srb2.desktop

@@ -0,0 +1,10 @@
+[Desktop Entry]
+Name=${PROGRAM_NAME}
+Comment=${PROGRAM_DESCRIPTION}
+Encoding=UTF-8
+Exec=${PACKAGE_INSTALL_PATH}/${PROGRAM_FILENAME}
+Icon=/usr/share/pixmaps/${PROGRAM_FILENAME}.png
+Terminal=false
+Type=Application
+StartupNotify=false
+Categories=Application;Game;

debian_template.sh

@@ -0,0 +1,166 @@
+#!/bin/bash
+
+# Deployer for Travis-CI
+# Debian package templating
+#
+# Call this script BEFORE running debuild!
+# source ./debian_template.sh [clean] [main/asset]
+#
+# Before running this script,
+# you should also set PACKAGE_NAME_EMAIL="John Doe <jdoe@example.com>" to match
+# the identity of the key you will use to sign the package.
+#
+
+# Get script's actual path
+DIR="$( cd "$( dirname "${BASH_SOURCE[0]}" )" >/dev/null && pwd )"
+
+# Recursive function for directory crawling
+# $1 = Directory root to crawl
+# $2 = Code to eval on file
+# $3 = Code to eval on directory
+# Exposes $dirtails, $dirlevel, and $dirtailname
+dirlevel=0 # initialize
+dirtails=()
+
+# Utility function to make dira/dirb/dirc string
+makedirtailname () {
+	dirtailname=""
+	for tail in $dirtails; do
+		if [[ "$dirtailname" == "" ]]; then
+			dirtailname="/$tail";
+		else
+			dirtailname="$dirtailname/$tail";
+		fi;
+	done;
+}
+
+evaldirectory () {
+	if [ -d "$1" ]; then
+		# Set contextual variables
+		# dirtails is an array of directory basenames after the crawl root
+		if (( $dirlevel > 0 )); then
+			dirtails+=( "$(basename $1)" );
+		else
+			dirtails=();
+		fi;
+		dirlevel=$((dirlevel+1));
+
+		# Generate directory path after the crawl root
+		makedirtailname;
+
+		# Eval our directory with the latest contextual info
+		# Don't eval on root
+		if (( $dirlevel > 1 )) && [[ "$3" != "" ]]; then
+			eval "$3";
+		fi;
+
+		# Iterate entries
+		for name in $1/*; do
+			if [ -d "$name" ]; then
+				# Name is a directory, but don't eval yet
+				# Recurse so our vars are updated
+				evaldirectory "$name" "$2" "$3";
+
+				# Decrement our directory level and remove a dirtail
+				unset 'dirtails[ ${#dirtails[@]}-1 ]';
+				dirlevel=$((dirlevel-1));
+				makedirtailname;
+			else
+				# Name is a file
+				if [ -f "$name" ] && [[ "$2" != "" ]]; then
+					eval "$2";
+				fi;
+			fi;
+		done;
+
+		# Reset our variables; we're done iterating
+		if (( $dirlevel == 1 )); then
+			dirlevel=0;
+		fi;
+	fi;
+}
+
+#
+# Initialize package parameter defaults
+#
+if [[ "$__DEBIAN_PARAMETERS_INITIALIZED" != "1" ]]; then
+	. ${DIR}/deployer/travis/deployer_defaults.sh;
+fi;
+
+# Clean up after ourselves; we only expect to run this script once
+# during buildboting
+__DEBIAN_PARAMETERS_INITIALIZED=0
+
+# for envsubst
+export __PACKAGE_DATETIME="$(date '+%a, %d %b %Y %H:%M:%S %z')"
+export __PACKAGE_DATETIME_DIGIT="$(date -u '+%Y%m%d%H%M%S')"
+
+if [[ "$PACKAGE_REVISION" == "" ]]; then
+	PACKAGE_REVISION="-$__PACKAGE_DATETIME_DIGIT";
+	__PACKAGE_REVISION_BY_DATE=1;
+	export PACKAGE_REVISION=${PACKAGE_REVISION}; # for envsubst
+fi;
+
+#
+# Clean the old debian/ directories
+#
+if [[ "$1" == "clean" ]]; then
+	toclean=$2;
+else
+	toclean=$1;
+fi;
+
+if [[ "$toclean" == "" ]] || [[ "$toclean" == "main" ]]; then
+	echo "Cleaning main package scripts";
+	if [[ ! -f ${DIR}/debian ]]; then
+		rm -rf ${DIR}/debian;
+	fi;
+fi;
+if [[ "$toclean" == "" ]] || [[ "$toclean" == "asset" ]]; then
+	echo "Cleaning asset package scripts";
+	if [[ ! -f ${DIR}/assets/debian ]]; then
+		rm -rf ${DIR}/assets/debian;
+	fi;
+fi;
+
+#
+# Make new templates
+#
+if [[ "$1" != "clean" ]]; then
+	totemplate=$1;
+
+	# HACK: ${shlibs:Depends} in the templates make the templating fail
+	# So just define replacemment variables
+	export SHLIBS_DEPENDS=${SHLIBS_DEPENDS};
+	export MISC_DEPENDS=${MISC_DEPENDS};
+	export DEBFILEVAR='$$file'; # used in assets/debian/rules
+
+	# Package parameters are exported for envsubst in deployer_defaults.sh
+
+	if [[ "$totemplate" == "" ]] || [[ "$totemplate" == "main" ]]; then
+		echo "Generating main package scripts";
+		fromroot=${DIR}/debian-template;
+		toroot=${DIR}/debian;
+		mkdir ${toroot};
+
+		evaldirectory ${fromroot} \
+			"cat \$name | envsubst > ${toroot}\${dirtailname}/\$( basename \$name )" \
+			"mkdir \"${toroot}\${dirtailname}\"";
+	fi;
+
+	if [[ "$totemplate" == "" ]] || [[ "$totemplate" == "asset" ]]; then
+		echo "Generating asset package scripts";
+		fromroot=${DIR}/assets/debian-template;
+		toroot=${DIR}/assets/debian;
+		mkdir ${toroot};
+
+		# Root dir to crawl; file eval; directory eval
+		evaldirectory ${fromroot} \
+			"cat \$name | envsubst > ${toroot}\${dirtailname}/\$( basename \$name )" \
+			"mkdir \"${toroot}\${dirtailname}\"";
+	fi;
+fi;
+
+if [[ "$__DPL_ACTIVE" != "1" ]] && [[ "$__PACKAGE_REVISION_BY_DATE" == "1" ]]; then
+	unset PACKAGE_REVISION; # so we can reset the date on subsequent runs
+fi;

deployer/appveyor/deployer.bat

@@ -0,0 +1,195 @@
+@setlocal enableextensions enabledelayedexpansion
+
+::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::
+: Appveyor Deployer
+: See appveyor.yml for default variables
+::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::
+
+::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::
+: Evaluate whether we should be deploying
+::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::
+
+if not [%DPL_ENABLED%] == [1] (
+    echo Deployer is not enabled...
+    exit /b
+)
+
+: Don't do DD installs because fmodex DLL handling is not implemented.
+if [%CONFIGURATION%] == [DD] (
+    echo Deployer does not support DD builds...
+    exit /b
+)
+
+if [%CONFIGURATION%] == [DD64] (
+    echo Deployer does not support DD builds...
+    exit /b
+)
+
+: Substring match from https://stackoverflow.com/questions/7005951/batch-file-find-if-substring-is-in-string-not-in-a-file
+: The below line says "if deployer is NOT in string"
+: Note that APPVEYOR_REPO_BRANCH for pull request builds is the BASE branch that PR is merging INTO
+if x%APPVEYOR_REPO_BRANCH:deployer=%==x%APPVEYOR_REPO_BRANCH% (
+    if not [%APPVEYOR_REPO_TAG%] == [true] (
+        echo Deployer is enabled but we are not in a release tag or a 'deployer' branch...
+        exit /b
+    ) else (
+        if not [%DPL_TAG_ENABLED%] == [1] (
+            echo Deployer is not enabled for release tags...
+            exit /b
+        )
+    )
+)
+
+: Release tags always get optional assets (music.dta)
+if [%APPVEYOR_REPO_TAG%] == [true] (
+    set "ASSET_FILES_OPTIONAL_GET=1"
+)
+
+::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::
+: Get asset archives
+::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::
+
+if exist "C:\Users\appveyor\srb2_cache\archives\" (
+    if [%ASSET_CLEAN%] == [1] (
+        echo Cleaning asset archives...
+        rmdir /s /q "C:\Users\appveyor\srb2_cache\archives"
+    )
+)
+
+if not exist "C:\Users\appveyor\srb2_cache\archives\" mkdir "C:\Users\appveyor\srb2_cache\archives"
+
+goto EXTRACT_ARCHIVES
+
+::::::::::::::::::::::::::::::::
+: ARCHIVE_NAME_PARTS
+: Call this like a function. %archivepath% is the path to extract parts from.
+::::::::::::::::::::::::::::::::
+
+for %%a in (%archivepath%) do (
+    set "file=%%~fa"
+    set "filepath=%%~dpa"
+    set "filename=%%~nxa"
+)
+
+set "localarchivepath=C:\Users\appveyor\srb2_cache\archives\%filename%"
+
+goto EOF
+
+::::::::::::::::::::::::::::::::
+: EXTRACT_ARCHIVES
+::::::::::::::::::::::::::::::::
+
+set "archivepath=%ASSET_ARCHIVE_PATH%"
+call :ARCHIVE_NAME_PARTS
+set "ASSET_ARCHIVE_PATH_LOCAL=%localarchivepath%"
+if not exist "%localarchivepath%" appveyor DownloadFile "%ASSET_ARCHIVE_PATH%" -FileName "%localarchivepath%"
+
+set "archivepath=%ASSET_ARCHIVE_PATCH_PATH%"
+call :ARCHIVE_NAME_PARTS
+set "ASSET_ARCHIVE_PATCH_PATH_LOCAL=%localarchivepath%"
+if not exist "%localarchivepath%" appveyor DownloadFile "%ASSET_ARCHIVE_PATCH_PATH%" -FileName "%localarchivepath%"
+
+if not [%X86_64%] == [1] (
+    set "archivepath=%ASSET_ARCHIVE_X86_PATH%"
+    call :ARCHIVE_NAME_PARTS
+    set "ASSET_ARCHIVE_X86_PATH_LOCAL=!localarchivepath!"
+    if not exist "!localarchivepath!" appveyor DownloadFile "%ASSET_ARCHIVE_X86_PATH%" -FileName "!localarchivepath!"
+)
+
+if [%X86_64%] == [1] (
+    set "archivepath=%ASSET_ARCHIVE_X64_PATH%"
+    call :ARCHIVE_NAME_PARTS
+    set "ASSET_ARCHIVE_X64_PATH_LOCAL=!localarchivepath!"
+    if not exist "!localarchivepath!" appveyor DownloadFile "%ASSET_ARCHIVE_X64_PATH%" -FileName "!localarchivepath!"
+)
+
+if [%ASSET_FILES_OPTIONAL_GET%] == [1] (
+    set "archivepath=%ASSET_ARCHIVE_OPTIONAL_PATH%"
+    call :ARCHIVE_NAME_PARTS
+    set "ASSET_ARCHIVE_OPTIONAL_PATH_LOCAL=!localarchivepath!"
+    if not exist "!localarchivepath!" appveyor DownloadFile "%ASSET_ARCHIVE_OPTIONAL_PATH%" -FileName "!localarchivepath!"
+)
+
+::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::
+: Build the installers
+::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::
+
+mkdir "assets\installer"
+mkdir "assets\patch"
+
+7z x -y "%ASSET_ARCHIVE_PATH_LOCAL%" -o"assets\installer" >null
+7z x -y "%ASSET_ARCHIVE_PATCH_PATH_LOCAL%" -o"assets\patch" >null
+
+: Copy optional files to full installer (music.dta)
+if [%ASSET_FILES_OPTIONAL_GET%] == [1] (
+    7z x -y "%ASSET_ARCHIVE_OPTIONAL_PATH_LOCAL%" -o"assets\installer" >null
+)
+
+: Copy EXE -- BUILD_PATH is from appveyor.yml
+robocopy /S /ns /nc /nfl /ndl /np /njh /njs "%BUILD_PATH%" "assets\installer" /XF "*.debug" ".gitignore"
+robocopy /S /ns /nc /nfl /ndl /np /njh /njs "%BUILD_PATH%" "assets\patch" /XF "*.debug" ".gitignore"
+
+: Are we building DD? (we were supposed to exit earlier!)
+if [%CONFIGURATION%] == [DD] ( set "DPL_INSTALLER_NAME=%DPL_INSTALLER_NAME%-DD" )
+if [%CONFIGURATION%] == [DD64] ( set "DPL_INSTALLER_NAME=%DPL_INSTALLER_NAME%-DD" )
+
+: If we are not a release tag, suffix the filename
+if not [%APPVEYOR_REPO_TAG%] == [true] (
+    set "INSTALLER_SUFFIX=-%APPVEYOR_REPO_BRANCH%-%GITSHORT%-%CONFIGURATION%"
+) else (
+    set "INSTALLER_SUFFIX="
+)
+
+if not [%X86_64%] == [1] ( goto X86_INSTALL )
+
+::::::::::::::::::::::::::::::::
+: X64_INSTALL
+::::::::::::::::::::::::::::::::
+
+: Extract DLL binaries
+7z x -y "%ASSET_ARCHIVE_X64_PATH_LOCAL%" -o"assets\installer" >null
+if [%PACKAGE_PATCH_DLL_GET%] == [1] (
+    7z x -y "!ASSET_ARCHIVE_X64_PATH_LOCAL!" -o"assets\patch" >null
+)
+
+: Build the installer
+7z a -sfx7z.sfx "%DPL_INSTALLER_NAME%-x64-Installer%INSTALLER_SUFFIX%.exe" .\assets\installer\*
+
+: Build the patch
+7z a "%DPL_INSTALLER_NAME%-x64-Patch%INSTALLER_SUFFIX%.zip" .\assets\patch\*
+
+: Upload artifacts
+appveyor PushArtifact "%DPL_INSTALLER_NAME%-x64-Installer%INSTALLER_SUFFIX%.exe"
+appveyor PushArtifact "%DPL_INSTALLER_NAME%-x64-Patch%INSTALLER_SUFFIX%.zip"
+
+: We only do x86 OR x64, one at a time, so exit now.
+goto EOF
+
+::::::::::::::::::::::::::::::::
+: X86_INSTALL
+::::::::::::::::::::::::::::::::
+
+: Extract DLL binaries
+7z x -y "%ASSET_ARCHIVE_X86_PATH_LOCAL%" -o"assets\installer" >null
+if [%PACKAGE_PATCH_DLL_GET%] == [1] (
+    7z x -y "!ASSET_ARCHIVE_X86_PATH_LOCAL!" -o"assets\patch" >null
+)
+
+: Build the installer
+7z a -sfx7z.sfx "%DPL_INSTALLER_NAME%-Installer%INSTALLER_SUFFIX%.exe" .\assets\installer\*
+
+: Build the patch
+7z a "%DPL_INSTALLER_NAME%-Patch%INSTALLER_SUFFIX%.zip" .\assets\patch\*
+
+: Upload artifacts
+appveyor PushArtifact "%DPL_INSTALLER_NAME%-Installer%INSTALLER_SUFFIX%.exe"
+appveyor PushArtifact "%DPL_INSTALLER_NAME%-Patch%INSTALLER_SUFFIX%.zip"
+
+: We only do x86 OR x64, one at a time, so exit now
+goto EOF
+
+::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::
+: EOF
+::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::
+
+endlocal

deployer/travis/deployer.sh

@@ -0,0 +1,157 @@
+#!/bin/bash
+
+# Deployer for Travis-CI
+# Initialization
+#
+# Performs validity checks to ensure that Deployer is allowed to run
+# e.g., is an FTP hostname specified? Are we whitelisted by OSNAMES and BRANCHES?
+#
+# Set these environment variables in your Travis-CI settings, where they are stored securely.
+# See other shell scripts for more options.
+#
+# DPL_ENABLED = 1                       (leave blank to disable)
+# DPL_TAG_ENABLED = 1                   (run Deployer on all tags)
+# DPL_JOB_ENABLE_ALL = 1                (run Deployer on all jobs; leave blank to act on specific jobs, see below)
+# DPL_JOBNAMES = name1,name2            (whitelist of job names to allow uploading; leave blank to upload from all jobs)
+# DPL_OSNAMES = osx                     (whitelist of OS names to allow uploading; leave blank to upload from all OSes)
+# DPL_BRANCHES = master,branch1,branch2 (whitelist of branches to upload; leave blank to upload all branches)
+#
+# To enable Deployer on specific jobs, set _DPL_JOB_ENABLED=1 for that job. Example:
+# - matrix:
+#   - os: osx
+#     env:
+#     - _DPL_JOB_ENABLED=1
+#
+# DO NOT set __DPL_ACTIVE, because that would bypass these validity checks.
+
+# Validate Deployer state
+if [[ "$DPL_ENABLED" == "1" ]] && [[ "$TRAVIS_PULL_REQUEST" == "false" ]]; then
+    # Test for base eligibility:
+    # Are we in a deployer branch? Or
+    # Are we in a release tag AND DPL_TAG_ENABLED=1?
+    if [[ $TRAVIS_BRANCH == *"deployer"* ]]; then
+        __DPL_BASE_ELIGIBLE=1;
+        __DPL_TERMINATE_EARLY_ELIGIBLE=1;
+    fi;
+
+    if [[ "$TRAVIS_TAG" != "" ]] && [[ "$DPL_TAG_ENABLED" == "1" ]]; then
+        __DPL_BASE_ELIGIBLE=1;
+        __DPL_TAG_ELIGIBLE=1;
+        __DPL_TERMINATE_EARLY_ELIGIBLE=1;
+    fi;
+
+    # Logging message for trigger word
+    if [[ "$__DPL_TAG_ELIGIBLE" != "1" ]] && [[ "$DPL_TRIGGER" != "" ]]; then
+        echo "Testing for trigger $DPL_TRIGGER, commit message: $TRAVIS_COMMIT_MESSAGE";
+        echo "[${DPL_TRIGGER}]";
+        echo "[${DPL_TRIGGER}-${_DPL_JOB_NAME}]";
+        echo "[${DPL_TRIGGER}-${TRAVIS_OS_NAME}]";
+    fi;
+
+    #
+    # Search for the trigger word
+    # Force enable if release tags are eligible
+    #
+    if [[ "$__DPL_TAG_ELIGIBLE" == "1" ]] || [[ "$DPL_TRIGGER" == "" ]] \
+    || [[ $TRAVIS_COMMIT_MESSAGE == *"[$DPL_TRIGGER]"* ]] \
+    || [[ $TRAVIS_COMMIT_MESSAGE == *"[${DPL_TRIGGER}-${_DPL_JOB_NAME}]"* ]] \
+    || [[ $TRAVIS_COMMIT_MESSAGE == *"[${DPL_TRIGGER}-${TRAVIS_OS_NAME}]"* ]]; then
+        #
+        # Whitelist by branch name
+        # Force enable if release tags are eligible
+        #
+        if [[ "$__DPL_TAG_ELIGIBLE" == "1" ]] || [[ "$DPL_BRANCHES" == "" ]] || [[ $DPL_BRANCHES == *"$TRAVIS_BRANCH"* ]]; then
+            # Set this so we only early-terminate builds when we are specifically deploying
+            # Trigger string and branch are encompassing conditions; the rest are job-specific
+            # This check only matters for deployer branches and when DPL_TERMINATE_TESTS=1,
+            # because we're filtering non-deployer jobs.
+            #
+            # __DPL_TRY_TERMINATE_EARLY is invalidated in .travis.yml if __DPL_ACTIVE=1
+            if [[ "$__DPL_TERMINATE_EARLY_ELIGIBLE" == "1" ]] && [[ "$DPL_TERMINATE_TESTS" == "1" ]]; then
+                __DPL_TRY_TERMINATE_EARLY=1;
+            fi;
+
+            #
+            # Is the job enabled for deployment?
+            #
+            if [[ "$DPL_JOB_ENABLE_ALL" == "1" ]] || [[ "$_DPL_JOB_ENABLED" == "1" ]]; then
+                #
+                # Whitelist by job names
+                #
+                if [[ "$DPL_JOBNAMES" == "" ]] || [[ "$_DPL_JOB_NAME" == "" ]] || [[ $DPL_JOBNAMES == *"$_DPL_JOB_NAME"* ]]; then
+                    #
+                    # Whitelist by OS names
+                    #
+                    if [[ "$DPL_OSNAMES" == "" ]] || [[ $DPL_OSNAMES == *"$TRAVIS_OS_NAME"* ]]; then
+                        # Base Deployer is eligible for becoming active
+
+                        # Are we building for Linux?
+                        if [[ "$_DPL_PACKAGE_BINARY" == "1" ]] || [[ "$_DPL_PACKAGE_SOURCE" == "1" ]]; then
+                            if [[ "$_DPL_PACKAGE_MAIN" == "1" ]] || [[ "$_DPL_PACKAGE_ASSET" == "1" ]]; then
+                                if [[ "$TRAVIS_OS_NAME" == "linux" ]]; then
+                                    __DPL_DEBIAN_ACTIVE=1;
+                                fi;
+                            fi;
+                        fi;
+
+                        # Now check for deployment targets
+                        if [[ "$_DPL_FTP_TARGET" == "1" ]] && [[ "$DPL_FTP_HOSTNAME" != "" ]]; then
+                            if [[ "$TRAVIS_OS_HOST" == "linux" ]] && [[ "$DPL_FTP_PROTOCOL" == "ftp" ]]; then
+                                echo "Non-secure FTP will not work on Linux Travis-CI jobs!";
+                                echo "Try SFTP or another target. Details:";
+                                echo "https://blog.travis-ci.com/2018-07-23-the-tale-of-ftp-at-travis-ci";
+                            else
+                                if [[ "$__DPL_DEBIAN_ACTIVE" == "1" ]] || [[ "$_DPL_PACKAGE_BINARY" == "1" ]] || [[ "$_DPL_BINARY" == "1" ]]; then
+                                    echo "Deployer FTP target is enabled";
+                                    __DPL_FTP_ACTIVE=1;
+                                else
+                                    echo "Deployer FTP target cannot be enabled: You must specify _DPL_PACKAGE_BINARY=1,";
+                                    echo "and/or _DPL_BINARY=1 in your job's environment variables.";
+                                fi;
+                            fi;
+                        fi;
+
+                        if [[ "$_DPL_DPUT_TARGET" == "1" ]] && [[ "$__DPL_DEBIAN_ACTIVE" == "1" ]] \
+                        && [[ "$DPL_DPUT_INCOMING" != "" ]]; then
+                            if [[ "$DPL_DPUT_METHOD" == "ftp" ]]; then
+                                echo "DPUT will not work with non-secure FTP on Linux Travis-CI jobs!";
+                                echo "Try SFTP or another method for DPUT. Details:";
+                                echo "https://blog.travis-ci.com/2018-07-23-the-tale-of-ftp-at-travis-ci";
+                            else
+                                echo "Deployer DPUT target is enabled";
+                                __DPL_DPUT_ACTIVE=1;
+                            fi;
+                        fi;
+
+                        # If any deployment targets are active, then so is the Deployer at large
+                        if [[ "$__DPL_FTP_ACTIVE" == "1" ]] || [[ "$__DPL_DPUT_ACTIVE" == "1" ]]; then
+                            __DPL_ACTIVE=1;
+                        fi;
+                    fi;
+                fi;
+            fi;
+        fi;
+    else
+        if [[ "$DPL_TRIGGER" != "" ]]; then
+            echo "Testing for global trigger [$DPL_TRIGGER, commit message: $TRAVIS_COMMIT_MESSAGE";
+        fi;
+        if [[ "$DPL_TRIGGER" != "" ]] && [[ $TRAVIS_COMMIT_MESSAGE == *"[$DPL_TRIGGER"* ]]; then
+            if [[ "$__DPL_TAG_ELIGIBLE" == "1" ]] || [[ "$DPL_BRANCHES" == "" ]] || [[ $DPL_BRANCHES == *"$TRAVIS_BRANCH"* ]]; then
+                # This check only matters for deployer branches and when DPL_TERMINATE_TESTS=1,
+                # because we're filtering non-deployer jobs.
+                if [[ "$__DPL_TERMINATE_EARLY_ELIGIBLE" == "1" ]] && [[ "$DPL_TERMINATE_TESTS" == "1" ]]; then
+                    # Assume that some job received the trigger, so mark this for early termination
+                    __DPL_TRY_TERMINATE_EARLY=1;
+                fi;
+            fi;
+        fi;
+    fi;
+fi;
+
+if [[ "$__DPL_TRY_TERMINATE_EARLY" == "1" ]] && [[ "$__DPL_ACTIVE" != "1" ]]; then
+    echo "Deployer is active in another job";
+fi;
+
+if [[ "$__DPL_TRY_TERMINATE_EARLY" != "1" ]] && [[ "$__DPL_ACTIVE" != "1" ]]; then
+    echo "Deployer is not active";
+fi;

deployer/travis/deployer_build.sh

@@ -0,0 +1,190 @@
+#!/bin/bash
+
+# Deployer for Travis-CI
+# Build Script
+#
+# Builds the required targets depending on which sub-modules are enabled
+
+if [[ "$__DPL_FTP_ACTIVE" == "1" ]] || [[ "$__DPL_DPUT_ACTIVE" == "1" ]]; then
+	if [[ "$__DPL_DEBIAN_ACTIVE" == "1" ]]; then
+		echo "Building Debian package(s)"
+
+		sudo apt-get install devscripts debhelper fakeroot secure-delete expect;
+
+		# Build source packages first, since they zip up the entire source folder,
+		# binaries and all
+		if [[ "$_DPL_PACKAGE_MAIN" == "1" ]]; then
+			. ../debian_template.sh main;
+			OLDPWD=$PWD; # [repo]/build
+			cd ..; # repo root
+
+			if [[ "$_DPL_PACKAGE_SOURCE" == "1" ]]; then
+				echo "Building main source Debian package";
+				expect <(cat <<EOD
+spawn debuild -S -us -uc;
+expect "continue anyway? (y/n)"
+send "y\r"
+interact
+EOD
+);
+			fi;
+
+			if [[ "$_DPL_PACKAGE_BINARY" == "1" ]]; then
+				echo "Building main binary Debian package";
+				expect <(cat <<EOD
+spawn debuild -us -uc;
+expect "continue anyway? (y/n)"
+send "y\r"
+interact
+EOD
+);
+			fi;
+
+			cd $OLDPWD;
+		fi;
+
+		# Also an asset package
+		if [[ "$_DPL_PACKAGE_ASSET" == "1" ]]; then
+			. ../debian_template.sh asset;
+			OLDPWD=$PWD; # [repo]/build
+			cd ../assets;
+
+			# make sure the asset files exist, download them if they don't
+			#echo "Checking asset files for asset Debian package";
+			#debuild -T build;
+
+			if [[ "$_DPL_PACKAGE_SOURCE" == "1" ]]; then
+				echo "Building asset source Debian package";
+				expect <(cat <<EOD
+spawn debuild -S -us -uc;
+expect "continue anyway? (y/n)"
+send "y\r"
+interact
+EOD
+);
+			fi;
+
+			if [[ "$_DPL_PACKAGE_BINARY" == "1" ]]; then
+				echo "Building asset binary Debian package";
+				expect <(cat <<EOD
+spawn debuild -us -uc;
+expect "continue anyway? (y/n)"
+send "y\r"
+interact
+EOD
+);
+			fi;
+
+			cd $OLDPWD;
+		fi;
+
+		# Now sign our packages
+		if [[ "$DPL_PGP_KEY_PRIVATE" != "" ]] && [[ "$DPL_PGP_KEY_PASSPHRASE" != "" ]]; then
+			# Get the key to sign
+			# Do this AFTER debuild so that we can specify the passphrase in command line
+			echo "$DPL_PGP_KEY_PRIVATE" | base64 --decode > key.asc;
+			echo "$DPL_PGP_KEY_PASSPHRASE" > phrase.txt;
+			gpg --import key.asc;
+
+			if [[ "$_DPL_PACKAGE_MAIN" == "1" ]]; then
+				echo "Signing main package(s)";
+
+				PACKAGEFILENAME=${PACKAGE_NAME}_${PACKAGE_VERSION}${PACKAGE_SUBVERSION}${PACKAGE_REVISION};
+				PACKAGEDBGFILENAME=${PACKAGE_NAME}-dbg_${PACKAGE_VERSION}${PACKAGE_SUBVERSION}${PACKAGE_REVISION};
+				#PACKAGENIGHTLYFILENAME=${PACKAGE_NAME}-nightly_${PACKAGE_VERSION}${PACKAGE_SUBVERSION}${PACKAGE_REVISION};
+				#PACKAGENIGHTLYDBGFILENAME=${PACKAGE_NAME}-nightly-dbg_${PACKAGE_VERSION}${PACKAGE_SUBVERSION}${PACKAGE_REVISION};
+				#PACKAGEPATCHFILENAME=${PACKAGE_NAME}-patch_${PACKAGE_VERSION}${PACKAGE_SUBVERSION}${PACKAGE_REVISION};
+				#PACKAGEPATCHDBGFILENAME=${PACKAGE_NAME}-patch-dbg_${PACKAGE_VERSION}${PACKAGE_SUBVERSION}${PACKAGE_REVISION};
+				#PACKAGEPATCHNIGHTLYFILENAME=${PACKAGE_NAME}-patch-nightly_${PACKAGE_VERSION}${PACKAGE_SUBVERSION}${PACKAGE_REVISION};
+				#PACKAGEPATCHNIGHTLYDBGFILENAME=${PACKAGE_NAME}-patch-nightly-dbg_${PACKAGE_VERSION}${PACKAGE_SUBVERSION}${PACKAGE_REVISION};
+
+				PACKAGEFILENAMES=(
+					$PACKAGEFILENAME
+					$PACKAGEDBGFILENAME
+					#$PACKAGENIGHTLYFILENAME
+					#$PACKAGENIGHTLYDBGFILENAME
+					#$PACKAGEPATCHFILENAME
+					#$PACKAGEPATCHDBGFILENAME
+					#$PACKAGEPATCHNIGHTLYFILENAME
+					#$PACKAGEPATCHNIGHTLYDBGFILENAME
+				);
+
+				# Main packages are in parent of root repo folder
+				OLDPWD=$PWD; # [repo]/build
+				cd ../..; # parent of repo root
+
+				for n in ${PACKAGEFILENAMES}; do
+					for f in ./$n*.changes; do
+						debsign --no-re-sign -p"gpg --passphrase-file $OLDPWD/phrase.txt --batch" "$f";
+					done;
+				done;
+
+				cd $OLDPWD;
+			fi;
+
+			if [[ "$_DPL_PACKAGE_ASSET" == "1" ]]; then
+				echo "Signing asset package(s)";
+
+				PACKAGEFILENAME=${PACKAGE_NAME}-data_${PACKAGE_VERSION}${PACKAGE_SUBVERSION}${PACKAGE_REVISION};
+				#PACKAGENIGHTLYFILENAME=${PACKAGE_NAME}-nightly-data_${PACKAGE_VERSION}${PACKAGE_SUBVERSION}${PACKAGE_REVISION};
+				#PACKAGEPATCHFILENAME=${PACKAGE_NAME}-patch-data_${PACKAGE_VERSION}${PACKAGE_SUBVERSION}${PACKAGE_REVISION};
+				#PACKAGEPATCHNIGHTLYFILENAME=${PACKAGE_NAME}-patch-nightly-data_${PACKAGE_VERSION}${PACKAGE_SUBVERSION}${PACKAGE_REVISION};
+
+				PACKAGEFILENAMES=(
+					$PACKAGEFILENAME
+					#$PACKAGENIGHTLYFILENAME
+					#$PACKAGEPATCHFILENAME
+					#$PACKAGEPATCHNIGHTLYFILENAME
+				)
+
+				# Asset packages are in root repo folder
+				OLDPWD=$PWD; # [repo]/build
+				cd ..; # repo root
+
+				for n in ${PACKAGEFILENAMES}; do
+					for f in ./$n*.changes; do
+						debsign --no-re-sign -p"gpg --passphrase-file $OLDPWD/phrase.txt --batch" "$f";
+					done;
+				done;
+
+				cd $OLDPWD;
+			fi;
+
+			# Delete the keys :eyes:
+			srm key.asc;
+			srm phrase.txt;
+		fi;
+	fi;
+
+	# all other OSes
+	if [[ "$TRAVIS_OS_NAME" != "linux" ]]; then
+		#
+		# Check for binary building
+		#
+		if [[ "$_DPL_BINARY" == "1" ]]; then
+			echo "Building a Binary";
+			make -k;
+		fi;
+
+		#
+		# Check for package building
+		#
+		if [[ "$_DPL_PACKAGE_BINARY" == "1" ]]; then
+			echo "Building a Package";
+
+			# Make an OSX package; superuser is required for library bundling
+			#
+			# HACK: OSX packaging can't write libraries to .app package unless we're superuser
+			# because the original library files don't have WRITE permission
+			# Bug may be sidestepped by using CHMOD_BUNDLE_ITEMS=TRUE
+			# But I don't know where this is set. Not `cmake -D...` because this var is ignored.
+			# https://cmake.org/Bug/view.php?id=9284
+			if [[ "$TRAVIS_OS_NAME" == "osx" ]]; then
+				sudo make -k package;
+			else
+				# Some day, when Windows is supported, we'll just make a standard package
+				make -k package;
+			fi;
+		fi;
+	fi;
+fi;

deployer/travis/deployer_defaults.sh

@@ -0,0 +1,105 @@
+#!/bin/bash
+
+# Deployer for Travis-CI
+# Default Variables
+#
+# Here are all of the user-set variables used by Deployer.
+# See the "Cross-platform deployment" page on SRB2 Wiki for documentation.
+
+# Core Parameters
+: ${DPL_ENABLED}                # Enable Deployer behavior; must be set for any deployment activity
+: ${DPL_TAG_ENABLED}            # Trigger Deployer for all tag releases
+: ${DPL_JOB_ENABLE_ALL}         # Enable all jobs for deployment
+: ${DPL_TERMINATE_TESTS}        # Terminate all build test jobs (used in .travis.yml)
+: ${DPL_TRIGGER}                # Use a [word] in the commit message to trigger Deployer
+: ${DPL_JOBNAMES}               # Trigger Deployer by job name
+: ${DPL_OSNAMES}                # Trigger Deployer by OS name (osx,linux)
+: ${DPL_BRANCHES}               # Trigger Deployer by git branch name
+
+# Job Parameters
+: ${_DPL_JOB_ENABLED}           # Enable Deployer for this specific job. DPL_ENABLED must be set too.
+: ${_DPL_JOB_NAME}              # Identifier for the job, used for logging and trigger word matching
+: ${_DPL_FTP_TARGET}            # Deploy to FTP
+: ${_DPL_DPUT_TARGET}           # Deploy to DPUT
+: ${_DPL_PACKAGE_SOURCE}        # Build packages into a Source distribution. Linux only.
+: ${_DPL_PACKAGE_BINARY}        # Build packages into a Binary distribution.
+: ${_DPL_PACKAGE_MAIN:=1}       # Build main installation package. Linux only; OS X assumes this.
+: ${_DPL_PACKAGE_ASSET}         # Build asset installation package. Linux only.
+
+# Asset File Parameters
+: ${ASSET_ARCHIVE_PATH:=https://github.com/mazmazz/Kart-Public/releases/download/kart_assets/srb2kart-v102-assets.7z}
+: ${ASSET_ARCHIVE_OPTIONAL_PATH:=https://github.com/mazmazz/Kart-Public/releases/download/kart_assets/srb2kart-v102-optional-assets.7z}
+: ${ASSET_FILES_HASHED:=srb2.srb patch.kart gfx.kart textures.kart chars.kart maps.kart}
+: ${ASSET_FILES_DOCS:=README.txt HISTORY.txt LICENSE.txt LICENSE-3RD-PARTY.txt}
+: ${ASSET_FILES_OPTIONAL_GET:=0}
+
+# FTP Parameters
+: ${DPL_FTP_PROTOCOL}
+: ${DPL_FTP_USER}
+: ${DPL_FTP_PASS}
+: ${DPL_FTP_HOSTNAME}
+: ${DPL_FTP_PORT}
+: ${DPL_FTP_PATH}
+
+# DPUT Parameters
+: ${DPL_DPUT_DOMAIN:=ppa.launchpad.net}
+: ${DPL_DPUT_METHOD:=sftp}
+: ${DPL_DPUT_INCOMING}
+: ${DPL_DPUT_LOGIN:=anonymous}
+: ${DPL_SSH_KEY_PRIVATE}        # Base64-encoded private key file. Used to sign repository uploads
+: ${DPL_SSH_KEY_PASSPHRASE}     # Decodes the private key file.
+
+# Package Parameters
+: ${PACKAGE_NAME:=srb2kart}
+: ${PACKAGE_VERSION:=1.0.2}
+: ${PACKAGE_SUBVERSION}         # Highly recommended to set this to reflect the distro series target (e.g., ~18.04bionic)
+: ${PACKAGE_REVISION}           # Defaults to UTC timestamp
+: ${PACKAGE_INSTALL_PATH:=/usr/games/SRB2Kart}
+: ${PACKAGE_LINK_PATH:=/usr/games}
+: ${PACKAGE_DISTRO:=trusty}
+: ${PACKAGE_URGENCY:=high}
+: ${PACKAGE_NAME_EMAIL:=Kart Krew <stjr@srb2.org>}
+: ${PACKAGE_GROUP_NAME_EMAIL:=Kart Krew <stjr@srb2.org>}
+: ${PACKAGE_WEBSITE:=<https://mb.srb2.org/showthread.php?p=802695>}
+
+: ${PACKAGE_ASSET_MINVERSION:=1.0.1} # Number this the version BEFORE the actual required version, because we do a > check
+: ${PACKAGE_ASSET_MAXVERSION:=1.0.3}  # Number this the version AFTER the actual required version, because we do a < check
+
+: ${PROGRAM_NAME:=Sonic Robo Blast 2 Kart}
+: ${PROGRAM_VENDOR:=Kart Krew}
+: ${PROGRAM_VERSION:=1.0.2}
+: ${PROGRAM_DESCRIPTION:=A kart racing mod based on the 3D Sonic the Hedgehog fangame Sonic Robo Blast 2.}
+: ${PROGRAM_FILENAME:=srb2kart}
+
+: ${DPL_PGP_KEY_PRIVATE}        # Base64-encoded private key file. Used to sign Debian packages
+: ${DPL_PGP_KEY_PASSPHRASE}     # Decodes the private key file.
+
+# Export Asset and Package Parameters for envsubst templating
+
+export ASSET_ARCHIVE_PATH="${ASSET_ARCHIVE_PATH}"
+export ASSET_ARCHIVE_OPTIONAL_PATH="${ASSET_ARCHIVE_OPTIONAL_PATH}"
+export ASSET_FILES_HASHED="${ASSET_FILES_HASHED}"
+export ASSET_FILES_DOCS="${ASSET_FILES_DOCS}"
+export ASSET_FILES_OPTIONAL_GET="${ASSET_FILES_OPTIONAL_GET}"
+
+export PACKAGE_NAME="${PACKAGE_NAME}"
+export PACKAGE_VERSION="${PACKAGE_VERSION}"
+export PACKAGE_SUBVERSION="${PACKAGE_SUBVERSION}" # in case we have this
+export PACKAGE_REVISION="${PACKAGE_REVISION}"
+export PACKAGE_ASSET_MINVERSION="${PACKAGE_ASSET_MINVERSION}"
+export PACKAGE_ASSET_MAXVERSION="${PACKAGE_ASSET_MAXVERSION}"
+export PACKAGE_INSTALL_PATH="${PACKAGE_INSTALL_PATH}"
+export PACKAGE_LINK_PATH="${PACKAGE_LINK_PATH}"
+export PACKAGE_DISTRO="${PACKAGE_DISTRO}"
+export PACKAGE_URGENCY="${PACKAGE_URGENCY}"
+export PACKAGE_NAME_EMAIL="${PACKAGE_NAME_EMAIL}"
+export PACKAGE_GROUP_NAME_EMAIL="${PACKAGE_GROUP_NAME_EMAIL}"
+export PACKAGE_WEBSITE="${PACKAGE_WEBSITE}"
+
+export PROGRAM_NAME="${PROGRAM_NAME}"
+export PROGRAM_VERSION="${PROGRAM_VERSION}"
+export PROGRAM_DESCRIPTION="${PROGRAM_DESCRIPTION}"
+export PROGRAM_FILENAME="${PROGRAM_FILENAME}"
+
+# This file is called in debian_template.sh, so mark our completion so we don't run it again
+__DEBIAN_PARAMETERS_INITIALIZED=1

deployer/travis/deployer_dput.sh

@@ -0,0 +1,133 @@
+#!/bin/bash
+
+# Deployer for Travis-CI
+# DPUT uploader (e.g., Launchpad PPA)
+#
+
+if [[ "$__DPL_DPUT_ACTIVE" == "1" ]]; then
+    # Install APT dependencies
+    # paramiko required for ssh
+    sudo apt-get install python-paramiko expect dput; # python-pip
+    #pip install paramiko;
+
+    # Output the DPUT config
+    # Dput only works if you're using secure FTP, so that's what we default to.
+    cat > "./dput.cf" << EOM
+[deployer]
+fqdn = ${DPL_DPUT_DOMAIN}
+method = ${DPL_DPUT_METHOD}
+incoming = ${DPL_DPUT_INCOMING}
+login = ${DPL_DPUT_LOGIN}
+allow_unsigned_uploads = 0
+EOM
+
+    # Output SSH config
+    # Don't let SSH prompt us for untrusted hosts
+    cat >> "./ssh_config" << EOM
+
+Host *
+    StrictHostKeyChecking no
+    UserKnownHostsFile=/dev/null
+    PubKeyAuthentication yes
+    IdentityFile ${PWD}/key.private
+    IdentitiesOnly yes
+EOM
+    sudo sh -c "cat < ${PWD}/ssh_config >> /etc/ssh/ssh_config";
+
+    # Get the private key
+    echo "$DPL_SSH_KEY_PRIVATE" | base64 --decode > key.private;
+    chmod 700 ./key.private;
+
+    if [[ "$_DPL_PACKAGE_MAIN" == "1" ]]; then
+        PACKAGEFILENAME=${PACKAGE_NAME}_${PACKAGE_VERSION}${PACKAGE_SUBVERSION}${PACKAGE_REVISION};
+        PACKAGEDBGFILENAME=${PACKAGE_NAME}-dbg_${PACKAGE_VERSION}${PACKAGE_SUBVERSION}${PACKAGE_REVISION};
+		#PACKAGENIGHTLYFILENAME=${PACKAGE_NAME}-nightly_${PACKAGE_VERSION}${PACKAGE_SUBVERSION}${PACKAGE_REVISION};
+		#PACKAGENIGHTLYDBGFILENAME=${PACKAGE_NAME}-nightly-dbg_${PACKAGE_VERSION}${PACKAGE_SUBVERSION}${PACKAGE_REVISION};
+        #PACKAGEPATCHFILENAME=${PACKAGE_NAME}-patch_${PACKAGE_VERSION}${PACKAGE_SUBVERSION}${PACKAGE_REVISION};
+		#PACKAGEPATCHDBGFILENAME=${PACKAGE_NAME}-patch-dbg_${PACKAGE_VERSION}${PACKAGE_SUBVERSION}${PACKAGE_REVISION};
+        #PACKAGEPATCHNIGHTLYFILENAME=${PACKAGE_NAME}-patch-nightly_${PACKAGE_VERSION}${PACKAGE_SUBVERSION}${PACKAGE_REVISION};
+		#PACKAGEPATCHNIGHTLYDBGFILENAME=${PACKAGE_NAME}-patch-nightly-dbg_${PACKAGE_VERSION}${PACKAGE_SUBVERSION}${PACKAGE_REVISION};
+
+        PACKAGEFILENAMES=(
+            $PACKAGEFILENAME
+            $PACKAGEDBGFILENAME
+            #$PACKAGENIGHTLYFILENAME
+            #$PACKAGENIGHTLYDBGFILENAME
+            #$PACKAGEPATCHFILENAME
+            #$PACKAGEPATCHDBGFILENAME
+            #$PACKAGEPATCHNIGHTLYFILENAME
+            #$PACKAGEPATCHNIGHTLYDBGFILENAME
+        );
+
+        # Main packages are in parent of root repo folder
+        OLDPWD=$PWD; # [repo]/build
+        cd ../..;
+
+        # Enter passphrase if required
+        for n in ${PACKAGEFILENAMES}; do
+            for f in $n*.changes; do
+                # Binary builds also generate source builds, so exclude the source
+                # builds if desired
+                if [[ "$_DPL_PACKAGE_SOURCE" != "1" ]]; then
+                    if [[ "$f" == *"_source"* ]] || [[ "$f" == *".tar.xz"* ]]; then
+                        continue;
+                    fi;
+                fi;
+
+                expect <(cat <<EOD
+spawn dput -c "${OLDPWD}/dput.cf" deployer "$f";
+expect "Enter passphrase for key"
+send "${DPL_SSH_KEY_PASSPHRASE}\r"
+interact
+EOD
+);
+            done;
+        done;
+
+        # Go back to [repo]/build folder
+        cd $OLDPWD;
+    fi;
+
+    if [[ "$_DPL_PACKAGE_ASSET" == "1" ]]; then
+        PACKAGEFILENAME=${PACKAGE_NAME}-data_${PACKAGE_VERSION}${PACKAGE_SUBVERSION}${PACKAGE_REVISION};
+        #PACKAGENIGHTLYFILENAME=${PACKAGE_NAME}-nightly-data_${PACKAGE_VERSION}${PACKAGE_SUBVERSION}${PACKAGE_REVISION};
+        #PACKAGEPATCHFILENAME=${PACKAGE_NAME}-patch-data_${PACKAGE_VERSION}${PACKAGE_SUBVERSION}${PACKAGE_REVISION};
+        #PACKAGEPATCHNIGHTLYFILENAME=${PACKAGE_NAME}-patch-nightly-data_${PACKAGE_VERSION}${PACKAGE_SUBVERSION}${PACKAGE_REVISION};
+
+        PACKAGEFILENAMES=(
+            $PACKAGEFILENAME
+            #$PACKAGENIGHTLYFILENAME
+            #$PACKAGEPATCHFILENAME
+            #$PACKAGEPATCHNIGHTLYFILENAME
+        )
+
+        # Asset packages are in root repo folder
+        OLDPWD=$PWD; # [repo]/build
+        cd ..;
+
+        # Enter passphrase if required
+        for n in ${PACKAGEFILENAMES}; do
+            for f in $n*.changes; do
+                # Binary builds also generate source builds, so exclude the source
+                # builds if desired
+                if [[ "$_DPL_PACKAGE_SOURCE" != "1" ]]; then
+                    if [[ "$f" == *"_source"* ]] || [[ "$f" == *".tar.xz"* ]]; then
+                        continue;
+                    fi;
+                fi;
+                expect <(cat <<EOD
+spawn dput -c "${OLDPWD}/dput.cf" deployer "$f";
+expect "Enter passphrase for key"
+send "${DPL_SSH_KEY_PASSPHRASE}\r"
+interact
+EOD
+);
+            done;
+        done;
+
+        # Go back to [repo]/build folder
+        cd $OLDPWD;
+    fi;
+
+    srm ./key.private;
+fi;

deployer/travis/deployer_ftp.sh

@@ -0,0 +1,137 @@
+#!/bin/bash
+
+# Deployer for Travis-CI
+# FTP Uploader
+#
+# Package files are uploaded to, e.g., ftp://username:password@example.com:21/path/to/upload/STJr/SRB2/master/460873812-151.1
+# With file `commit.txt` and folder(s) `bin` and `package`
+#
+# Set these environment variables in your Travis-CI settings, where they are stored securely.
+# See other shell scripts for more options.
+#
+# DPL_FTP_PROTOCOL = ftp                    (ftp or sftp or ftps or however your FTP URI begins)
+# DPL_FTP_USER = username
+# DPL_FTP_PASS = password
+# DPL_FTP_HOSTNAME = example.com
+# DPL_FTP_PORT = 21
+# DPL_FTP_PATH = path/to/upload             (do not add trailing slash)
+
+if [[ "$__DPL_FTP_ACTIVE" == "1" ]]; then
+	if [[ "$TRAVIS_JOB_NAME" != "" ]]; then
+		JOBNAME=$TRAVIS_JOB_NAME;
+	else
+		if [[ "$_DPL_JOB_NAME" != "" ]]; then
+			JOBNAME=$_DPL_JOB_NAME;
+		else
+			JOBNAME=$TRAVIS_OS_NAME;
+		fi;
+	fi;
+
+	# Generate commit.txt file
+	echo "Travis-CI Build $TRAVIS_OS_NAME - $TRAVIS_REPO_SLUG/$TRAVIS_BRANCH - $TRAVIS_JOB_NUMBER - $JOBNAME" > "commit.txt";
+	echo "Job ID $TRAVIS_JOB_ID" >> "commit.txt";
+	echo "" >> "commit.txt";
+	echo "Commit $TRAVIS_COMMIT" >> "commit.txt";
+	echo "$TRAVIS_COMMIT_MESSAGE" >> "commit.txt";
+	echo "" >> "commit.txt";
+
+	# Initialize FTP parameters
+	if [[ "$DPL_FTP_PORT" == "" ]]; then
+		DPL_FTP_PORT=21;
+	fi;
+	if [[ "$DPL_FTP_PROTOCOL" == "" ]]; then
+		DPL_FTP_PROTOCOL=ftp;
+	fi;
+	__DPL_FTP_LOCATION=$DPL_FTP_PROTOCOL://$DPL_FTP_HOSTNAME:$DPL_FTP_PORT/$DPL_FTP_PATH/$TRAVIS_REPO_SLUG/$TRAVIS_BRANCH/$TRAVIS_JOB_ID-$TRAVIS_JOB_NUMBER-$JOBNAME;
+
+	# Upload to FTP!
+	echo "Uploading to FTP...";
+	curl --ftp-create-dirs -T "commit.txt" -u $DPL_FTP_USER:$DPL_FTP_PASS "$__DPL_FTP_LOCATION/commit.txt";
+
+	if [[ "$__DPL_DEBIAN_ACTIVE" == "1" ]]; then
+		if [[ "$_DPL_PACKAGE_MAIN" == "1" ]]; then
+			PACKAGEFILENAME=${PACKAGE_NAME}_${PACKAGE_VERSION}${PACKAGE_SUBVERSION}${PACKAGE_REVISION};
+			PACKAGEDBGFILENAME=${PACKAGE_NAME}-dbg_${PACKAGE_VERSION}${PACKAGE_SUBVERSION}${PACKAGE_REVISION};
+			#PACKAGENIGHTLYFILENAME=${PACKAGE_NAME}-nightly_${PACKAGE_VERSION}${PACKAGE_SUBVERSION}${PACKAGE_REVISION};
+			#PACKAGENIGHTLYDBGFILENAME=${PACKAGE_NAME}-nightly-dbg_${PACKAGE_VERSION}${PACKAGE_SUBVERSION}${PACKAGE_REVISION};
+			#PACKAGEPATCHFILENAME=${PACKAGE_NAME}-patch_${PACKAGE_VERSION}${PACKAGE_SUBVERSION}${PACKAGE_REVISION};
+			#PACKAGEPATCHDBGFILENAME=${PACKAGE_NAME}-patch-dbg_${PACKAGE_VERSION}${PACKAGE_SUBVERSION}${PACKAGE_REVISION};
+			#PACKAGEPATCHNIGHTLYFILENAME=${PACKAGE_NAME}-patch-nightly_${PACKAGE_VERSION}${PACKAGE_SUBVERSION}${PACKAGE_REVISION};
+			#PACKAGEPATCHNIGHTLYDBGFILENAME=${PACKAGE_NAME}-patch-nightly-dbg_${PACKAGE_VERSION}${PACKAGE_SUBVERSION}${PACKAGE_REVISION};
+
+			PACKAGEFILENAMES=(
+				$PACKAGEFILENAME
+				$PACKAGEDBGFILENAME
+				#$PACKAGENIGHTLYFILENAME
+				#$PACKAGENIGHTLYDBGFILENAME
+				#$PACKAGEPATCHFILENAME
+				#$PACKAGEPATCHDBGFILENAME
+				#$PACKAGEPATCHNIGHTLYFILENAME
+				#$PACKAGEPATCHNIGHTLYDBGFILENAME
+			);
+
+			# Main packages are in parent of root repo folder
+			OLDPWD=$PWD; # [repo]/build
+			cd ../..;
+
+			for n in ${PACKAGEFILENAMES}; do
+				for f in ./$n*; do
+					# Binary builds also generate source builds, so exclude the source
+					# builds if desired
+					if [[ "$_DPL_PACKAGE_SOURCE" != "1" ]]; then
+						if [[ "$f" == *"_source"* ]] || [[ "$f" == *".tar.xz"* ]]; then
+							continue;
+						fi;
+					fi;
+					curl --ftp-create-dirs -T "$f" -u $DPL_FTP_USER:$DPL_FTP_PASS  "$__DPL_FTP_LOCATION/package/main/$f";
+				done;
+			done;
+
+			# Go back to [repo]/build folder
+			cd $OLDPWD;
+		fi;
+
+		if [[ "$_DPL_PACKAGE_ASSET" == "1" ]]; then
+			PACKAGEFILENAME=${PACKAGE_NAME}-data_${PACKAGE_VERSION}${PACKAGE_SUBVERSION}${PACKAGE_REVISION};
+			#PACKAGENIGHTLYFILENAME=${PACKAGE_NAME}-nightly-data_${PACKAGE_VERSION}${PACKAGE_SUBVERSION}${PACKAGE_REVISION};
+			#PACKAGEPATCHFILENAME=${PACKAGE_NAME}-patch-data_${PACKAGE_VERSION}${PACKAGE_SUBVERSION}${PACKAGE_REVISION};
+			#PACKAGEPATCHNIGHTLYFILENAME=${PACKAGE_NAME}-patch-nightly-data_${PACKAGE_VERSION}${PACKAGE_SUBVERSION}${PACKAGE_REVISION};
+
+			PACKAGEFILENAMES=(
+				$PACKAGEFILENAME
+				#$PACKAGENIGHTLYFILENAME
+				#$PACKAGEPATCHFILENAME
+				#$PACKAGEPATCHNIGHTLYFILENAME
+			)
+
+			# Asset packages are in root repo folder
+			OLDPWD=$PWD; # [repo]/build
+			cd ..;
+
+			for n in ${PACKAGEFILENAMES}; do
+				for f in ./$n*; do
+					# Binary builds also generate source builds, so exclude the source
+					# builds if desired
+					if [[ "$_DPL_PACKAGE_SOURCE" != "1" ]]; then
+						if [[ "$f" == *"_source"* ]] || [[ "$f" == *".tar.xz"* ]]; then
+							continue;
+						fi;
+					fi;
+					curl --ftp-create-dirs -T "$f" -u $DPL_FTP_USER:$DPL_FTP_PASS  "$__DPL_FTP_LOCATION/package/asset/$f";
+				done;
+			done;
+
+			# Go back to [repo]/build folder
+			cd $OLDPWD;
+		fi;
+	else
+		if [[ "$_DPL_BINARY" == "1" ]]; then
+			find bin -type f -exec curl -u $DPL_FTP_USER:$DPL_FTP_PASS --ftp-create-dirs -T {} $__DPL_FTP_LOCATION/{} \;;
+		fi;
+
+		if [[ "$_DPL_PACKAGE_BINARY" == "1" ]]; then
+			sudo rm -r package/_CPack_Packages
+			find package -type f -exec curl -u $DPL_FTP_USER:$DPL_FTP_PASS --ftp-create-dirs -T {} $__DPL_FTP_LOCATION/{} \;;
+		fi;
+	fi;
+fi

doc/Doublescan.txt

@@ -0,0 +1,93 @@
+   ================================================================
+   How to add Low-res modes to your XF86Config under Linux MANUALLY
+   ================================================================
+
+   I TAKE NO RESPONSIBILITY FOR ANY DAMAGE DONE TO YOUR EQUIPMENT!!!
+
+   This document explains how to add low-res modes like 320x200 to your
+   X-Server configuration, because some new setup tools for the X-Server
+   do not support this. ONLY RECOMMENDED FOR USERS WHO KNOW WHAT THEY DO!
+
+   I do not take any responsibility for damage done to your monitor, your
+   videocard, your harddisk, your cat, your dog or anything else!!!
+   IMPORTANT IS, THAT YOUR "HorizSync" AND "VertRefresh" VALUES REALLY
+   MATCH YOUR MONITOR! OTHERWISE YOUR MONITOR CAN BLOW UP!!!
+
+   OK, if you have read up to here, you either know what you do or really
+   die-hard want those low-res modes. Here is what to do:
+   Look up your XF86Config. Is is either in /etc or in /etc/X11. Here is
+   what you have to add to the definition of your modeslines:
+
+# Low-res Doublescan modes
+# If your chipset does not support doublescan, you get a 'squashed'
+# resolution like 320x400.
+
+# 320x200 @ 70 Hz, 31.5 kHz hsync, 8:5 aspect ratio
+Modeline "320x200"     12.588 320  336  384  400   200  204  205  225 Doublescan
+# 320x240 @ 60 Hz, 31.5 kHz hsync, 4:3 aspect ratio
+Modeline "320x240"     12.588 320  336  384  400   240  245  246  262 Doublescan
+# 320x240 @ 72 Hz, 36.5 kHz hsync
+Modeline "320x240"     15.750 320  336  384  400   240  244  246  262 Doublescan
+# 400x300 @ 56 Hz, 35.2 kHz hsync, 4:3 aspect ratio
+ModeLine "400x300"     18     400  416  448  512   300  301  302  312 Doublescan
+# 400x300 @ 60 Hz, 37.8 kHz hsync
+Modeline "400x300"     20     400  416  480  528   300  301  303  314 Doublescan
+# 400x300 @ 72 Hz, 48.0 kHz hsync
+Modeline "400x300"     25     400  424  488  520   300  319  322  333 Doublescan
+
+   If your video card only supports a specific set of discrete dotclocks
+   (RAMDAC) you may have to replace the dotclocks given here by one of the
+   specified (e.g in the first modeline the dotclock is 12.588 MHz). I believe
+   that nowadays all cards and monitors should work with these settings, but
+   if you have outdated hardware you better check the frequencies yourself. If
+   there is any uncertainty, please check the "XFree86 Video Timings HOWTO".
+
+
+   Then have a look at the section "Screen" with the appropriate driver
+   (usually either "svga" or "accel"). Under Subsection "Display" there
+   are modes for the given color depth. Add the desired modes. As an
+   example I give you my screens definition here with low-res modes in
+   16 bit color depth:
+
+Section "Screen"
+    Driver      "accel"
+    Device      "3D Charger"
+    Monitor     "Iiyama Pro 450"
+    DefaultColorDepth 16
+
+    Subsection "Display"
+        Depth       8
+        Modes       "1280x1024" "1024x768" "800x600" "640x480"
+        ViewPort    0 0
+        Virtual     1280 1024
+    EndSubsection
+    Subsection "Display"
+        Depth       16
+        Modes       "1152x864" "1024x768" "800x600" "640x480" "400x300" "320x200" <- THIS IS ACTUALLY WHAT YOU WANT!!!
+        ViewPort    0 0                                       ^^^^^^^^^^^^^^^^^^^
+        Virtual     1152 864
+    EndSubsection
+    Subsection "Display"
+        Depth       24
+        Modes       "800x600" "640x480"
+        ViewPort    0 0
+        Virtual     800 600
+    EndSubsection
+    Subsection "Display"
+        Depth       32
+        Modes       "800x600" "640x480"
+        ViewPort    0 0
+        Virtual     800 600
+    EndSubsection
+EndSection
+
+   Once again: important is, that you edit the correct Screen section.
+   If you use the SVGA Server and edit the ACCEL Server, you might
+   wonder where your new modes have gone.
+
+   If everything went fine and you want to say thank you, just write
+   to "metzgermeister@users.sourceforge.net". If your monitor blew
+   up and you want to kill me, find me playing Legacy or Q3A on the net
+   and frag me (with your second monitor, hehe).
+
+   - metzgermeister

doc/Item Ranges.txt

@@ -0,0 +1,212 @@
+1-99 : Player Starts
+	1 - Player 1 Start		1
+	2 - Player 2 Start		2
+	3 - Player 3 Start		3
+	4 - Player 4 Start		4
+	5 - Player 5 Start 		4001
+	6 - Player 6 Start 		4002
+	7 - Player 7 Start 		4003
+	8 - Player 8 Start 		4004
+	9 - Player 9 Start 		4005
+	10 - Player 10 Start 		4006
+	11 - Player 11 Start 		4007
+	12 - Player 12 Start 		4008
+	13 - Player 13 Start 		4009
+	14 - Player 14 Start 		4010
+	15 - Player 15 Start 		4011
+	16 - Player 16 Start 		4012
+	17 - Player 17 Start 		4013
+	18 - Player 18 Start 		4014
+	19 - Player 19 Start 		4015
+	20 - Player 20 Start 		4016
+	21 - Player 21 Start 		4017
+	22 - Player 22 Start 		4018
+	23 - Player 23 Start 		4019
+	24 - Player 24 Start 		4020
+	25 - Player 25 Start 		4021
+	26 - Player 26 Start 		4022
+	27 - Player 27 Start 		4023
+	28 - Player 28 Start 		4024
+	29 - Player 29 Start 		4025
+	30 - Player 30 Start 		4026
+	31 - Player 31 Start 		4027
+	32 - Player 32 Start 		4028
+	33 - Player Match Start 	11
+	34 - Red Team Start 		87
+	35 - Blue Team Start 		89
+	36 - Tag start			New
+
+100 - 199 : Enemies
+	100 - Blue Crawla		3004
+	101 - Red Crawla		9
+	102 - GFZ Fish			58
+	103 - Gold Buzz			5005
+	104 - Red Buzz			5006
+	105 - Jetty-Syn Bomber		3005
+	106 - Jetty-Syn Gunner		22
+	107 - Crawla Commander		21
+	108 - Deton			71
+	109 - Skim			56
+	110 - THZ Turret		2004
+	111 - Pop-up Turret		42
+
+200 - 299 : Bosses and their associated items (if any)
+	200 - Boss 1			16
+	201 - Boss 2			2008
+	290 - Boss Fly Point		17
+	291 - EggTrap Center		2049
+
+300 - 399 : Collectibles
+	300 - Ring			2014
+	301 - Homing Ring		69
+	302 - Rail Ring			3003
+	303 - Infinity Ring		80
+	304 - Automatic Ring		26
+	305 - Explosion Ring		54
+	306 - Red CTF Flag		31
+	307 - Blue CTF Flag		34
+	308 - Special Stage Token	2013
+	309 - Emerald 1			420
+	310 - Emerald 2			421
+	311 - Emerald 3			422
+	312 - Emerald 4			423
+	313 - Emerald 5			424
+	314 - Emerald 6			425
+	315 - Emerald 7			426
+	316 - Hunting Emerald 1		64
+	317 - Hunting Emerald 2		3002
+	318 - Hunting Emerald 3		3001
+
+400 - 499 : Boxes
+	400 - Super Ring Box		2011
+	401 - Grey Ring Box		2012
+	402 - Ring Shield Box		48
+	403 - Fire Shield Box		2002
+	404 - Bomb Shield Box		2018
+	405 - Jump Shield Box		35
+	406 - Water Shield Box		2028
+	407 - Sneaker Box		25
+	408 - Invincibility Box		2022
+	409 - 1-Up Box			41
+	410 - Eggman Box		2005
+	411 - Mixup Box			78
+	412 - Question Box		3000
+
+500 - 599 : Interactive Objects (friendly or otherwise - includes springs)
+	500 - Bubble Patch		33
+	501 - Level End Sign		86
+	502 - Starpost			3006
+	520 - Spike Ball		-1
+	521 - Special Stage Spike Ball	23
+	522 - Ceiling Spike		67
+	523 - Floor Spike		68
+	540 - Fan			32
+	541 - Steam Riser		30
+	550 - Yellow Spring		28
+	551 - Red Spring		79
+	552 - Blue Spring		5004
+	553 - Yellow Spring Down	65
+	554 - Red Spring Down		66
+	555 - Yellow Diagonal Spring	2015
+	556 - Red Diagonal Spring	38
+	557 - Yellow Diag Spring Down	20
+	558 - Red Diag Spring Down	39
+
+600 - 699 : Special placement patterns
+	600 - Vertical Rigns - Stack of 5 (suitable for Yellow Spring)	84
+	601 - Vertical Rings - Stack of 5 (suitable for Red Spring)	44
+	602 - Diagonal rings (5)					76
+	603 - Diagonal rings (10)					77
+	604 - A ring of rings						47
+	605 - A BIGGER ring of rings					2007
+	606 - A ring of wing items					2048
+	607 - A BIGGER ring of wing items				2010
+	608 - A ring of rings and wings (alternating)			2046
+	609 - A BIGGER ring of rings and wings (alternating)		2047
+
+700 - 799 : Powerup indicators/environmental effects/miscellany
+	700 - Ambient Water 1a (S)	2026
+	701 - Ambient Water 1b (S)	2024
+	702 - Ambient Water 2a (M)	2023
+	703 - Ambient Water 2b (M)	2045
+	704 - Ambient Water 3a (L)	83
+	705 - Ambient Water 3b (L)	2019
+	706 - Ambient Water 4a (XL)	2025
+	707 - Ambient Water 4b (XL)	27
+	708 - Random Ambient 1		14
+	709 - Random Ambient 2		43
+	750 - Chaos Spawner		8
+	751 - Teleport Point		5003
+	752 - Alternate View Point	5007
+	753 - Zoom Tube Waypoint	18
+	754 - Pusher			5001
+	755 - Puller			5002
+	756 - Street Light		2003
+	
+800 - 899 : Greenflower Scenery
+	800 - Flower 1			36
+	801 - Flower 2			70
+	802 - Flower 3			73
+	804 - Berry Bush		74
+	805 - Bush			75
+
+900 - 999 : Techno Hill Scenery
+	900 - THZ Plant			2035
+	901 - Alarm			2006
+
+1000 - 1099 : Deep Sea Scenery
+	1000 - Gargoyle			81
+
+1100 - 1199 : Castle Eggman Scenery
+	1100 - Ceiling Chain		49
+	1101 - Torch Flame		24
+	1102 - Eggman Statue		52
+	1103 - CEZ Flower		2001
+
+1200 - 1299 : Arid Canyon Scenery
+1300 - 1399 : Red Volcano Scenery
+1400 - 1499 : Dark City Scenery
+1500 - 1599 : Doom Ship Scenery
+1600 - 1699 : Egg Rock/Final Fight Scenery
+1700 - 1799 : NiGHTS Items
+	1700 - Axis			72
+	1701 - Axis Transfer (Normal)	61
+	1702 - Axis Transfer (Line)	46
+	1703 - Nights Drone		60
+	1704 - Nights Bumper		82
+	1705 - Hoop			57
+	1706 - Nights Wing		37
+	1707 - Super Loop Powerup	3007
+	1708 - Drill Refill Powerup	3008
+	1709 - Helper Powerup		3009
+	1710 - Egg Capsule		40
+
+1800 - 1849 : Mario Items
+	1800 - Coin			10005
+	1801 - Goomba			10000
+	1802 - Blue Goomba		10001
+	1803 - FireFlower		50
+	1804 - Shell			10
+	1805 - Puma			29
+	1806 - Koopa			19
+	1807 - Axe			12
+	1808 - Mario Bush 1		10002
+	1809 - Mario Bush 2		10003
+	1810 - Toad			10004
+
+1850 - 1899 : Christmas Items
+	1850 - Xmas Pole		5
+	1851 - Candy Cane		13
+	1852 - Snowman			6
+
+1900 - 1999 : Misc Scenery
+	1900 - Stalagmite 0
+	1901 - Stalagmite 1
+	1902 - Stalagmite 2
+	1903 - Stalagmite 3
+	1904 - Stalagmite 4
+	1905 - Stalagmite 5
+	1906 - Stalagmite 6
+	1907 - Stalagmite 7
+	1908 - Stalagmite 8
+	1909 - Stalagmite 9

doc/Linedef Ranges.txt

@@ -0,0 +1,223 @@
+	Description	OldNum	NewNum	Description
+	Old Water 	14	Removed	
+
+	Level Parameters/Misc:			
+	Per-Sector Gravity 	64	1	
+	Custom Exit 	71	2	
+	Zoom Tube Parameters 	18	3	
+	Speed Pad 	65	4	
+	Camera Scanner 	63	5	
+	Disable Linedef 	73	6	
+	Flat Alignment 	66	7	
+	Sector Special Parameters	New	8	
+	Mace Parameters	New	9	
+	Sprite Cull Height	New	10	
+	Rope Hang Parameters	New	11
+	Rock Spawner Parameters	New	12
+
+	PolyObjects
+	Marks first line in PolyObject	New	20
+	Explicitly includes a PolyObject line	New	21
+	PolyObject: Parameters	New	22
+	PolyObject: Waving Flag	New	31
+
+	Level-Load Effects:		
+	Instant Floor Lower 	26	50
+	Instant Ceiling Raise 	24	51
+	Continuously Falling Sector 	88	52
+	Continuous Floor/Ceiling Mover 	2	53
+	Continuous Floor Mover 	3	54
+	Continuous Ceiling Mover 	4	55
+	Continuous Two-Speed Floor/Ceiling Mover 	6	56
+	Continuous Two-Speed Floor Mover 	7	57
+	Continuous Two-Speed Ceiling Mover 	8	58
+	Activate Floating Platform 	232	59
+	Activate Floating Platform (Adjustable Speed) 	233	60
+	Crusher 1 (Ceiling to Floor) 	43	61
+	Crusher 2 (Floor to Ceiling) 	50	62
+	Fake Floor/Ceiling	242	63
+	Appearing/Disappearing FOF	New	64
+	Bridge Thinker	New	65
+
+	Floor Over Floors:		
+	"Floor Over Floor: Solid, Opaque, Shadowcasting "	25	100
+	"Floor Over Floor: Solid, Opaque, Non-Shadowcasting "	33	101
+	"Floor Over Floor: Solid, Translucent "	44	102
+	"Floor Over Floor: Solid, Sides Only "	69	103
+	"Floor Over Floor: Solid, No Sides "	51	104
+	"Floor Over Floor: Solid, Invisible "	57	105
+
+	"Floor Over Floor: Water, Opaque "	48	120
+	"Floor Over Floor: Water, Translucent "	45	121
+	"Floor Over Floor: Water, Opaque, No Sides "	75	122
+	"Floor Over Floor: Water, Translucent, No Sides "	74	123
+
+	"Floor Over Floor: Platform, Opaque "	59	140
+	"Floor Over Floor: Platform, Translucent "	81	141
+	"Floor Over Floor: Platform, Translucent, No Sides "	77	142
+
+	Floor Over Floor: Bobbing (Air) 	38	150
+	Floor Over Floor: Adjustable Bobbing (Air) 	68	151
+	Floor Over Floor: Reverse Adjustable Bobbing (Air) 	72	152
+
+	"Floor Over Floor: Floating, Bobbing "	34	160
+
+	Floor Over Floor: Crumbling (Respawn) 	36	170
+	Floor Over Floor: Crumbling (No Respawn) 	35	171
+	"Floor Over Floor: Crumbling (Respawn), Platform  "	79	172
+	"Floor Over Floor: Crumbling (No Respawn), Platform  "	80	173
+	"Floor Over Floor: Crumbling (Respawn), Platform, Translucent "	82	174
+	"Floor Over Floor: Crumbling (No Respawn), Platform, Translucent "	83	175
+	"Floor Over Floor: Crumbling (Respawn), Floating, Bobbing "	39	176
+	"Floor Over Floor: Crumbling (No Respawn), Floating, Bobbing "	1	177
+	"Floor Over Floor: Crumbling (Respawn), Floating "	37	178
+	"Floor Over Floor: Crumbling (No Respawn), Floating "	42	179
+	"Floor Over Floor: Crumbling (Respawn), Bobbing (Air) "	40	180
+
+	"Floor Over Floor: Rising Platform, Solid, Opaque, Shadowcasting "	89	190
+	"Floor Over Floor: Rising Platform, Solid, Opaque, Non-Shadowcasting "	90	191
+	"Floor Over Floor: Rising Platform, Solid, Translucent "	91	192
+	"Floor Over Floor: Rising Platform, Solid, Invisible "	94	193
+	"Floor Over Floor: Rising Platform, Platform, Opaque "	92	194
+	"Floor Over Floor: Rising Platform, Platform, Translucent "	93	195
+
+	Floor Over Floor: Light Block 	49	200
+	Floor Over Floor: Half Light Block 	47	201
+	Floor Over Floor: Fog Block 	46	202
+
+	"Floor Over Floor: Intangible, Opaque "	62	220
+	"Floor Over Floor: Intangible, Translucent "	52	221
+	"Floor Over Floor: Intangible, Sides Only "	67	222
+	"Floor Over Floor: Intangible, Invisible "	58	223
+
+	Floor Over Floor: Mario Block 	41	250
+	Floor Over Floor: Thwomp Block 	54	251
+	Floor Over Floor: Shatter Block 	76	252
+	"Floor Over Floor: Shatter Block, Translucent "	86	253
+	Floor Over Floor: Bustable Block 	55	254
+	Floor Over Floor: Spin Bust Block 	78	255
+	"Floor Over Floor: Spin Bust Block, Translucent "	84	256
+	Floor Over Floor: Quicksand Block 	56	257
+	Floor Over Floor: Laser Block 	53	258
+	Floor Over Floor: Custom 	87	259
+
+	Linedef Executor Triggers:		
+	Trigger Linedef Executor (Continuous) 	96	300
+	Trigger Linedef Executor (Each Time) 	97	301
+	Trigger Linedef Executor (Once) 	98	302
+	Trigger Linedef Executor (Ring Count - Continuous) 	95	303
+	Trigger Linedef Executor (Ring Count - Once) 	99	304
+	Trigger Linedef Executor (Character Ability - Continuous) 	19	305
+	Trigger Linedef Executor (Character Ability - Each Time) 	20	306
+	Trigger Linedef Executor (Character Ability - Once) 	21	307
+	"Trigger Linedef Executor (Race Only, Once) "	9	308
+	Trigger Linedef Executor (CTF Red Team - Continuous) 	10	309
+	Trigger Linedef Executor (CTF Red Team - Each Time) 	11	310
+	Trigger Linedef Executor (CTF Blue Team - Continuous) 	12	311
+	Trigger Linedef Executor (CTF Blue Team - Each Time) 	13	312
+	Trigger Linedef Executor (No More Enemies - Once) 	15	313
+	Trigger Linedef Executor (# of Pushables - Continuous)	New	314
+	Trigger Linedef Executor (# of Pushables - Once)	New	315
+	Trigger Linedef Executors (PolyObject - Land On)	New	316
+	Trigger Linedef Executor (Level Load)	New	399
+
+	Linedef Executor Options:		
+	Linedef Executor: Set Tagged Sector's Floor Height/Pic 	101	400
+	Linedef Executor: Set Tagged Sector's Ceiling Height/Pic 	102	401
+	Linedef Executor: Set Tagged Sector's Light Level 	103	402
+	Linedef Executor: Move Tagged Sector's Floor 	106	403
+	Linedef Executor: Move Tagged Sector's Ceiling 	107	404
+	Linedef Executor: Lower Floor by Line 	108	405
+	Linedef Executor: Raise Floor by Line 	109	406
+	Linedef Executor: Lower Ceiling by Line 	110	407
+	Linedef Executor: Raise Ceiling by Line 	111	408
+	Linedef Executor: Change Calling Sector's Tag 	112	409
+	Linedef Executor: Change Front Sector's Tag 	114	410
+	Linedef Executor: Stop Plane Movement 	116	411
+	Linedef Executor: Teleport Player to Tagged Sector 	104	412
+	Linedef Executor: Change Music 	105	413
+	Linedef Executor: Play SFX 	115	414
+	Linedef Executor: Run Script 	113	415
+	Linedef Executor: Start Adjustable Fire Flicker 	119	416
+	Linedef Executor: Start Adjustable Glowing Light 	120	417
+	Linedef Executor: Start Adjustable Strobe Flash (unsynchronized)	New	418
+	Linedef Executor: Start Adjustable Strobe Flash (synchronized)	New	419
+	Linedef Executor: Fade Light Level 	117	420
+	Linedef Executor: Stop Lighting Effect 	118	421
+	Linedef Executor: Cut-Away View 	121	422
+	Linedef Executor: Change Sky 	123	423
+	Linedef Executor: Change Weather 	124	424
+	Linedef Executor: Change Object State 	125	425
+	Linedef Executor: Stop Object 	122	426
+	Linedef Executor: Award Score 	126	427
+	Linedef Executor: Start Platform Movement 	127	428
+	Linedef Executor: Crush Ceiling Once	New	429
+	Linedef Executor: Crush Floor Once	New	430
+	Linedef Executor: Crush Floor & Ceiling Once	New	431
+	Linedef Executor: Enable 2D Mode	New	432
+	Linedef Executor: Disable 2D Mode	New	433
+	Linedef Executor: Award Custom Power	New	434
+	Linedef Executor: Stop Conveyor	New	435
+	Linedef Executor: Start Conveyor	New	436
+	Linedef Executor: Disable Player Movement	New	437
+
+	Linedef Executor: Execute Linedef Executor	New	450
+
+	Linedef Executor: PolyObject: Door Slide	New	480
+	Linedef Executor: PolyObject: Door Swing	New	481
+	Linedef Executor: PolyObject: Move XY	New	482
+	Linedef Executor: PolyObject: Move XY w/ override	New	483
+	Linedef Executor: PolyObject: Rotate Right	New	484
+	Linedef Executor: PolyObject: Rotate Right w/ override	New	485
+	Linedef Executor: PolyObject: Rotate Left	New	486
+	Linedef Executor: PolyObject: Rotate Left w/ override	New	487
+	Linedef Executor: PolyObject: Start waypoint movement	New	488
+	Linedef Executor: PolyObject: Make Invisible	New	489
+	Linedef Executor: PolyObject: Make Visible	New	490
+
+	Scrollers/Pushers:		
+	Scroll Wall First Side Left 	100	500
+	Scroll Wall First Side Opposite Direction 	85	501
+	Scroll Wall According to Linedef 	254	502
+	Acc Scroll Wall According to Linedef 	218	503
+	Disp Scroll Wall According to Linedef 	249	504
+	Scroll Texture by Offsets 	255	505
+
+	Scroll Floor Texture 	251	510
+	Acc Scroll Floor Texture 	215	511
+	Disp Scroll Floor Texture 	246	512
+	Scroll Ceiling Texture 	250	513
+	Acc Scroll Ceiling Texture 	214	514
+	Disp Scroll Ceiling Texture 	245	515
+
+	Carry Objects on Floor (no scroll)	252	520
+	Acc Carry Objects on Floor 	216	521
+	Disp Carry Objects on Floor 	247	522
+	Carry Objects on Ceiling 	203	523
+	Acc Carry Objects on Ceiling 	205	524
+	Disp Carry Objects on Ceiling 	201	525
+
+	Scroll Floor Texture and Carry Objects 	253	530
+	Acc Scroll Floor Texture and Carry Objects 	217	531
+	Disp Scroll Floor Texture and Carry Objects 	248	532
+	Scroll Ceiling Texture and Carry Objects 	202	533
+	Acc Scroll Ceiling Texture and Carry Objects 	204	534
+	Disp Scroll Ceiling Texture and Carry Objects 	200	535
+
+	Friction 	223	540
+	Horizontal Wind 	224	541
+	Upwards Wind 	229	542
+	Downwards Wind 	230	543
+	Horizontal Current 	225	544
+	Upwards Current 	227	545
+	Downwards Current 	228	546
+	Boom Push/Pull Thing 	226	547
+
+	Lighting:		
+	Floor Lighting 	213	600
+	Ceiling Lighting 	5	601
+	Adjustable Pulsating Light 	60	602
+	Adjustable Flickering Light 	61	603
+	Adjustable Blinking Light (unsynchronized)	New	604
+	Adjustable Blinking Light (synchronized)	New	605
+	Colormap 	16	606

doc/Sector Ranges.txt

@@ -0,0 +1,78 @@
+Removed:
+	- Buttons 1-20					690-709
+	- Button 21 (THZ2 A/740 B/741 D/742 E/745	710
+	- Close Door Blazing (Tag 743)			711
+	- Raise Ceiling to Highest (Tag 744)		981
+	- THZ2 Slime Raise (B/712 W713 P714 D715 S716)	986
+
+Stuff to Remove/Change:
+	- Light Blinks On Every 0.5 Seconds		2 Add Linedef Combine
+	- Light Blinks On Every 1 Second		3 Add Linedef Combine
+	- Light Pulses Smoothly			8 Remove
+	- Light Blinks On Every 0.5 Seconds (Sync)	12 Add Linedef Combine
+	- Lights Blinks On Every 1 Second (Sync)	13 Add Linedef Combine
+	- Light Flickers Like Fire			17 Remove
+	? - Damage (Fire) and Current			519 Remove (convert to combination)
+	? - Damage (Water) and Current			984 Remove (convert to combination)
+
+Section 1:
+	1 - Damage (Generic)				11
+	2 - Damage (Water)				983
+	3 - Damage (Fire)				7
+	4 - Damage (Electrical)				18
+	5 - Spikes					4
+	6 - Death Pit (Camera Mod)			16
+	7 - Death Pit (No Camera Mod)			5
+	8 - Instant Kill				10
+	9 - Ring Drainer (Floor Touch)			978
+	10 - Ring Drainer (No Floor Touch)		980
+	11 - Special Stage Damage			9
+	12 - Space Countdown				6
+	13 - Ramp Sector (Increase step-up)		992
+	14 - Non-Ramp Sector (Don't step-down)		996
+	15 - Bouncy Sector (FOF Control Only)		14
+
+Section 2:		<< 4
+	1 - Trigger Linedef Exec (Pushable Objects)	971
+	2 - Trigger LD Exec (Anywhere in Sec/All Pls)	972
+	3 - Trigger Linedef Exec (Floor Touch/All Pls)	973
+	4 - Trigger Linedef Exec (Anywhere in Sec)	974
+	5 - Trigger Linedef Exec (Floor Touch)		975
+	6 - Trigger Linedef Exec (Emerald Check)	967
+	7 - Trigger Linedef Exec (NiGHTS Mare)		968
+	8 - Check for linedef executor on FOFs (ANY)	970
+	9 - Egg Trap Capsule				666
+	10 - Special Stage Time/Rings, Par		990
+	11 - Custom Global Gravity			991
+
+Section 3:		<< 8
+	1 - Ice/Sludge (required?!)			256
+	2 - Wind/Current (required?!)			512
+	3 - Ice/Sludge and Wind/Current			768
+	4 - Conveyor Belt				985
+	5 - Speed Pad (No Spin)				976
+	6 - Speed Pad (Spin)				977
+	7 - Bustable Block Sprite Parameter		1500-1515
+	8 - "
+	9 - "
+	10 - "
+	11 - "
+	12 - "
+	13 - "
+	14 - "
+	15 - "
+
+Section 4:		<< 12
+	1 - Starpost Activator				993
+	2 - Special Stage Goal	Combine			33
+	2 - Exit Sector		Combine			982
+	2 - No Tag Zone		Combine			987
+	2 - CTF: Flag Return	Combine			995
+	3 - CTF: Red Team Base				988
+	4 - CTF: Blue Team Base				989
+	5 - Fan Sector					997
+	6 - Super Sonic Transform			969
+	7 - Spinner					979
+	8 - Zoom Tube Start				998
+	9 - Zoom Tube End				999
+	10 - Finish Line				994

doc/faq.txt

@@ -0,0 +1,307 @@
+ SRB2
+ Release v1.09, ? 2005.
+
+ Last Updated: June 2005
+
+ Original game & sources by: Id Software.
+ Additions: (c)1998 by: Fabrice Denis & Boris Pereira
+            (c)1999 by: Fabrice Denis, Boris Pereira & Thierry Van Elsuwe
+            (c)2000 by: Boris Pereira & Thierry Van Elsuwe
+            (c)2004 By: AJ, Graue, Alam Arias, Logan Arias & Andrew Clunis
+
+ Special thanks to Steven McGranahan,  Lee Killough, Robert Bäuml and Bell Kin for
+ their large contribution and to other DooM LEGACY & SRB2 Team members.
+
+ Web site: http://www.SRB2.org/
+   e-mail: none@none.com
+
+ OpenGL specific:
+ Web site: http://legacy.newdoom.com/gl
+
+
+ -----------------------------------------------------------------------
+ F.A.Q.
+ -----------------------------------------------------------------------
+
+
+ If you have any trouble with SRB2, you might find a solution
+ here.
+
+ If you find a solution to a problem that was not listed here,
+ please tell us so that we can update the FAQ and help other people!
+
+ Mail your hardware/software problems to:
+
+ None@none.com subject: FAQ
+
+
+ --------
+ CONTENTS
+ --------
+
+ [0] Miscellaneous
+ [1] Mouse/Joystick/Keyboard
+ [2] Video
+ [3] Sound
+ [4] Network
+ [5] Troubleshooting
+
+
+ -----------------
+ [0] MISCELLANEOUS
+ -----------------
+
+ * under win95 or OS/2, I don't have enough memory. How can i handle with ?
+
+   Tell win95 to put more dpmi memory for your dos box.
+   Or use the -mb option.
+
+
+
+ ---------------------------
+ [1] MOUSE/JOYSTICK/KEYBOARD
+ ---------------------------
+
+ * My mouse/joystick does not work in SRB2.
+
+   First, check that the mouse/joystick is activated : go at the
+   console and type either 'use_mouse' (or use the respective
+   menuitem) or 'use_joystick'.
+
+   If it tells '0' or off than the mouse/joystick is not used,
+   set the variable to 1. eg: 'use_mouse 1'.
+
+   For the joystick, different values will support different
+   types of joystick, check the console documentation for the
+   command 'use_joystick' for more.
+
+   Even if the mouse or joystick is activated, you have to
+   set up the contols into the Setup Controls menu. That is:
+   tell what use you will make of the mouse/joystick buttons.
+
+
+ ---------
+ [2] VIDEO
+ ---------
+
+
+ * Where are the other video modes ? I have only '320x200' in the
+   Video Modes menu.
+
+   DOS
+   ---
+
+   SRB2 adds new video modes only if a VESA2 (or better) driver
+   is present. The VESA2 driver is a standard of 'talking' between a
+   program and the huge amount of different graphics cards
+   available today.
+
+   If you don't have a VESA2 driver, you can download UNIVBE, or
+   SMART DISPLAY DOCTOR from
+
+   http://www.scitechsoft.com/products/ent/free_titles.html
+
+   or if you have an S3 based card, you can download the free
+   software called 'S3VBE'.
+
+   ftp://ftp.externet.hu/pub/mirror/sac/graph/s3vbe318.zip
+   ftp://ftp.digsys.bg/pub/simtelnet/msdos/graphics/s3vbe318.zip
+   http://www.filesearching.com/cgi-bin/s?q=s3vbe318.zip
+   http://www.google.com/search?q=s3vbe318.zip
+
+ * The game doesn't restore the video mode I have chosen the last time
+   I played SRB2.
+
+   The current video mode has to be made the 'default' so that it is
+   saved to the config : press the key 'D' on the Video Options menu
+   to set the current video mode the default.
+
+  * I have some problems with OpenGL mode
+
+   Have a look at the FAQ for OpenGL on the glLegacy web site:
+
+   http://www.doomnation.com/gllegacy/faqe.htm
+
+ # Linux: I only have a 1024x768 (or 800x600, 1280x1024, ...) resolution
+   in fullscreen mode under X and SRB2 is really really slow. Can I
+   have lower resolutions like 320x200 in fullscreen mode as well?
+
+   Probably yes. SRB2 can only use the resolutions offered by the
+   X-Server. So if all fullscreen modes have a very high resolution you
+   have to modify /etc/XF86Config (or /etc/X11/XF86Config). Use XF86Setup
+   (or the appropriate tool coming with your distribution - sax,
+   xf86config, ...) to do this.
+   If you do not succeed there, you can enter them manually into your
+   XF86Config file. ONLY RECOMMENDED FOR USERS WHO KNOW WHAT THEY DO!
+   For a short guide on how to do this, have a look at the file
+   "Doublescan.txt".
+   In case of doubt consult the XFree86-HOWTO (or ask your system
+   administrator :).
+
+ # Linux: I cannot have any fullscreen modes at all!
+
+   You have only modes above 1024x768 in your XF86Config. Proceed as
+   described above.
+
+ # Linux: After a certain idle time my screensaver jams the display of
+   SRB2. I can still operate SRB2, but I do not see what's happening
+   and the screensaver won't go away.
+
+   You probably have KDE. The KDE screensaver does not obey the screensaver
+   rules (at least mine, version 1.1). The solution is to deactivate the
+   KDE screensaver and use another screensaver (like the xscreensaver,
+   e.g.). But the hell, when you started SRB2 you should have played it
+   as well and not left it alone!!!
+
+ ---------
+ [3] SOUND
+ ---------
+
+ + DOS:I can't have CD audio music, why ?
+
+   Make sure that the MSCDEX driver version 2.0 or later is loaded.
+   If it says 'MSCDEX version xxx' at game startup, and you still
+   don't hear the cd music, then probably your card doesn't respond
+   when SRB2 tries to set the cd volume. If so, make sure your sound
+   card's mixer have the cd volume set up so that you can hear something.
+
+ + When the CD plays, the game is very 'jerky'. It doesn't do that when
+   I type 'cd off' in the console.
+
+   You have an old/bad cd driver, that can take up to a second to
+   respond to cd driver commands. Either get the latest version of
+   your driver, or turn cd update off. Check 'cd_udpate' in the
+   console documentation for more.
+
+ * DOS:How can I *ALWAYS* disable the sounds or music of the game ?
+
+   Edit the allegro.cfg file and set digicard/midicard to 0 (none)
+
+ * DOS:My sterero sound is reversed, how can I set it the right way ?
+
+   Change the console variable 'stereoreverse' to either 1 or 0.
+   Or, you can edit the allegro.cfg file, and set the 'flip_pan' variable.
+
+
+ * DOS:The sounds are too 'slow', or 'low-pitched'
+
+   It seems to be a problem of the auto-detection of some 8bit sound
+   cards. You will have to set manually the 'sb_freq' value in the
+   allegro.cfg file to a lower value : 11906, 16129.
+
+ * DOS:SRB2 doesn't play any sound/music, but I have a sound
+   blaster genuine/compatible card.
+
+   If you have a genuine or compatible SoundBlaster card, it is very
+   important that you set the BLASTER environment variable.
+
+   If you are playing under DOS, and never installed your sound card
+   under DOS, run the setup of your sound card for DOS.
+
+   Check if the BLASTER variable was set: type 'SET' under dos
+   (or DOSbox)
+
+   Do you see something like 'BLASTER=A220 I5 D1 ...' ?
+
+   Yes? If you don't hear sounds/music, then tweak the settings in the
+   allegro.cfg file until you get something, first try changing the
+   type of the sound card, it is not always properly detected.
+
+   No? You have to set this variable in order that your sound card is
+   detected. Run the setup that was shipped with your sound card, and
+   make sure you run the setup for DOS too, it will usually add a
+   line of the type 'SET BLASTER=... ...' in the autoexec.bat file.
+
+
+ * DOS:How can I have better midi music on my 8bit sound card ?
+
+   Use the DIGMID driver, it is supported in SRB2.
+
+   What the hell is this? Well, the Gravis Ultrasound uses digital
+   samples to play midi music. On a simple 8bit card, you can use digital
+   samples too, which will sound usually better than what is output
+   by the poor fm synthesis chip of 8bit cards.
+
+   You will need to get a Gravis Ultrasound patch set, you can find
+   several ones for free on internet, it consists of a bunch of '.pat'
+   files which are the digital samples to play the midi instruments
+   (eg: piano, conga, guitar, ect.).
+
+   Check the Allegro homepage for some links to GUS patches:
+   http://alleg.sourceforge.net/digmid.html
+   http://alleg.sourceforge.net/
+   http://www.talula.demon.co.uk/allegro/digmid.html
+   http://www.talula.demon.co.uk/allegro/
+
+   Now to activate the DIGMID driver:
+
+   Set the 'midi_card' value to 8 (DIGMID) in the allegro.cfg file.
+   Make sure you leave the 'digi_voices' blank, or set it to a low
+   value, because the midi music will use digital voices.
+   At the end of the allegro.cfg file, set the 'patches' value
+   to the path, where you have installed a Gravis Ultrasound midi
+   patch set. eg: patches = d:\music\midipat\
+
+ # Linux: CD music does not work or only works when run as root.
+
+   We do not encourage you to run SRB2 as root (you never know
+   what SRB2 can do to your system - it's a mighty piece of code :).
+   There is a common problem with ATAPI CD-rom drives, which are
+   treated as harddisks. Usually there is a link /dev/cdrom pointing to
+   device hd[b,c,d]. As harddisks are not supposed to be read directly
+   via this device (especially not by a common user), there are no read
+   permissions for "all". For CD-roms you can savely set read permissions
+   unless you are very paranoid. Assuming your CD-rom drive is /dev/hdc,
+   set permissions with "chmod +r /dev/hdc" (as root). SCSI CD-rom drives
+   should not have this problem. But if they do, proceed as described
+   with ATAPI drives.
+
+ # Linux: The CD music volume is not set properly.
+
+   Go to the console and type "jigglecdvolume 1".
+
+ -----------
+ [4] NETWORK
+ -----------
+
+ * Where can I find Internet servers ?
+
+   For the moment there is one public server.
+   http://srb2.servegame.org/ Master server web page
+   srb2.servegame.org:28910 current Master Server
+
+ * When I start SRB2 with -server or -connect it say :
+    "BinToPort: Address already in use (EADDRINUSE)"
+
+   It appears only when SRB2 crashes or when you leave with ctrl-break.
+   use -udpport 12345 (or any other free slot) on both sides (client and
+   server).
+
+   This can also happens when there is already a SRB2 running on your
+   computer if you whant to try two SRB2 running on the same computer
+   use -clientport 12345 (or any other free slot). Then the second will
+   connect to the first one.
+
+ * Do you use the tcp protocol ?
+
+   No, we use the udp protocol which is faster, but don't worry udp is a
+   part of the internet protocol.
+
+
+ -------------------
+ [5] Troubleshooting
+ -------------------
+
+ # Linux: SRB2 is hung in fullscreen mode and won´t let me leave.
+   What shall I do?
+
+   Some people press the reset button, but hey, we are not in the
+   stoneage of operating systems! There are two "proper" ways to
+   get out: kill your X-Server. You can usually do this by pressing
+   "CTRL-ALT-BACKSPACE". But if you have other open applications with
+   important data (probably hacked away on your diploma thesis for 3
+   weeks without saving once) you can also kill SRB2 directly. Press
+   "CTRL-ALT-F2" and you will get to a console. Log in, type
+   "killall llxSRB2" and switch back to the X-Server with "CTRL-ALT-F7".
+   Some X-Server crash on this procedure - blame the X-Server for the
+   loss of 3 weeks work on your diploma thesis :)

doc/manual/manual.htm

@@ -0,0 +1,68 @@
+<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN" "http://www.w3.org/TR/html4/loose.dtd">
+<html>
+<head>
+	<title>
+		Sonic Robo Blast 2 Manual
+	</title>
+	<link rel="stylesheet" type="text/css" href="srb2manstyle.css">
+	<!-- Borrowed some javascript code so the height of the iframe is equal to the size of the document - Sonict -->
+	<script type="text/javascript">
+	/* free code from dyn-web.com */
+
+	function getDocHeight(doc) {
+		doc = doc || document;
+		// from http://stackoverflow.com/questions/1145850/get-height-of-entire-document-with-javascript
+		var body = doc.body, html = doc.documentElement;
+		var height = Math.max( body.scrollHeight, body.offsetHeight,
+			html.clientHeight, html.scrollHeight, html.offsetHeight );
+		return height;
+}
+
+	function setIframeHeight(id) {
+		var ifrm = document.getElementById(id);
+		var doc = ifrm.contentDocument? ifrm.contentDocument: ifrm.contentWindow.document;
+		ifrm.style.visibility = 'hidden';
+		ifrm.style.height = "10px"; // reset to minimal height in case going from longer to shorter doc
+		ifrm.style.height = getDocHeight( doc ) + "px";
+		ifrm.style.visibility = 'visible';
+	}
+	</script>
+	<meta http-equiv="Content-type" content="text/html; charset=UTF-8">
+</head>
+<body>
+	<p class="c1">
+		<img src="manual_img/sonicname2.png" alt="SONIC" width="136" height="36">
+		<br>
+		<img src="manual_img/srb2banner.png" alt="ROBO BLAST 2" width="224" height="43">
+	</p>
+	<p class="c1">
+		<big><big><strong>Manual</strong></big></big>
+	</p>
+	<table class="cf" align="center">
+		<tr><td class="c">
+		<ul class="hmenu">
+			<li class="hmenu"><a class="hmenu" href="intro.htm" target="ifrm">Main</a></li>
+			<li class="hmenu"><a class="hmenu" href="items.htm" target="ifrm">Items</a></li>
+			<li class="hmenu"><a class="hmenu" href="playerabilities.htm" target="ifrm">Player Abilities</a></li>
+			<li class="hmenu"><a class="hmenu" href="basicplay.htm" target="ifrm">Gameplay</a></li>
+			<li class="hmenu"><a class="hmenu" href="surroundings.htm" target="ifrm">Surroundings</a></li>
+		</ul>
+		</td></tr>
+		<tr><td class="c">
+		<ul class="hmenu">
+			<li class="hmenu"><a class="hmenu" href="multiplayer.htm" target="ifrm">Multiplayer</a></li>
+			<li class="hmenu"><a class="hmenu" href="zones.htm" target="ifrm">Zones</a></li>
+			<li class="hmenu"><a class="hmenu" href="controls.htm" target="ifrm">Controls</a></li>
+			<li class="hmenu"><a class="hmenu" href="consolecommands.htm" target="ifrm">Console Commands</a></li>
+			<li class="hmenu"><a class="hmenu" href="misc.htm" target="ifrm">Misc</a></li>
+		</ul>
+		</td></tr>
+	</table>
+	<hr>
+	<p class="c1">
+		<!-- The "onload" property of the iframe makes an error when validated through the W3C validation checker. -->
+		<!-- This will not be fixed as it isn't worth the time to fix it up properly. - Sonict -->
+		<iframe id="ifrm" name="ifrm" src="intro.htm" onload="setIframeHeight(this.id)"> </iframe>
+	</p>
+</body>
+</html>

doc/rules.txt

@@ -0,0 +1,39 @@
+SVN-RULES
+
+- As you can see, there is sub-directory in the repository, one for eatch
+  platform (djgpp (dos),win32,SDL) the root directory is for all platform,
+  so take care of the order we have put in.
+- do not commit/upload tests of bugged code, try to fix a maximum of know
+  bugs and update know bugs list in source.txt. If you must commit your source
+  make your code in #ifdef so we can disable it
+- SRB2 is a modification of doom/Doom Legacy source. We allow additionnal feature
+  and visual addition.
+- Maximize communications between members, do not impose your changes, if your
+  are not sure about a feature/change, talk about it in irc://irc.esper.net/srb2 chat room.
+
+CODE-RULES
+
+- We use no tab, 4 space indent, and tab size 8 (in case some tab have filtred
+  and for makefile)
+- Self documented code, variable and function must have a name that help
+  understand the code, so do not call variable and function a,b, a2, ...
+- the usage of extern in a c file is prohibited, except for declaration of a
+  function with body (so it is like public keyword in c++)
+  Also function protos haren't allowed for external function, put it un the
+  corresponding h file.
+- Try to minimize #ifdef usage for :
+  - code readability
+  - the main code is for all port so if something is good for a platform all
+    platform can benefit by this feature
+- Take care of platform dependent code, we would like to have code that work
+  on Dos, Win32, SDL, ... little and big endian, software/Glide/OpenGl.
+
+GOOD PRACTICE
+
+- Try to put as mush static variable and function on module so it help to
+  understand the role of the varaible/function in the module also this
+  help the compiler to optimize
+- minimise global variable
+- make a log of your work, so you don't need to put a lot of comment in
+  the code, this will also help us to update the what's new section of doc
+  when doing final release

doc/source.txt

@@ -0,0 +1,240 @@
+
+1. Compile SRB2
+2. Explanation of the code
+ 2.1 The memory model
+ 2.2 Hardware Texture model
+
+1. Compile SRB2
+=================
+
+DOS
+---
+
+need:
+- djgpp 2.03     (http://www.delorie.com/djgpp/)
+- allegro 3.12   (http://alleg.sourceforge.net/index.html)
+(
+- libsocket 0.7.4 (beta 4) or better
+   for use with Winsock 1.1 (example Windows 3.1)
+  (http://www.phekda.freeserve.co.uk/richdawe/lsck/lsck.htm)
+   OR
+- Wattcp-32 v2.2 dev.rel 6 or better
+   For use with a packet driver
+  (http://www.bgnett.no/~giva/)
+  (http://groups.yahoo.com/group/watt-32/)
+  (http://groups.yahoo.com/group/watt-32/files/v2.2/)
+)
+- bcd 1.03 (inlcude in this package)
+- gcc 2.95.2 is recommended
+- nasm 0.98 (or better)     (http://nasm.sourceforge.net/)
+
+compile:
+make
+make WATTCP=1 (to make a Wattcp-32 version)
+
+debug:
+when craching SRB2 will return eip
+type make asm, then you will have a 8 megs srb2.s (a assembler file)
+the you can find the faulting instruction and function
+
+------------------------------------------------------------------------
+
+Linux/SDL
+-----
+
+need:
+- tested with gcc 2.95 and 3.X.
+- SDL 1.2
+- SDL_mixer 1.2
+- ibogg and libvorbis (http://Xiph.org/)
+- nasm 0.98 (or better)(http://nasm.sourceforge.net/) only with 2.95, else add CC30=1
+
+compile
+make LINUX=1
+
+debug:
+gdb ?
+
+------------------------------------------------------------------------
+
+Win32
+-----
+
+need :
+- glide 3.x sdk (optional)  (http://www.3dfx.com)
+- directx6 sdk (or higher)  (http://www.micosoft.com/directx)
+- nasm 0.98 (or better)     (http://nasm.sourceforge.net/)
+- use src\win32\wLegacy.dsp
+- VC6 should also work with VC5, and VS.NET 200X
+
+debug:
+press on "step over" with the release version (there is some debug info
+on it). Then change the eip in the regster window when you will type
+enter the edi will go to the faulting instruction. don't forget that
+you can follow the stack for calls.
+You can also use trace with the debug version but add -win and -nomouse.
+
+------------------------------------------------------------------------
+
+Win32/minGW/SDL
+-----
+
+need:
+- tested with gcc 2.95 and 3.X.
+- can also use Dev-C++ 5.0 beta 9 (4.9.9.0) from http://www.bloodshed.net/dev/devcpp.html
+- SDL 1.2
+- SDL_mixer 1.2
+
+compile
+make minGW=1 SDL=1
+or use src\SDL\Win32SDL.dev with Dev-C++ 4.9.9.0 or later
+
+debug:
+gdb ?
+
+------------------------------------------------------------------------
+
+WinCE/SDL WIP
+-----
+
+need:
+- ActiveSync 3.8
+ http://www.microsoft.com/windowsmobile/downloads/activesync38.mspx
+
+- ActiveSync 3.7.1, if 3.8 isn't available for your language
+ http://www.microsoft.com/windowsmobile/downloads/activesync37.mspx
+
+- eMbedded Visual Tools 3.0 - 2002 Edition
+ http://www.microsoft.com/downloads/details.aspx?FamilyID=f663bf48-31ee-4cbe-aac5-0affd5fb27dd
+
+- Pocket PC 2000 SDK
+ http://www.microsoft.com/downloads/details.aspx?FamilyID=bb3f4d7b-de2a-4e1a-a175-26a68c301ac4
+
+- Pocket PC 2002 SDK (eMVT 3.0 2002 Ed. comes with this)
+ http://www.microsoft.com/downloads/details.aspx?FamilyID=2dbee84a-bd94-4167-b817-2b2e548b2e92
+
+- Pocket PC 2002 SDK Emulator Images (eMVT 3.0 2002 Ed. comes with this)
+ http://www.microsoft.com/downloads/details.aspx?FamilyID=25f4de97-ae80-477a-9df1-496b85b3d3e3
+
+- eMbedded Visual C++ 4.0
+ http://www.microsoft.com/downloads/details.aspx?familyid=1DACDB3D-50D1-41B2-A107-FA75AE960856
+
+- eMbedded Visual C++ 4.0 SP3 (Win CE 4.0-4.2)
+ http://www.microsoft.com/downloads/details.aspx?FamilyID=5bb36f3e-5b3d-419a-9610-2fe53815ae3b
+
+  OR
+
+- eMbedded Visual C++ 4.0 SP4 (No SH3 support,Win CE 4.0-5.0 support)
+ http://www.microsoft.com/downloads/details.aspx?FamilyID=4a4ed1f4-91d3-4dbe-986e-a812984318e5
+
+- eMbedded Visual C++ 4.0 Update 5625 (SP4 only)
+ http://www.microsoft.com/downloads/details.aspx?FamilyID=aa282a6d-6f57-436d-8c10-0ec02d94f5b1
+
+- Windows CE: Standard Software Development Kit
+ http://www.microsoft.com/downloads/details.aspx?familyid=a08f6991-16b0-4019-a174-0c40e6d25fe7
+
+- SDK for Windows Mobile 2003-based Pocket PCs
+ http://www.microsoft.com/downloads/details.aspx?FamilyId=9996B314-0364-4623-9EDE-0B5FBB133652
+
+- Emulator Images for Windows Mobile 2003 Second Edition software for Pocket PC
+ http://www.microsoft.com/downloads/details.aspx?familyid=5C53E3B5-F2A2-47D7-A41D-825FD68EBB6C
+
+- Microsoft Device Emulator 1.0 Community Preview
+ http://beta.microsoft.com Use Guest ID "MSDEVICE" to access the Community Preview website
+
+- Windows CE Utilities for Visual Studio .NET 2003 Add-on Pack 1.1
+  (if you also have VS 2003 installed, you need this to install Win CE 5.0 SDK, else no need)
+ http://www.microsoft.com/downloads/details.aspx?FamilyId=7EC99CA6-2095-4086-B0CC-7C6C39B28762
+
+- Windows CE 5.0: Standard Software Development Kit (eMC++ 4 SP4 only)
+ http://www.microsoft.com/downloads/details.aspx?FamilyID=fa1a3d66-3f61-4ddc-9510-ae450e2318c3
+
+- SDL 1.27 (use patch and zip in tools\SDL1.2.7_CE)
+
+compile
+use src\SDL\WinCE\SRB2CE.vcw
+
+debug:
+?
+
+
+2. Explanation of the code
+==========================
+
+ 2.1 The memory model (original) (z_zone.c) (by BP)
+ --------------------
+
+ SRB2 allocate a heap of 6/32/48 megs at begining and provide a Z_Malloc function
+ to allocate in this heap.
+
+   Z_Malloc( int size,int tag,void* user )
+
+    size is the size in byte
+    tag can be : PU_STATIC   allocated static (like malloc do)
+                             call Z_Free to free it
+                 PU_LEVEL    same as static but the zone is "tagged" with the
+                             tag PU_LEVEL, when calling
+                             Z_FreeTag (PU_LEVEL, PU_LEVEL) all zone tagged
+                             with PU_LEVEL are freed (at the end of the level)
+                 PU_CACHE    this one _can_ be freed automatiquely by one other
+                             call to Z_Malloc. the *user point to a pointer
+                             to this zone so when freed automatiquely the
+                             pointer is set to NULL so eatch time you use it
+                             you must check if the pointer is not NULL and
+                             reload it.
+
+ (...)
+
+ 2.2 Hardware Texture model (by BP)
+ --------------------------
+
+ Eatch texture/patch/flats/pic in SRB2 are converted to hardware texture at
+ runtime (the GlideMipmap_s structure (hw_data.h)). I will call hardware
+ texture a gr_texture so there is no confusion.
+
+ To remind you :
+  - Texture are set of patch and are associate to linedefs (walls) can be
+    upper, lower or middle texture. It can have hole on it.
+  - patch are sprites (the doom patch are run of vertical lines)
+  - flats are used for floors and ceiling of sectors and have size of 64x64
+    it can't have hole on it
+  - pic are new legacy format for picture, it can only handle plain texture
+    like flats it is now used for hud in full screen for the main picture
+    of legacy and for coronas (the format was extended to handle 32 bit color
+    or intensity + alpha, not all are implemented at this time)
+
+ Since patch, flat and pic are basic structure represented by only one lump in
+ the wad, the wad loader allocate for eatch lump a GlideMipmap_s (cache3Dfx)
+ and init data field to NULL. Since the data structure is allocated in
+ PU_3DFXCACHE (like PU_CACHE) the data will be initilised when needed
+ (hw_cache.c).
+
+ The GlideMipmap_s structures for textures are initialized on
+ HWR_PrepLevelCache (hw_cache.c) it is called in P_SetupLevel (load level)
+ the number of textures is computed with TEXTURE1, TEXTURE2 lumps since this
+ can be changed in runtime in SRB2 (load a wad while runing) it must be
+ reallocated. Well, at this time it is realloceted at eatch level start. We
+ can do better, since numtextures change only when a wad is loaded.
+
+ The 3dfx driver use glide3, it load gr_texture in gr_texture memory of the
+ card in fifo order when there is no more place it remove the first gr_texture,
+ the downloaded field of GlideMipmap_s go to false and when needed it is
+ reloaded in gr_texture memory. In OpenGl, since OpenGl keep texture in there
+ own memory and handle gr_texture memory of the card we no more need to
+ redownload it but if we not free time to time gr_texture memory in opengl,
+ it will get alot of memory, so the gr_texture memory is cleared at eatch
+ new level (same time of texture reallocation). Opengl and 3dfx link the
+ loaded gr_texture with the nextmipmap field of GlideMipmap_s so before clear
+ textures of the heap we MUST free gr_texture memory of OpenGl or 3dfx !
+
+ SRB2 can also draw patch with a differant colormap (thanks to Hurdler).
+ When needed it create the same gr_texture but just with a differant colormap.
+ This one is linked with the original in the GlideMipmap_s with the
+ nextcolormap field.
+
+ So when a polygone with a gr_texture must be drawn, first we check if the
+ gr_textures is not allready loaded in hadware memory (downloaded field) if
+ not then we check if gr_texture data is there (not grabbed by z_malloc
+ function) if not we must recompute it eatch type of gr_texture (texture,
+ patch, flat, pic have there own methode) the we can send the gr_texture
+ to 3dfx or OpenGl.

libs/gettext/bin32/autopoint

@@ -0,0 +1,717 @@
+#! /bin/sh
+#
+# Copyright (C) 2002-2010 Free Software Foundation, Inc.
+#
+# This program is free software: you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 3 of the License, or
+# (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program.  If not, see <http://www.gnu.org/licenses/>.
+#
+
+# This file is meant for authors, maintainers, co-maintainers or installers
+# of packages which are internationalized with the help of GNU gettext.  For
+# further information how to use it consult the GNU gettext manual.
+
+progname=$0
+package=gettext-tools
+version=0.18.1
+
+# Set variables
+# - gettext_dir     directory where the sources are stored.
+prefix="/usr/local/i686-w64-mingw32/stow/gettext-0.18.1.1"
+datarootdir="${prefix}/share"
+gettext_dir="${datarootdir}/gettext"
+
+# func_tmpdir
+# creates a temporary directory.
+# Sets variable
+# - tmp             pathname of freshly created temporary directory
+func_tmpdir ()
+{
+  # Use the environment variable TMPDIR, falling back to /tmp. This allows
+  # users to specify a different temporary directory, for example, if their
+  # /tmp is filled up or too small.
+  : ${TMPDIR=/tmp}
+  {
+    # Use the mktemp program if available. If not available, hide the error
+    # message.
+    tmp=`(umask 077 && mktemp -d "$TMPDIR/gtXXXXXX") 2>/dev/null` &&
+    test -n "$tmp" && test -d "$tmp"
+  } ||
+  {
+    # Use a simple mkdir command. It is guaranteed to fail if the directory
+    # already exists.  $RANDOM is bash specific and expands to empty in shells
+    # other than bash, ksh and zsh.  Its use does not increase security;
+    # rather, it minimizes the probability of failure in a very cluttered /tmp
+    # directory.
+    tmp=$TMPDIR/gt$$-$RANDOM
+    (umask 077 && mkdir "$tmp")
+  } ||
+  {
+    echo "$0: cannot create a temporary directory in $TMPDIR" >&2
+    { (exit 1); exit 1; }
+  }
+}
+
+# Support for relocatability.
+func_find_curr_installdir ()
+{
+  # Determine curr_installdir, even taking into account symlinks.
+  curr_executable="$0"
+  case "$curr_executable" in
+    */* | *\\*) ;;
+    *) # Need to look in the PATH.
+      if test "${PATH_SEPARATOR+set}" != set; then
+        func_tmpdir
+        { echo "#! /bin/sh"; echo "exit 0"; } > "$tmp"/conf.sh
+        chmod +x "$tmp"/conf.sh
+        if (PATH="/nonexistent;$tmp"; conf.sh) >/dev/null 2>&1; then
+          PATH_SEPARATOR=';'
+        else
+          PATH_SEPARATOR=:
+        fi
+        rm -rf "$tmp"
+      fi
+      save_IFS="$IFS"; IFS="$PATH_SEPARATOR"
+      for dir in $PATH; do
+        IFS="$save_IFS"
+        test -z "$dir" && dir=.
+        for exec_ext in ''; do
+          if test -f "$dir/$curr_executable$exec_ext"; then
+            curr_executable="$dir/$curr_executable$exec_ext"
+            break 2
+          fi
+        done
+      done
+      IFS="$save_IFS"
+      ;;
+  esac
+  # Make absolute.
+  case "$curr_executable" in
+    /* | ?:/* | ?:\\*) ;;
+    *) curr_executable=`pwd`/"$curr_executable" ;;
+  esac
+  # Resolve symlinks.
+  sed_dirname='s,/[^/]*$,,'
+  sed_linkdest='s,^.* -> \(.*\),\1,p'
+  while : ; do
+    lsline=`LC_ALL=C ls -l "$curr_executable"`
+    case "$lsline" in
+      *" -> "*)
+        linkdest=`echo "$lsline" | sed -n -e "$sed_linkdest"`
+        case "$linkdest" in
+          /* | ?:/* | ?:\\*) curr_executable="$linkdest" ;;
+          *) curr_executable=`echo "$curr_executable" | sed -e "$sed_dirname"`/"$linkdest" ;;
+        esac ;;
+      *) break ;;
+    esac
+  done
+  curr_installdir=`echo "$curr_executable" | sed -e 's,/[^/]*$,,'`
+  # Canonicalize.
+  curr_installdir=`cd "$curr_installdir" && pwd`
+}
+func_find_prefixes ()
+{
+  # Compute the original/current installation prefixes by stripping the
+  # trailing directories off the original/current installation directories.
+  orig_installprefix="$orig_installdir"
+  curr_installprefix="$curr_installdir"
+  while true; do
+    orig_last=`echo "$orig_installprefix" | sed -n -e 's,^.*/\([^/]*\)$,\1,p'`
+    curr_last=`echo "$curr_installprefix" | sed -n -e 's,^.*/\([^/]*\)$,\1,p'`
+    if test -z "$orig_last" || test -z "$curr_last"; then
+      break
+    fi
+    if test "$orig_last" != "$curr_last"; then
+      break
+    fi
+    orig_installprefix=`echo "$orig_installprefix" | sed -e 's,/[^/]*$,,'`
+    curr_installprefix=`echo "$curr_installprefix" | sed -e 's,/[^/]*$,,'`
+  done
+}
+if test "no" = yes; then
+  exec_prefix="${prefix}"
+  bindir="${exec_prefix}/bin"
+  orig_installdir="$bindir" # see Makefile.am's *_SCRIPTS variables
+  func_find_curr_installdir # determine curr_installdir
+  func_find_prefixes
+  # Relocate the directory variables that we use.
+  gettext_dir=`echo "$gettext_dir/" | sed -e "s%^${orig_installprefix}/%${curr_installprefix}/%" | sed -e 's,/$,,'`
+fi
+
+# func_usage
+# outputs to stdout the --help usage message.
+func_usage ()
+{
+  echo "\
+Usage: autopoint [OPTION]...
+
+Copies standard gettext infrastructure files into a source package.
+
+Options:
+      --help           print this help and exit
+      --version        print version information and exit
+  -f, --force          force overwriting of files that already exist
+  -n, --dry-run        print modifications but don't perform them"
+#  echo "\
+#  -V version           copy the infrastructure of the specified gettext version
+#                         (dangerous)"
+  echo "
+Report bugs to <bug-gnu-gettext@gnu.org>."
+}
+
+# func_version
+# outputs to stdout the --version message.
+func_version ()
+{
+  echo "$progname (GNU $package) $version"
+  echo "Uses a versions archive in git format."
+  echo "Copyright (C) 2002-2010 Free Software Foundation, Inc.
+License GPLv3+: GNU GPL version 3 or later <http://gnu.org/licenses/gpl.html>
+This is free software: you are free to change and redistribute it.
+There is NO WARRANTY, to the extent permitted by law."
+  echo "Written by" "Bruno Haible"
+}
+
+# func_fatal_error message
+# outputs to stderr a fatal error message, and terminates the program.
+func_fatal_error ()
+{
+  echo "autopoint: *** $1" 1>&2
+  echo "autopoint: *** Stop." 1>&2
+  exit 1
+}
+
+# Command-line option processing.
+# Removes the OPTIONS from the arguments. Sets the variables:
+# - force           yes if --force was given, empty otherwise
+# - ver             gettext version if -V was given, empty otherwise
+# - doit            false if --dry-run was given, : otherwise
+{
+  force=
+  ver=
+  doit=:
+
+  while test $# -gt 0; do
+    case "$1" in
+      -n | --dry-run | --dry-ru | --dry-r | --dry- | --dry | --dr | --d )
+        shift
+        doit=false ;;
+      -f | --force | --forc | --for | --fo | --f )
+        shift
+        force=yes ;;
+      --help | --hel | --he | --h )
+        func_usage; exit 0 ;;
+#      -V ) # Some people put a space between -V and the version number.
+#        shift
+#        if test $# = 0; then
+#          func_usage 1>&2
+#          exit 1
+#        fi
+#        ver=$1;
+#        shift ;;
+#      -V*) # Some people omit the space between -V and the version number.
+#        ver=`echo "X$1" | sed -e 's/^X-V//'`
+#        shift ;;
+      --version | --versio | --versi | --vers | --ver | --ve | --v )
+        func_version
+        exit 0 ;;
+      -- ) # Stop option prcessing
+        shift; break ;;
+      -* )
+        echo "autopoint: unknown option $1" 1>&2
+        echo "Try 'autopoint --help' for more information." 1>&2
+        exit 1 ;;
+      * )
+        break ;;
+    esac
+  done
+}
+
+# Command-line argument processing.
+# Analyzes the remaining arguments.
+{
+  if test $# -gt 0; then
+    func_usage 1>&2
+    exit 1
+  fi
+}
+
+srcdir=`pwd`
+# The current directory is now $srcdir.
+
+# Check integrity of package: A configure.in/ac must be present. Sets variable
+# - configure_in    name of configure.in/ac file.
+if test -f configure.in; then
+  configure_in=configure.in
+else
+  if test -f configure.ac; then
+    configure_in=configure.ac
+  else
+    # KDE specific convention: configure.in.in
+    if test -f configure.in.in; then
+      configure_in=configure.in.in
+    else
+      func_fatal_error "Missing configure.in or configure.ac, please cd to your package first."
+    fi
+  fi
+fi
+
+# Check whether the -V option and the version number in configure.in match.
+# At least one of the two must be given. If both are given, they must agree.
+sed_extract_AM_GNU_GETTEXT_VERSION_argument='s/^AM_GNU_GETTEXT_VERSION(\([^()]*\)).*$/\1/'
+sed_remove_outer_brackets='s/^\[\(.*\)\]$/\1/'
+xver=`cat "$configure_in" | grep '^AM_GNU_GETTEXT_VERSION(' | sed -n -e "$sed_extract_AM_GNU_GETTEXT_VERSION_argument"p | sed -e "$sed_remove_outer_brackets" | sed -e 1q`
+if test -z "$xver" && test -f intl/VERSION; then
+  xver=`cat intl/VERSION | LC_ALL=C sed -n -e 's/^.*gettext-\([-+_.0-9A-Za-z]*\).*$/\1/p'`
+fi
+if test -n "$xver"; then
+  if test -n "$ver"; then
+    if test "X$ver" != "X$xver"; then
+      func_fatal_error "Version mismatch: specified -V $ver but the package uses gettext version $xver"
+    fi
+  else
+    ver="$xver"
+  fi
+else
+  if test -z "$ver"; then
+    func_fatal_error "Missing version: please specify in $configure_in through a line 'AM_GNU_GETTEXT_VERSION(x.yy.zz)' the gettext version the package is using"
+  fi
+fi
+
+# Check whether the version number is supported.
+case "$ver" in
+  0.10.35 | 0.10.36 | 0.10.37 | 0.10.38 | 0.10.39 | 0.10.40 | \
+  0.11 | 0.11.1 | 0.11.2 | 0.11.3 | 0.11.4 | 0.11.5 | \
+  0.12 | 0.12.1 | \
+  0.13 | 0.13.1 | \
+  0.14 | 0.14.1 | 0.14.2 | 0.14.3 | 0.14.4 | 0.14.5 | 0.14.6 | \
+  0.15 | \
+  0.16 | 0.16.1 | \
+  0.17 | \
+  0.18 | 0.18.1 )
+    ;;
+  *)
+    func_fatal_error "The AM_GNU_GETTEXT_VERSION declaration in your $configure_in
+               file requires the infrastructure from gettext-$ver but this version
+               is older. Please upgrade to gettext-$ver or newer."
+    ;;
+esac
+
+# Check in which directory config.rpath, mkinstalldirs etc. belong.
+auxdir=`cat "$configure_in" | grep '^AC_CONFIG_AUX_DIR' | sed -n -e 's/AC_CONFIG_AUX_DIR(\([^()]*\))/\1/p' | sed -e 's/^\[\(.*\)\]$/\1/' | sed -e 1q`
+if test -n "$auxdir"; then
+  auxdir="$auxdir/"
+fi
+
+# Check in which directory the *.m4 macros belong.
+m4dir=m4
+if test -f Makefile.am; then
+  # A package using automake.
+  # Extract the macro directory name from Makefile.am.
+  aclocal_amflags=`grep '^ACLOCAL_AMFLAGS[ 	]*=' Makefile.am | sed -e 's/^ACLOCAL_AMFLAGS[ 	]*=\(.*\)$/\1/'`
+  m4dir_is_next=
+  for arg in $aclocal_amflags; do
+    if test -n "$m4dir_is_next"; then
+      m4dir="$arg"
+      break
+    else
+      if test "X$arg" = "X-I"; then
+        m4dir_is_next=yes
+      else
+        m4dir_is_next=
+      fi
+    fi
+  done
+fi
+
+# Check whether to omit the intl/ directory.
+omitintl=`cat "$configure_in" | grep '^AM_GNU_GETTEXT' | sed -n -e 's/^AM_GNU_GETTEXT(\([^(),]*\).*$/\1/p' | sed -e 's/^\[\(.*\)\]$/\1/' | sed -e 1q`
+omitintl=`if test 'external' = "$omitintl"; then echo yes; fi`
+
+# Check in which directory or directories the po/* infrastructure belongs.
+sed_extract_config_files='s,#.*$,,
+s,^dnl .*$,,
+s, dnl .*$,,
+/AC_CONFIG_FILES(/ {
+  ta
+  :a
+    s/)/)/
+    tb
+    s/\\$//
+    N
+    ba
+  :b
+  s,^.*AC_CONFIG_FILES([[ ]*\([^]"$`\\)]*\).*$,\1,p
+}'
+configfiles=`cat "$configure_in" | sed -n -e "$sed_extract_config_files"`
+# PO directories have a Makefile.in generated from Makefile.in.in.
+# Treat a directory as a PO directory if and only if it has a
+# POTFILES.in file. This allows packages to have multiple PO
+# directories under different names or in different locations.
+sed_remove_Makefile_in='s,/Makefile\.in$,,'
+podirs=`for f in $configfiles; do case "$f" in */Makefile.in) echo $f;; esac; done | sed -e "$sed_remove_Makefile_in"`
+if test -z "$podirs"; then
+  # If we cannot get the list of PO directories from configure.ac, assume the
+  # common default.
+  podirs="po"
+fi
+
+# Set up a temporary checkout directory.
+# Set variables
+# - work_dir        directory containing the temporary checkout
+work_dir=tmpwrk$$
+mkdir "$work_dir" || {
+  if test -d "$work_dir"; then
+    func_fatal_error "directory $work_dir already exists"
+  else
+    func_fatal_error "cannot create directory $work_dir"
+  fi
+}
+
+# We support three archive formats.
+#
+# Format | Size (KiB) for gettext-0.17 | Extra tools needed |
+# -------+-----------------------------+--------------------+
+#  dir   |            3000             |         --         |
+#  cvs   |             356             |         cvs        |
+#  git   |             484             |         git        |
+# -------+-----------------------------+--------------------+
+
+case "git" in
+  dir)
+    # The archive of different versions is very large, but using it does not
+    # require special tools.
+    gzip -d -c < "$gettext_dir/archive.dir.tar.gz" | (cd "$work_dir" && tar xf - "gettext-$ver")
+    if test `find "$work_dir" -type f -print | wc -l` = 0; then
+      rm -rf "$work_dir"
+      func_fatal_error "infrastructure files for version $ver not found; this is autopoint from GNU $package $version"
+    fi
+    mv "$work_dir/gettext-$ver" "$work_dir/archive"
+    ;;
+
+  cvs)
+    # We distributed the many different versions of the files in a CVS
+    # repository. This guaranteed a good compression rate:
+    #
+    #   Including version    size in KB of
+    #                       "du autopoint-files/archive"
+    #      0.10.35                  240
+    #      0.10.36                  428
+    #      0.10.37                  436
+    #      0.10.38                  488
+    #      0.10.39                  500
+    #      0.10.40                  528
+    #      0.11                     720
+    #      0.11.1                   740
+    #      0.11.2                   748
+    #      0.11.3                   804
+    #      0.11.4                   864
+    #      0.11.5                   880
+    #      0.12                    1032
+    #      0.12.1                  1032
+    #      0.13                    1220
+    #      0.13.1                  1236
+    #      0.14                    1296
+    #      0.14.1                  1300
+    #      0.14.2                  1420
+    #      0.14.3                  1428
+    #      0.14.4                  1464
+    #      0.14.5                  1508
+    #      0.14.6                  1580
+    #      0.15                    1760
+    #      0.16                    1808
+    #      0.16.1                  1812
+    #      0.17                    2128
+    #      0.18                    2656
+    #
+    # The requirement that the user must have the CVS program available is not
+    # a severe restrictions, because most of the people who use autopoint are
+    # users of CVS.
+    #
+    # But the CVS format is now deprecated, because "cvs init" does not work in
+    # all circumstances
+    # (see <http://lists.gnu.org/archive/html/bug-cvs/2010-05/msg00003.html>)
+    # and we are not allowed to distribute the cvs infrastructure files
+    # ourselves
+    # (see <http://lists.gnu.org/archive/html/bug-cvs/2010-06/msg00011.html>).
+    #
+    # Check availability of the CVS program.
+    (cvs -v) >/dev/null 2>/dev/null || func_fatal_error "cvs program not found"
+
+    # Set up a temporary CVS repository.
+    # We need the temporary CVS repository because any checkout needs write
+    # access to the CVSROOT/history file, so it cannot be under $gettext_dir.
+    # We need the temporary checkout directory because when --force was not
+    # given, we need to compare the existing files with the checked out ones.
+    # Set variables
+    # - cvs_dir         directory containing the temporary repository
+    cvs_dir=tmpcvs$$
+    # Use an umask of 077, to avoid attacks that work by overwriting files in
+    # the "$CVSROOT"/CVSROOT directory.
+    (umask 077 && mkdir "$cvs_dir") || {
+      if test -d "$cvs_dir"; then
+        func_fatal_error "directory $cvs_dir already exists"
+      else
+        func_fatal_error "cannot create directory $cvs_dir"
+      fi
+    }
+    CVSROOT="$srcdir/$cvs_dir"
+    unset CVS_CLIENT_LOG
+    unset CVS_CLIENT_PORT
+    unset CVS_IGNORE_REMOTE_ROOT
+    unset CVS_LOCAL_BRANCH_NUM
+    unset CVS_NOBASES
+    unset CVS_PASSFILE
+    unset CVS_PASSWORD
+    unset CVS_PROXY_PORT
+    unset CVS_RCMD_PORT
+    unset CVS_RSH
+    unset CVS_SERVER
+    unset CVS_SERVER_SLEEP
+    CVS_SIGN_COMMITS=
+    export CVS_SIGN_COMMITS
+    unset CVS_SSH
+    unset CVS_VERIFY_CHECKOUTS
+    unset CVS_VERIFY_TEMPLATE
+    unset CVSIGNORE
+    unset CVSREAD
+    unset CVSREADONLYFS
+    unset CVSUMASK
+    unset CVSWRAPPERS
+
+    # Need to pass -d "$CVSROOT", because there may be a CVS directory in the
+    # current directory.
+    cvs -d "$CVSROOT" init
+    gzip -d -c < "$gettext_dir/archive.cvs.tar.gz" | (cd "$cvs_dir" && tar xf -)
+
+    cd "$work_dir"
+    cvsver=gettext-`echo "$ver" | sed -e 's/\./_/g'`
+    (cvs -d "$CVSROOT" checkout -r"$cvsver" archive > /dev/null) 2>&1 | grep -v '^cvs checkout: Updating'
+    find archive -name CVS -type d -print | xargs rm -rf
+    cd ..
+    rm -rf "$cvs_dir"
+    # Check that really all CVS directories are gone, otherwise we would overwrite
+    # the contents of the user's CVS directories.
+    if test `find $work_dir/archive -name CVS -type d -print | wc -l` != 0; then
+      rm -rf "$work_dir"
+      func_fatal_error "failed to remove all CVS subdirectories"
+    fi
+    if test `find $work_dir/archive -type f -print | wc -l` = 0; then
+      rm -rf "$work_dir"
+      func_fatal_error "infrastructure files for version $ver not found; this is autopoint from GNU $package $version"
+    fi
+    ;;
+
+  git)
+    # Check availability of the git program.
+    (git --version) >/dev/null 2>/dev/null || func_fatal_error "git program not found"
+    mkdir "$work_dir/archive"
+    gzip -d -c < "$gettext_dir/archive.git.tar.gz" | (cd "$work_dir/archive" && tar xf -)
+    (cd "$work_dir/archive" && git checkout -q "gettext-$ver") || {
+      rm -rf "$work_dir"
+      func_fatal_error "infrastructure files for version $ver not found; this is autopoint from GNU $package $version"
+    }
+    (cd "$work_dir/archive" && rm -rf .git .gitignore)
+    ;;
+esac
+
+# func_destfile file
+# determines the destination file, relative to the package's top level
+# directory, for a given file name, relative to archive.
+# Sets variables
+# - destfile        relative destination file name, or
+#                   empty if the file shall be omitted
+# - sharedowner     yes if the file is not only owned by GNU gettext but may
+#                   be installed by automake or other tools, otherwise empty
+# - allpodirs       yes if the file is to be installed in every dir in $podirs
+func_destfile ()
+{
+  # There are five categories of files:
+  # ABOUT_NLS -> top level directory
+  # config.rpath mkinstalldirs -> $auxdir
+  # m4/* -> $m4dir/
+  # intl/* -> intl/
+  # po/* -> 
+  sharedowner=
+  allpodirs=
+  case `echo "$1" | sed -e 's,[^/]*$,,'` in
+    "" )
+      case "$1" in
+        config.rpath ) destfile="$auxdir$1" ;;
+        mkinstalldirs ) destfile="$auxdir$1" sharedowner=yes ;;
+        * ) destfile="$1" ;;
+      esac
+      ;;
+    m4/ ) destfile=`echo "$1" | sed -e "s,^m4/,$m4dir/,"` ;;
+    intl/ ) if test -n "$omitintl"; then destfile=""; else destfile="$1"; fi ;;
+    po/ ) destfile=`echo "$1" | sed -e "s,^po/,,"` allpodirs=yes ;;
+    * ) destfile="$1" ;;
+  esac
+}
+
+# func_compare existingfile gettextfile
+# compares the existing file and the file from gettext, and decides whether the
+# existing file should be overwritten with the file from gettext. Returns 0 if
+# it should be overwritten, or 1 if it should be skipped.
+sed_extract_serial='s/^#.* serial \([^ ]*\).*/\1/p
+1q'
+func_compare ()
+{
+  if cmp -s "$1" "$2"; then
+    false
+  else
+    case "$2" in
+      *.m4)
+        # For interoperability with gnulib. gnulib often has newer versions of
+        # the *.m4 files than the latest gettext release. Don't overwrite a
+        # newer version from gnulib with an older version from the gettext
+        # release. The version can be retrieved from the first line, which
+        # looks like this:   # file.m4 serial NN ...
+        existing_serial=`sed -n -e "$sed_extract_serial" < "$1"`
+        gettext_serial=`sed -n -e "$sed_extract_serial" < "$2"`
+        if test -n "$existing_serial" && test -n "$gettext_serial" \
+           && test "$existing_serial" -ge "$gettext_serial" 2> /dev/null; then
+          false
+        else
+          true
+        fi
+        ;;
+      *)
+        true
+        ;;
+    esac
+  fi
+}
+
+# If some files have been locally modified and we have not been requested
+# to overwrite them, then bail out. This is better than leaving a source
+# package around where half of the files are locally modified and half are
+# original - too great risk of version mismatch.
+if test -z "$force"; then
+  mismatch=
+  func_tmpdir
+  mismatchfile="$tmp"/autopoint.diff
+  for file in `find "$work_dir/archive" -type f -print | sed -e "s,^$work_dir/archive/,," | LC_ALL=C sort`; do
+    func_destfile "$file"
+    if test -n "$destfile"; then
+      func_compare_to_destfile ()
+      {
+        finaldestfile="$1"
+        if test -f "$finaldestfile"; then
+          if func_compare "$finaldestfile" "$work_dir/archive/$file"; then
+            if test -n "$sharedowner"; then
+              echo "autopoint: warning: File $finaldestfile has been locally modified." 1>&2
+            else
+              echo "autopoint: File $finaldestfile has been locally modified." 1>&2
+              mismatch=yes
+              diff -c "$work_dir/archive/$file" "$finaldestfile" | sed -e "1s,$work_dir/archive/,," >> "$mismatchfile"
+            fi
+          fi
+        fi
+      }
+      if test -n "$allpodirs"; then
+        for dir in $podirs; do
+          func_compare_to_destfile "$dir/$destfile"
+        done
+      else
+        func_compare_to_destfile "$destfile"
+      fi
+    fi
+  done
+  if test -n "$mismatch"; then
+    rm -rf "$work_dir"
+    func_fatal_error "Some files have been locally modified. Not overwriting them because --force has not been specified. For your convenience, you find the local modifications in the file '$mismatchfile'."
+  fi
+  rm -rf "$tmp"
+fi
+
+# func_mkdir_for to
+# ensures the directory that would the given file exists.
+# 'to' is a relative pathname, relative to the current directory.
+func_mkdir_for ()
+{
+  base=`echo "$1" | sed -e 's,/[^/]*$,,'`
+  if test "X$base" != "X$1" && test -n "$base"; then
+    func_mkdir_for "$base"
+    # Recompute base. It was clobbered by the recursive call.
+    base=`echo "$1" | sed -e 's,/[^/]*$,,'`
+    test -d "$base" || { echo "Creating directory $base"; mkdir "$base"; }
+  fi
+}
+
+# func_copy from to
+# copies a file.
+# 'from' is a relative pathname, relative to the current directory.
+# 'to' is a relative pathname, relative to the current directory.
+func_copy ()
+{
+  if $doit; then
+    func_mkdir_for "$2"
+    rm -f "$2"
+    echo "Copying file $2"
+    cp "$1" "$2"
+  else
+    echo "Copy file $2"
+  fi
+}
+
+# func_backup to
+# makes a backup of a file that is about to be overwritten or replaced.
+# 'to' is a relative pathname, relative to the current directory.
+func_backup ()
+{
+  if $doit; then
+    if test -f "$1"; then
+      rm -f "$1~"
+      cp -p "$1" "$1~"
+    fi
+  fi
+}
+
+# Now copy the files.
+for file in `find "$work_dir/archive" -type f -print | sed -e "s,^$work_dir/archive/,," | LC_ALL=C sort`; do
+  func_destfile "$file"
+  if test -n "$destfile"; then
+    func_copy_to_destfile ()
+    {
+      finaldestfile="$1"
+      mustcopy=
+      if test -f "$finaldestfile"; then
+        if func_compare "$finaldestfile" "$work_dir/archive/$file"; then
+          if test -n "$force"; then
+            # Overwrite locally modified file.
+            mustcopy=yes
+          fi
+          # If --force is not specified, don't overwrite locally modified files
+          # for which GNU gettext is a shared owner.
+        fi
+      else
+        mustcopy=yes
+      fi
+      if test -n "$mustcopy"; then
+        func_backup "$finaldestfile"
+        func_copy "$work_dir/archive/$file" "$finaldestfile"
+      fi
+    }
+    if test -n "$allpodirs"; then
+      for dir in $podirs; do
+        func_copy_to_destfile "$dir/$destfile"
+      done
+    else
+      func_copy_to_destfile "$destfile"
+    fi
+  fi
+done
+
+# That's it.
+rm -rf "$work_dir"
+exit 0

libs/gettext/bin32/gettext.sh

@@ -0,0 +1,123 @@
+#! /bin/sh
+#
+# Copyright (C) 2003, 2005-2007 Free Software Foundation, Inc.
+#
+# This program is free software; you can redistribute it and/or modify it
+# under the terms of the GNU Library General Public License as published
+# by the Free Software Foundation; either version 2, or (at your option)
+# any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU Library General Public
+# License along with this program; if not, write to the Free Software
+# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301,
+# USA.
+#
+
+# Find a way to echo strings without interpreting backslash.
+if test "X`(echo '\t') 2>/dev/null`" = 'X\t'; then
+  echo='echo'
+else
+  if test "X`(printf '%s\n' '\t') 2>/dev/null`" = 'X\t'; then
+    echo='printf %s\n'
+  else
+    echo_func () {
+      cat <<EOT
+$*
+EOT
+    }
+    echo='echo_func'
+  fi
+fi
+
+# This script is primarily a shell function library. In order for
+# ". gettext.sh" to find it, we install it in $PREFIX/bin (that is usually
+# contained in $PATH), rather than in some other location such as
+# $PREFIX/share/sh-scripts or $PREFIX/share/gettext. In order to not violate
+# the Filesystem Hierarchy Standard when doing so, this script is executable.
+# Therefore it needs to support the standard --help and --version.
+if test -z "$ZSH_VERSION"; then
+  # zsh is not POSIX compliant: By default, while ". gettext.sh" is executed,
+  # it sets $0 to "gettext.sh", defeating the purpose of this test. But
+  # fortunately we know that when running under zsh, this script is always
+  # being sourced, not executed, because hardly anyone is crazy enough to
+  # install zsh as /bin/sh.
+  case "$0" in
+    gettext.sh | */gettext.sh | *\\gettext.sh)
+      progname=$0
+      package=gettext-runtime
+      version=0.18.1
+      # func_usage
+      # outputs to stdout the --help usage message.
+      func_usage ()
+      {
+        echo "GNU gettext shell script function library version $version"
+        echo "Usage: . gettext.sh"
+      }
+      # func_version
+      # outputs to stdout the --version message.
+      func_version ()
+      {
+        echo "$progname (GNU $package) $version"
+        echo "Copyright (C) 2003-2007 Free Software Foundation, Inc.
+License GPLv2+: GNU GPL version 2 or later <http://gnu.org/licenses/gpl.html>
+This is free software: you are free to change and redistribute it.
+There is NO WARRANTY, to the extent permitted by law."
+        echo "Written by" "Bruno Haible"
+      }
+      if test $# = 1; then
+        case "$1" in
+          --help | --hel | --he | --h )
+            func_usage; exit 0 ;;
+          --version | --versio | --versi | --vers | --ver | --ve | --v )
+            func_version; exit 0 ;;
+        esac
+      fi
+      func_usage 1>&2
+      exit 1
+      ;;
+  esac
+fi
+
+# eval_gettext MSGID
+# looks up the translation of MSGID and substitutes shell variables in the
+# result.
+eval_gettext () {
+  gettext "$1" | (export PATH `envsubst --variables "$1"`; envsubst "$1")
+}
+
+# eval_ngettext MSGID MSGID-PLURAL COUNT
+# looks up the translation of MSGID / MSGID-PLURAL for COUNT and substitutes
+# shell variables in the result.
+eval_ngettext () {
+  ngettext "$1" "$2" "$3" | (export PATH `envsubst --variables "$1 $2"`; envsubst "$1 $2")
+}
+
+# Note: This use of envsubst is much safer than using the shell built-in 'eval'
+# would be.
+# 1) The security problem with Chinese translations that happen to use a
+#    character such as \xe0\x60 is avoided.
+# 2) The security problem with malevolent translators who put in command lists
+#    like "$(...)" or "`...`" is avoided.
+# 3) The translations can only refer to shell variables that are already
+#    mentioned in MSGID or MSGID-PLURAL.
+#
+# Note: "export PATH" above is a dummy; this is for the case when
+# `envsubst --variables ...` returns nothing.
+#
+# Note: In eval_ngettext above, "$1 $2" means a string whose variables set is
+# the union of the variables set of "$1" and "$2".
+#
+# Note: The minimal use of backquote above ensures that trailing newlines are
+# not dropped, not from the gettext invocation and not from the value of any
+# shell variable.
+#
+# Note: Field splitting on the `envsubst --variables ...` result is desired,
+# since envsubst outputs the variables, separated by newlines. Pathname
+# wildcard expansion or tilde expansion has no effect here, since the words
+# output by "envsubst --variables ..." consist solely of alphanumeric
+# characters and underscore.

libs/gettext/bin64/autopoint

@@ -0,0 +1,717 @@
+#! /bin/sh
+#
+# Copyright (C) 2002-2010 Free Software Foundation, Inc.
+#
+# This program is free software: you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 3 of the License, or
+# (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program.  If not, see <http://www.gnu.org/licenses/>.
+#
+
+# This file is meant for authors, maintainers, co-maintainers or installers
+# of packages which are internationalized with the help of GNU gettext.  For
+# further information how to use it consult the GNU gettext manual.
+
+progname=$0
+package=gettext-tools
+version=0.18.1
+
+# Set variables
+# - gettext_dir     directory where the sources are stored.
+prefix="/usr/local/x86_64-w64-mingw32/stow/gettext-0.18.1.1"
+datarootdir="${prefix}/share"
+gettext_dir="${datarootdir}/gettext"
+
+# func_tmpdir
+# creates a temporary directory.
+# Sets variable
+# - tmp             pathname of freshly created temporary directory
+func_tmpdir ()
+{
+  # Use the environment variable TMPDIR, falling back to /tmp. This allows
+  # users to specify a different temporary directory, for example, if their
+  # /tmp is filled up or too small.
+  : ${TMPDIR=/tmp}
+  {
+    # Use the mktemp program if available. If not available, hide the error
+    # message.
+    tmp=`(umask 077 && mktemp -d "$TMPDIR/gtXXXXXX") 2>/dev/null` &&
+    test -n "$tmp" && test -d "$tmp"
+  } ||
+  {
+    # Use a simple mkdir command. It is guaranteed to fail if the directory
+    # already exists.  $RANDOM is bash specific and expands to empty in shells
+    # other than bash, ksh and zsh.  Its use does not increase security;
+    # rather, it minimizes the probability of failure in a very cluttered /tmp
+    # directory.
+    tmp=$TMPDIR/gt$$-$RANDOM
+    (umask 077 && mkdir "$tmp")
+  } ||
+  {
+    echo "$0: cannot create a temporary directory in $TMPDIR" >&2
+    { (exit 1); exit 1; }
+  }
+}
+
+# Support for relocatability.
+func_find_curr_installdir ()
+{
+  # Determine curr_installdir, even taking into account symlinks.
+  curr_executable="$0"
+  case "$curr_executable" in
+    */* | *\\*) ;;
+    *) # Need to look in the PATH.
+      if test "${PATH_SEPARATOR+set}" != set; then
+        func_tmpdir
+        { echo "#! /bin/sh"; echo "exit 0"; } > "$tmp"/conf.sh
+        chmod +x "$tmp"/conf.sh
+        if (PATH="/nonexistent;$tmp"; conf.sh) >/dev/null 2>&1; then
+          PATH_SEPARATOR=';'
+        else
+          PATH_SEPARATOR=:
+        fi
+        rm -rf "$tmp"
+      fi
+      save_IFS="$IFS"; IFS="$PATH_SEPARATOR"
+      for dir in $PATH; do
+        IFS="$save_IFS"
+        test -z "$dir" && dir=.
+        for exec_ext in ''; do
+          if test -f "$dir/$curr_executable$exec_ext"; then
+            curr_executable="$dir/$curr_executable$exec_ext"
+            break 2
+          fi
+        done
+      done
+      IFS="$save_IFS"
+      ;;
+  esac
+  # Make absolute.
+  case "$curr_executable" in
+    /* | ?:/* | ?:\\*) ;;
+    *) curr_executable=`pwd`/"$curr_executable" ;;
+  esac
+  # Resolve symlinks.
+  sed_dirname='s,/[^/]*$,,'
+  sed_linkdest='s,^.* -> \(.*\),\1,p'
+  while : ; do
+    lsline=`LC_ALL=C ls -l "$curr_executable"`
+    case "$lsline" in
+      *" -> "*)
+        linkdest=`echo "$lsline" | sed -n -e "$sed_linkdest"`
+        case "$linkdest" in
+          /* | ?:/* | ?:\\*) curr_executable="$linkdest" ;;
+          *) curr_executable=`echo "$curr_executable" | sed -e "$sed_dirname"`/"$linkdest" ;;
+        esac ;;
+      *) break ;;
+    esac
+  done
+  curr_installdir=`echo "$curr_executable" | sed -e 's,/[^/]*$,,'`
+  # Canonicalize.
+  curr_installdir=`cd "$curr_installdir" && pwd`
+}
+func_find_prefixes ()
+{
+  # Compute the original/current installation prefixes by stripping the
+  # trailing directories off the original/current installation directories.
+  orig_installprefix="$orig_installdir"
+  curr_installprefix="$curr_installdir"
+  while true; do
+    orig_last=`echo "$orig_installprefix" | sed -n -e 's,^.*/\([^/]*\)$,\1,p'`
+    curr_last=`echo "$curr_installprefix" | sed -n -e 's,^.*/\([^/]*\)$,\1,p'`
+    if test -z "$orig_last" || test -z "$curr_last"; then
+      break
+    fi
+    if test "$orig_last" != "$curr_last"; then
+      break
+    fi
+    orig_installprefix=`echo "$orig_installprefix" | sed -e 's,/[^/]*$,,'`
+    curr_installprefix=`echo "$curr_installprefix" | sed -e 's,/[^/]*$,,'`
+  done
+}
+if test "no" = yes; then
+  exec_prefix="${prefix}"
+  bindir="${exec_prefix}/bin"
+  orig_installdir="$bindir" # see Makefile.am's *_SCRIPTS variables
+  func_find_curr_installdir # determine curr_installdir
+  func_find_prefixes
+  # Relocate the directory variables that we use.
+  gettext_dir=`echo "$gettext_dir/" | sed -e "s%^${orig_installprefix}/%${curr_installprefix}/%" | sed -e 's,/$,,'`
+fi
+
+# func_usage
+# outputs to stdout the --help usage message.
+func_usage ()
+{
+  echo "\
+Usage: autopoint [OPTION]...
+
+Copies standard gettext infrastructure files into a source package.
+
+Options:
+      --help           print this help and exit
+      --version        print version information and exit
+  -f, --force          force overwriting of files that already exist
+  -n, --dry-run        print modifications but don't perform them"
+#  echo "\
+#  -V version           copy the infrastructure of the specified gettext version
+#                         (dangerous)"
+  echo "
+Report bugs to <bug-gnu-gettext@gnu.org>."
+}
+
+# func_version
+# outputs to stdout the --version message.
+func_version ()
+{
+  echo "$progname (GNU $package) $version"
+  echo "Uses a versions archive in git format."
+  echo "Copyright (C) 2002-2010 Free Software Foundation, Inc.
+License GPLv3+: GNU GPL version 3 or later <http://gnu.org/licenses/gpl.html>
+This is free software: you are free to change and redistribute it.
+There is NO WARRANTY, to the extent permitted by law."
+  echo "Written by" "Bruno Haible"
+}
+
+# func_fatal_error message
+# outputs to stderr a fatal error message, and terminates the program.
+func_fatal_error ()
+{
+  echo "autopoint: *** $1" 1>&2
+  echo "autopoint: *** Stop." 1>&2
+  exit 1
+}
+
+# Command-line option processing.
+# Removes the OPTIONS from the arguments. Sets the variables:
+# - force           yes if --force was given, empty otherwise
+# - ver             gettext version if -V was given, empty otherwise
+# - doit            false if --dry-run was given, : otherwise
+{
+  force=
+  ver=
+  doit=:
+
+  while test $# -gt 0; do
+    case "$1" in
+      -n | --dry-run | --dry-ru | --dry-r | --dry- | --dry | --dr | --d )
+        shift
+        doit=false ;;
+      -f | --force | --forc | --for | --fo | --f )
+        shift
+        force=yes ;;
+      --help | --hel | --he | --h )
+        func_usage; exit 0 ;;
+#      -V ) # Some people put a space between -V and the version number.
+#        shift
+#        if test $# = 0; then
+#          func_usage 1>&2
+#          exit 1
+#        fi
+#        ver=$1;
+#        shift ;;
+#      -V*) # Some people omit the space between -V and the version number.
+#        ver=`echo "X$1" | sed -e 's/^X-V//'`
+#        shift ;;
+      --version | --versio | --versi | --vers | --ver | --ve | --v )
+        func_version
+        exit 0 ;;
+      -- ) # Stop option prcessing
+        shift; break ;;
+      -* )
+        echo "autopoint: unknown option $1" 1>&2
+        echo "Try 'autopoint --help' for more information." 1>&2
+        exit 1 ;;
+      * )
+        break ;;
+    esac
+  done
+}
+
+# Command-line argument processing.
+# Analyzes the remaining arguments.
+{
+  if test $# -gt 0; then
+    func_usage 1>&2
+    exit 1
+  fi
+}
+
+srcdir=`pwd`
+# The current directory is now $srcdir.
+
+# Check integrity of package: A configure.in/ac must be present. Sets variable
+# - configure_in    name of configure.in/ac file.
+if test -f configure.in; then
+  configure_in=configure.in
+else
+  if test -f configure.ac; then
+    configure_in=configure.ac
+  else
+    # KDE specific convention: configure.in.in
+    if test -f configure.in.in; then
+      configure_in=configure.in.in
+    else
+      func_fatal_error "Missing configure.in or configure.ac, please cd to your package first."
+    fi
+  fi
+fi
+
+# Check whether the -V option and the version number in configure.in match.
+# At least one of the two must be given. If both are given, they must agree.
+sed_extract_AM_GNU_GETTEXT_VERSION_argument='s/^AM_GNU_GETTEXT_VERSION(\([^()]*\)).*$/\1/'
+sed_remove_outer_brackets='s/^\[\(.*\)\]$/\1/'
+xver=`cat "$configure_in" | grep '^AM_GNU_GETTEXT_VERSION(' | sed -n -e "$sed_extract_AM_GNU_GETTEXT_VERSION_argument"p | sed -e "$sed_remove_outer_brackets" | sed -e 1q`
+if test -z "$xver" && test -f intl/VERSION; then
+  xver=`cat intl/VERSION | LC_ALL=C sed -n -e 's/^.*gettext-\([-+_.0-9A-Za-z]*\).*$/\1/p'`
+fi
+if test -n "$xver"; then
+  if test -n "$ver"; then
+    if test "X$ver" != "X$xver"; then
+      func_fatal_error "Version mismatch: specified -V $ver but the package uses gettext version $xver"
+    fi
+  else
+    ver="$xver"
+  fi
+else
+  if test -z "$ver"; then
+    func_fatal_error "Missing version: please specify in $configure_in through a line 'AM_GNU_GETTEXT_VERSION(x.yy.zz)' the gettext version the package is using"
+  fi
+fi
+
+# Check whether the version number is supported.
+case "$ver" in
+  0.10.35 | 0.10.36 | 0.10.37 | 0.10.38 | 0.10.39 | 0.10.40 | \
+  0.11 | 0.11.1 | 0.11.2 | 0.11.3 | 0.11.4 | 0.11.5 | \
+  0.12 | 0.12.1 | \
+  0.13 | 0.13.1 | \
+  0.14 | 0.14.1 | 0.14.2 | 0.14.3 | 0.14.4 | 0.14.5 | 0.14.6 | \
+  0.15 | \
+  0.16 | 0.16.1 | \
+  0.17 | \
+  0.18 | 0.18.1 )
+    ;;
+  *)
+    func_fatal_error "The AM_GNU_GETTEXT_VERSION declaration in your $configure_in
+               file requires the infrastructure from gettext-$ver but this version
+               is older. Please upgrade to gettext-$ver or newer."
+    ;;
+esac
+
+# Check in which directory config.rpath, mkinstalldirs etc. belong.
+auxdir=`cat "$configure_in" | grep '^AC_CONFIG_AUX_DIR' | sed -n -e 's/AC_CONFIG_AUX_DIR(\([^()]*\))/\1/p' | sed -e 's/^\[\(.*\)\]$/\1/' | sed -e 1q`
+if test -n "$auxdir"; then
+  auxdir="$auxdir/"
+fi
+
+# Check in which directory the *.m4 macros belong.
+m4dir=m4
+if test -f Makefile.am; then
+  # A package using automake.
+  # Extract the macro directory name from Makefile.am.
+  aclocal_amflags=`grep '^ACLOCAL_AMFLAGS[ 	]*=' Makefile.am | sed -e 's/^ACLOCAL_AMFLAGS[ 	]*=\(.*\)$/\1/'`
+  m4dir_is_next=
+  for arg in $aclocal_amflags; do
+    if test -n "$m4dir_is_next"; then
+      m4dir="$arg"
+      break
+    else
+      if test "X$arg" = "X-I"; then
+        m4dir_is_next=yes
+      else
+        m4dir_is_next=
+      fi
+    fi
+  done
+fi
+
+# Check whether to omit the intl/ directory.
+omitintl=`cat "$configure_in" | grep '^AM_GNU_GETTEXT' | sed -n -e 's/^AM_GNU_GETTEXT(\([^(),]*\).*$/\1/p' | sed -e 's/^\[\(.*\)\]$/\1/' | sed -e 1q`
+omitintl=`if test 'external' = "$omitintl"; then echo yes; fi`
+
+# Check in which directory or directories the po/* infrastructure belongs.
+sed_extract_config_files='s,#.*$,,
+s,^dnl .*$,,
+s, dnl .*$,,
+/AC_CONFIG_FILES(/ {
+  ta
+  :a
+    s/)/)/
+    tb
+    s/\\$//
+    N
+    ba
+  :b
+  s,^.*AC_CONFIG_FILES([[ ]*\([^]"$`\\)]*\).*$,\1,p
+}'
+configfiles=`cat "$configure_in" | sed -n -e "$sed_extract_config_files"`
+# PO directories have a Makefile.in generated from Makefile.in.in.
+# Treat a directory as a PO directory if and only if it has a
+# POTFILES.in file. This allows packages to have multiple PO
+# directories under different names or in different locations.
+sed_remove_Makefile_in='s,/Makefile\.in$,,'
+podirs=`for f in $configfiles; do case "$f" in */Makefile.in) echo $f;; esac; done | sed -e "$sed_remove_Makefile_in"`
+if test -z "$podirs"; then
+  # If we cannot get the list of PO directories from configure.ac, assume the
+  # common default.
+  podirs="po"
+fi
+
+# Set up a temporary checkout directory.
+# Set variables
+# - work_dir        directory containing the temporary checkout
+work_dir=tmpwrk$$
+mkdir "$work_dir" || {
+  if test -d "$work_dir"; then
+    func_fatal_error "directory $work_dir already exists"
+  else
+    func_fatal_error "cannot create directory $work_dir"
+  fi
+}
+
+# We support three archive formats.
+#
+# Format | Size (KiB) for gettext-0.17 | Extra tools needed |
+# -------+-----------------------------+--------------------+
+#  dir   |            3000             |         --         |
+#  cvs   |             356             |         cvs        |
+#  git   |             484             |         git        |
+# -------+-----------------------------+--------------------+
+
+case "git" in
+  dir)
+    # The archive of different versions is very large, but using it does not
+    # require special tools.
+    gzip -d -c < "$gettext_dir/archive.dir.tar.gz" | (cd "$work_dir" && tar xf - "gettext-$ver")
+    if test `find "$work_dir" -type f -print | wc -l` = 0; then
+      rm -rf "$work_dir"
+      func_fatal_error "infrastructure files for version $ver not found; this is autopoint from GNU $package $version"
+    fi
+    mv "$work_dir/gettext-$ver" "$work_dir/archive"
+    ;;
+
+  cvs)
+    # We distributed the many different versions of the files in a CVS
+    # repository. This guaranteed a good compression rate:
+    #
+    #   Including version    size in KB of
+    #                       "du autopoint-files/archive"
+    #      0.10.35                  240
+    #      0.10.36                  428
+    #      0.10.37                  436
+    #      0.10.38                  488
+    #      0.10.39                  500
+    #      0.10.40                  528
+    #      0.11                     720
+    #      0.11.1                   740
+    #      0.11.2                   748
+    #      0.11.3                   804
+    #      0.11.4                   864
+    #      0.11.5                   880
+    #      0.12                    1032
+    #      0.12.1                  1032
+    #      0.13                    1220
+    #      0.13.1                  1236
+    #      0.14                    1296
+    #      0.14.1                  1300
+    #      0.14.2                  1420
+    #      0.14.3                  1428
+    #      0.14.4                  1464
+    #      0.14.5                  1508
+    #      0.14.6                  1580
+    #      0.15                    1760
+    #      0.16                    1808
+    #      0.16.1                  1812
+    #      0.17                    2128
+    #      0.18                    2656
+    #
+    # The requirement that the user must have the CVS program available is not
+    # a severe restrictions, because most of the people who use autopoint are
+    # users of CVS.
+    #
+    # But the CVS format is now deprecated, because "cvs init" does not work in
+    # all circumstances
+    # (see <http://lists.gnu.org/archive/html/bug-cvs/2010-05/msg00003.html>)
+    # and we are not allowed to distribute the cvs infrastructure files
+    # ourselves
+    # (see <http://lists.gnu.org/archive/html/bug-cvs/2010-06/msg00011.html>).
+    #
+    # Check availability of the CVS program.
+    (cvs -v) >/dev/null 2>/dev/null || func_fatal_error "cvs program not found"
+
+    # Set up a temporary CVS repository.
+    # We need the temporary CVS repository because any checkout needs write
+    # access to the CVSROOT/history file, so it cannot be under $gettext_dir.
+    # We need the temporary checkout directory because when --force was not
+    # given, we need to compare the existing files with the checked out ones.
+    # Set variables
+    # - cvs_dir         directory containing the temporary repository
+    cvs_dir=tmpcvs$$
+    # Use an umask of 077, to avoid attacks that work by overwriting files in
+    # the "$CVSROOT"/CVSROOT directory.
+    (umask 077 && mkdir "$cvs_dir") || {
+      if test -d "$cvs_dir"; then
+        func_fatal_error "directory $cvs_dir already exists"
+      else
+        func_fatal_error "cannot create directory $cvs_dir"
+      fi
+    }
+    CVSROOT="$srcdir/$cvs_dir"
+    unset CVS_CLIENT_LOG
+    unset CVS_CLIENT_PORT
+    unset CVS_IGNORE_REMOTE_ROOT
+    unset CVS_LOCAL_BRANCH_NUM
+    unset CVS_NOBASES
+    unset CVS_PASSFILE
+    unset CVS_PASSWORD
+    unset CVS_PROXY_PORT
+    unset CVS_RCMD_PORT
+    unset CVS_RSH
+    unset CVS_SERVER
+    unset CVS_SERVER_SLEEP
+    CVS_SIGN_COMMITS=
+    export CVS_SIGN_COMMITS
+    unset CVS_SSH
+    unset CVS_VERIFY_CHECKOUTS
+    unset CVS_VERIFY_TEMPLATE
+    unset CVSIGNORE
+    unset CVSREAD
+    unset CVSREADONLYFS
+    unset CVSUMASK
+    unset CVSWRAPPERS
+
+    # Need to pass -d "$CVSROOT", because there may be a CVS directory in the
+    # current directory.
+    cvs -d "$CVSROOT" init
+    gzip -d -c < "$gettext_dir/archive.cvs.tar.gz" | (cd "$cvs_dir" && tar xf -)
+
+    cd "$work_dir"
+    cvsver=gettext-`echo "$ver" | sed -e 's/\./_/g'`
+    (cvs -d "$CVSROOT" checkout -r"$cvsver" archive > /dev/null) 2>&1 | grep -v '^cvs checkout: Updating'
+    find archive -name CVS -type d -print | xargs rm -rf
+    cd ..
+    rm -rf "$cvs_dir"
+    # Check that really all CVS directories are gone, otherwise we would overwrite
+    # the contents of the user's CVS directories.
+    if test `find $work_dir/archive -name CVS -type d -print | wc -l` != 0; then
+      rm -rf "$work_dir"
+      func_fatal_error "failed to remove all CVS subdirectories"
+    fi
+    if test `find $work_dir/archive -type f -print | wc -l` = 0; then
+      rm -rf "$work_dir"
+      func_fatal_error "infrastructure files for version $ver not found; this is autopoint from GNU $package $version"
+    fi
+    ;;
+
+  git)
+    # Check availability of the git program.
+    (git --version) >/dev/null 2>/dev/null || func_fatal_error "git program not found"
+    mkdir "$work_dir/archive"
+    gzip -d -c < "$gettext_dir/archive.git.tar.gz" | (cd "$work_dir/archive" && tar xf -)
+    (cd "$work_dir/archive" && git checkout -q "gettext-$ver") || {
+      rm -rf "$work_dir"
+      func_fatal_error "infrastructure files for version $ver not found; this is autopoint from GNU $package $version"
+    }
+    (cd "$work_dir/archive" && rm -rf .git .gitignore)
+    ;;
+esac
+
+# func_destfile file
+# determines the destination file, relative to the package's top level
+# directory, for a given file name, relative to archive.
+# Sets variables
+# - destfile        relative destination file name, or
+#                   empty if the file shall be omitted
+# - sharedowner     yes if the file is not only owned by GNU gettext but may
+#                   be installed by automake or other tools, otherwise empty
+# - allpodirs       yes if the file is to be installed in every dir in $podirs
+func_destfile ()
+{
+  # There are five categories of files:
+  # ABOUT_NLS -> top level directory
+  # config.rpath mkinstalldirs -> $auxdir
+  # m4/* -> $m4dir/
+  # intl/* -> intl/
+  # po/* -> 
+  sharedowner=
+  allpodirs=
+  case `echo "$1" | sed -e 's,[^/]*$,,'` in
+    "" )
+      case "$1" in
+        config.rpath ) destfile="$auxdir$1" ;;
+        mkinstalldirs ) destfile="$auxdir$1" sharedowner=yes ;;
+        * ) destfile="$1" ;;
+      esac
+      ;;
+    m4/ ) destfile=`echo "$1" | sed -e "s,^m4/,$m4dir/,"` ;;
+    intl/ ) if test -n "$omitintl"; then destfile=""; else destfile="$1"; fi ;;
+    po/ ) destfile=`echo "$1" | sed -e "s,^po/,,"` allpodirs=yes ;;
+    * ) destfile="$1" ;;
+  esac
+}
+
+# func_compare existingfile gettextfile
+# compares the existing file and the file from gettext, and decides whether the
+# existing file should be overwritten with the file from gettext. Returns 0 if
+# it should be overwritten, or 1 if it should be skipped.
+sed_extract_serial='s/^#.* serial \([^ ]*\).*/\1/p
+1q'
+func_compare ()
+{
+  if cmp -s "$1" "$2"; then
+    false
+  else
+    case "$2" in
+      *.m4)
+        # For interoperability with gnulib. gnulib often has newer versions of
+        # the *.m4 files than the latest gettext release. Don't overwrite a
+        # newer version from gnulib with an older version from the gettext
+        # release. The version can be retrieved from the first line, which
+        # looks like this:   # file.m4 serial NN ...
+        existing_serial=`sed -n -e "$sed_extract_serial" < "$1"`
+        gettext_serial=`sed -n -e "$sed_extract_serial" < "$2"`
+        if test -n "$existing_serial" && test -n "$gettext_serial" \
+           && test "$existing_serial" -ge "$gettext_serial" 2> /dev/null; then
+          false
+        else
+          true
+        fi
+        ;;
+      *)
+        true
+        ;;
+    esac
+  fi
+}
+
+# If some files have been locally modified and we have not been requested
+# to overwrite them, then bail out. This is better than leaving a source
+# package around where half of the files are locally modified and half are
+# original - too great risk of version mismatch.
+if test -z "$force"; then
+  mismatch=
+  func_tmpdir
+  mismatchfile="$tmp"/autopoint.diff
+  for file in `find "$work_dir/archive" -type f -print | sed -e "s,^$work_dir/archive/,," | LC_ALL=C sort`; do
+    func_destfile "$file"
+    if test -n "$destfile"; then
+      func_compare_to_destfile ()
+      {
+        finaldestfile="$1"
+        if test -f "$finaldestfile"; then
+          if func_compare "$finaldestfile" "$work_dir/archive/$file"; then
+            if test -n "$sharedowner"; then
+              echo "autopoint: warning: File $finaldestfile has been locally modified." 1>&2
+            else
+              echo "autopoint: File $finaldestfile has been locally modified." 1>&2
+              mismatch=yes
+              diff -c "$work_dir/archive/$file" "$finaldestfile" | sed -e "1s,$work_dir/archive/,," >> "$mismatchfile"
+            fi
+          fi
+        fi
+      }
+      if test -n "$allpodirs"; then
+        for dir in $podirs; do
+          func_compare_to_destfile "$dir/$destfile"
+        done
+      else
+        func_compare_to_destfile "$destfile"
+      fi
+    fi
+  done
+  if test -n "$mismatch"; then
+    rm -rf "$work_dir"
+    func_fatal_error "Some files have been locally modified. Not overwriting them because --force has not been specified. For your convenience, you find the local modifications in the file '$mismatchfile'."
+  fi
+  rm -rf "$tmp"
+fi
+
+# func_mkdir_for to
+# ensures the directory that would the given file exists.
+# 'to' is a relative pathname, relative to the current directory.
+func_mkdir_for ()
+{
+  base=`echo "$1" | sed -e 's,/[^/]*$,,'`
+  if test "X$base" != "X$1" && test -n "$base"; then
+    func_mkdir_for "$base"
+    # Recompute base. It was clobbered by the recursive call.
+    base=`echo "$1" | sed -e 's,/[^/]*$,,'`
+    test -d "$base" || { echo "Creating directory $base"; mkdir "$base"; }
+  fi
+}
+
+# func_copy from to
+# copies a file.
+# 'from' is a relative pathname, relative to the current directory.
+# 'to' is a relative pathname, relative to the current directory.
+func_copy ()
+{
+  if $doit; then
+    func_mkdir_for "$2"
+    rm -f "$2"
+    echo "Copying file $2"
+    cp "$1" "$2"
+  else
+    echo "Copy file $2"
+  fi
+}
+
+# func_backup to
+# makes a backup of a file that is about to be overwritten or replaced.
+# 'to' is a relative pathname, relative to the current directory.
+func_backup ()
+{
+  if $doit; then
+    if test -f "$1"; then
+      rm -f "$1~"
+      cp -p "$1" "$1~"
+    fi
+  fi
+}
+
+# Now copy the files.
+for file in `find "$work_dir/archive" -type f -print | sed -e "s,^$work_dir/archive/,," | LC_ALL=C sort`; do
+  func_destfile "$file"
+  if test -n "$destfile"; then
+    func_copy_to_destfile ()
+    {
+      finaldestfile="$1"
+      mustcopy=
+      if test -f "$finaldestfile"; then
+        if func_compare "$finaldestfile" "$work_dir/archive/$file"; then
+          if test -n "$force"; then
+            # Overwrite locally modified file.
+            mustcopy=yes
+          fi
+          # If --force is not specified, don't overwrite locally modified files
+          # for which GNU gettext is a shared owner.
+        fi
+      else
+        mustcopy=yes
+      fi
+      if test -n "$mustcopy"; then
+        func_backup "$finaldestfile"
+        func_copy "$work_dir/archive/$file" "$finaldestfile"
+      fi
+    }
+    if test -n "$allpodirs"; then
+      for dir in $podirs; do
+        func_copy_to_destfile "$dir/$destfile"
+      done
+    else
+      func_copy_to_destfile "$destfile"
+    fi
+  fi
+done
+
+# That's it.
+rm -rf "$work_dir"
+exit 0

libs/gettext/bin64/gettext.sh

@@ -0,0 +1,123 @@
+#! /bin/sh
+#
+# Copyright (C) 2003, 2005-2007 Free Software Foundation, Inc.
+#
+# This program is free software; you can redistribute it and/or modify it
+# under the terms of the GNU Library General Public License as published
+# by the Free Software Foundation; either version 2, or (at your option)
+# any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU Library General Public
+# License along with this program; if not, write to the Free Software
+# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301,
+# USA.
+#
+
+# Find a way to echo strings without interpreting backslash.
+if test "X`(echo '\t') 2>/dev/null`" = 'X\t'; then
+  echo='echo'
+else
+  if test "X`(printf '%s\n' '\t') 2>/dev/null`" = 'X\t'; then
+    echo='printf %s\n'
+  else
+    echo_func () {
+      cat <<EOT
+$*
+EOT
+    }
+    echo='echo_func'
+  fi
+fi
+
+# This script is primarily a shell function library. In order for
+# ". gettext.sh" to find it, we install it in $PREFIX/bin (that is usually
+# contained in $PATH), rather than in some other location such as
+# $PREFIX/share/sh-scripts or $PREFIX/share/gettext. In order to not violate
+# the Filesystem Hierarchy Standard when doing so, this script is executable.
+# Therefore it needs to support the standard --help and --version.
+if test -z "$ZSH_VERSION"; then
+  # zsh is not POSIX compliant: By default, while ". gettext.sh" is executed,
+  # it sets $0 to "gettext.sh", defeating the purpose of this test. But
+  # fortunately we know that when running under zsh, this script is always
+  # being sourced, not executed, because hardly anyone is crazy enough to
+  # install zsh as /bin/sh.
+  case "$0" in
+    gettext.sh | */gettext.sh | *\\gettext.sh)
+      progname=$0
+      package=gettext-runtime
+      version=0.18.1
+      # func_usage
+      # outputs to stdout the --help usage message.
+      func_usage ()
+      {
+        echo "GNU gettext shell script function library version $version"
+        echo "Usage: . gettext.sh"
+      }
+      # func_version
+      # outputs to stdout the --version message.
+      func_version ()
+      {
+        echo "$progname (GNU $package) $version"
+        echo "Copyright (C) 2003-2007 Free Software Foundation, Inc.
+License GPLv2+: GNU GPL version 2 or later <http://gnu.org/licenses/gpl.html>
+This is free software: you are free to change and redistribute it.
+There is NO WARRANTY, to the extent permitted by law."
+        echo "Written by" "Bruno Haible"
+      }
+      if test $# = 1; then
+        case "$1" in
+          --help | --hel | --he | --h )
+            func_usage; exit 0 ;;
+          --version | --versio | --versi | --vers | --ver | --ve | --v )
+            func_version; exit 0 ;;
+        esac
+      fi
+      func_usage 1>&2
+      exit 1
+      ;;
+  esac
+fi
+
+# eval_gettext MSGID
+# looks up the translation of MSGID and substitutes shell variables in the
+# result.
+eval_gettext () {
+  gettext "$1" | (export PATH `envsubst --variables "$1"`; envsubst "$1")
+}
+
+# eval_ngettext MSGID MSGID-PLURAL COUNT
+# looks up the translation of MSGID / MSGID-PLURAL for COUNT and substitutes
+# shell variables in the result.
+eval_ngettext () {
+  ngettext "$1" "$2" "$3" | (export PATH `envsubst --variables "$1 $2"`; envsubst "$1 $2")
+}
+
+# Note: This use of envsubst is much safer than using the shell built-in 'eval'
+# would be.
+# 1) The security problem with Chinese translations that happen to use a
+#    character such as \xe0\x60 is avoided.
+# 2) The security problem with malevolent translators who put in command lists
+#    like "$(...)" or "`...`" is avoided.
+# 3) The translations can only refer to shell variables that are already
+#    mentioned in MSGID or MSGID-PLURAL.
+#
+# Note: "export PATH" above is a dummy; this is for the case when
+# `envsubst --variables ...` returns nothing.
+#
+# Note: In eval_ngettext above, "$1 $2" means a string whose variables set is
+# the union of the variables set of "$1" and "$2".
+#
+# Note: The minimal use of backquote above ensures that trailing newlines are
+# not dropped, not from the gettext invocation and not from the value of any
+# shell variable.
+#
+# Note: Field splitting on the `envsubst --variables ...` result is desired,
+# since envsubst outputs the variables, separated by newlines. Pathname
+# wildcard expansion or tilde expansion has no effect here, since the words
+# output by "envsubst --variables ..." consist solely of alphanumeric
+# characters and underscore.