Merge branch 'Saturn-Next' into polyholes

this whole sky handling is just incredibly stupid and wouldve been such an easy fix, but here we go
this is just more stupid hacks but i really dont feel bad here since the code already hacked around a bunch of shit
just hoping this wont cause any issues on some maps and needs testing
sigh

src/CMakeLists.txt

@@ -246,6 +246,8 @@ set(SRB2_CONFIG_ASAN OFF CACHE BOOL
 	"Compile with AddressSanitizer (libasan).")
 set(SRB2_CONFIG_UBSAN OFF CACHE BOOL
 	"Compile with UndefinedBehaviorSanitizer (libubsan).")
+set(SRB2_CONFIG_TSAN OFF CACHE BOOL
+	"Compile with ThreadSanitizer (libtsan).")
 
 set(SRB2_CONFIG_MUMBLE ON CACHE BOOL
 	"Enable Mumble support")

src/Makefile

@@ -75,6 +75,7 @@
 # PROFILEMODE=1 - Enable performance profiling (gprof).
 # USEASAN=1 - Enable building with Address Sanitizer.
 # USEUBSAN=1 - Enable building with Undefined Behavior Sanitizer.
+# USETSAN=1 - Enable building with Thread Sanitizer.
 # NOLIBBACKTRACE=1 - Disable using Libbacktrace for crashlog traces.
 #
 # General flags for building:
@@ -261,23 +262,35 @@ debug_opts=-D_DEBUG
 else # build a normal optimized version
 debug_opts=-DNDEBUG
 opts+=-O3
-ifndef NOLTO
-# compile with LTO
-opts+=-flto=auto
-libs+=-flto=auto
-endif
 endif
 
 ifdef USEASAN
 # compile with asan
 opts+=-O1 -fsanitize=address -fno-omit-frame-pointer -fno-common
 libs+=-fsanitize=address
+NOLTO=1
 endif
 
 ifdef USEUBSAN
 # compile with ubsan
 opts+=-O1 -fsanitize=undefined -fno-omit-frame-pointer
 libs+=-fsanitize=undefined
+NOLTO=1
+endif
+
+ifdef USETSAN
+# compile with tsan
+opts+=-O1 -fsanitize=thread -fno-omit-frame-pointer
+libs+=-fsanitize=thread
+NOLTO=1
+endif
+
+ifndef DEBUGMODE
+ifndef NOLTO
+# compile with LTO
+opts+=-flto=auto
+libs+=-flto=auto
+endif
 endif
 
 ifdef USEJEMALLOC

src/dedicated/CMakeLists.txt

@@ -119,20 +119,25 @@ target_compile_definitions(SRB2SDL2 PRIVATE
 	-DHAVE_THREADS
 )
 
-if(SRB2_CONFIG_LTO AND NOT SRB2_CONFIG_DEBUGMODE)
+if(SRB2_CONFIG_LTO AND NOT SRB2_CONFIG_DEBUGMODE AND NOT SRB2_CONFIG_ASAN AND NOT SRB2_CONFIG_UBSAN AND NOT SRB2_CONFIG_TSAN)
 	set_property(TARGET SRB2SDL2 PROPERTY INTERPROCEDURAL_OPTIMIZATION TRUE)
 endif()
 
 if(SRB2_CONFIG_ASAN)
-	target_compile_options(SRB2SDL2 PRIVATE -fsanitize=address)
+	target_compile_options(SRB2SDL2 PRIVATE -O1 -fsanitize=address -fno-omit-frame-pointer -fno-common)
 	target_link_options(SRB2SDL2 PRIVATE -fsanitize=address)
 endif()
 
 if(SRB2_CONFIG_UBSAN)
-	target_compile_options(SRB2SDL2 PRIVATE -fsanitize=undefined)
+	target_compile_options(SRB2SDL2 PRIVATE -O1 -fsanitize=undefined -fno-omit-frame-pointer)
 	target_link_options(SRB2SDL2 PRIVATE -fsanitize=undefined)
 endif()
 
+if(SRB2_CONFIG_TSAN)
+	target_compile_options(SRB2SDL2 PRIVATE -O1 -fsanitize=thread -fno-omit-frame-pointer)
+	target_link_options(SRB2SDL2 PRIVATE -fsanitize=thread)
+endif()
+
 ## strip debug symbols into separate file when using gcc
 # if(CMAKE_COMPILER_IS_GNUCC)
 # 	if(${CMAKE_BUILD_TYPE} MATCHES Debug)

src/hardware/hw_bsp.c

@@ -96,7 +96,7 @@ static void HWR_FreePoly(poly_t *poly)
 // divfrac = how far along partline vector is crossing pt
 static boolean fracdivline(fdivline_t *partline, polyvertex_t *v1, polyvertex_t *v2)
 {
-	double frac1, frac2;
+	double frac;
 	double num; // numerator
 	double den; // denominator
 	double v1x, v1y, v1dx, v1dy; // polygon side vector, v1->v2
@@ -122,24 +122,23 @@ static boolean fracdivline(fdivline_t *partline, polyvertex_t *v1, polyvertex_t
 	// first check the frac along the polygon segment,
 	// (do not accept hit with the extensions)
 	num = (v3x - v1x)*v3dy + (v1y - v3y)*v3dx;
-	frac1 = num / den;
+	frac = num / den;
 
 	// 0= cross at v1, 1.0= cross at v2
-	if (frac1 < 0.0 || frac1 > 1.0)  // double
+	if (frac < 0.0 || frac > 1.0)  // double
 		return false;  // not within the polygon side
 
 	// now get the frac along the BSP line
 	// which is useful to determine what is left, what is right
 	num = (v3x - v1x)*v1dy + (v1y - v3y)*v1dx;
-	frac2 = num / den;
 
-	partline->divfrac = frac2;  // how far along partline vector
+	partline->divfrac = num / den;  // how far along partline vector
 
 	// [WDJ] find the interception point along the segment.
 	// It should be slightly more accurate because it is always closer to the
 	// crossing point than arbitrary positions on the partition line.
-	partline->divpt.x = v1x + v1dx*frac1;
-	partline->divpt.y = v1y + v1dy*frac1;
+	partline->divpt.x = v1x + v1dx*frac;
+	partline->divpt.y = v1y + v1dy*frac;
 
 	return true;
 }
@@ -161,6 +160,71 @@ static boolean SameVertex(polyvertex_t *p1, polyvertex_t *p2)
 	return true;
 }
 
+// Adapted from function in prboom.
+// Point is to rightside of divline when result > 0,
+// but result is multiplied by length of divline.
+// Returns near 0, when point is on, or nearly on, the divline.
+static inline double point_rightside(fdivline_t *dl, polyvertex_t *v4)
+{
+	// Cross product of dl and vector dl->(x,y) to v4,
+	// is > 0 when v4 is to right side of divline.
+	// Viewed along divline from vertex, looking towards positive dx,dy.
+	// If divline is rotated until dy>0 and dx = 0, then true when rotated
+	// vertex position is to the right of the divline (v4->x > dl->x).
+	return ((((double)(v4->x) - (double)(dl->x)) * (double)(dl->dy))
+		 - (((double)(v4->y) - (double)(dl->y)) * (double)(dl->dx)));
+}
+
+// [WDJ] The front and back MUST match the BSP determination, else it will assign
+// this poly to the wrong sector.
+// May have 1 point on the line, and other points might be very close to the line.
+// Can only trust a test of a point that is NOT on the line.
+// Using a tstdist = 0.5f worked, but it might break on very small poly.
+// Avactor.wad had polys with d = 9.09, 5552, 1.64, 1011, 14252, 0.0136, 0.00634, 14655, 3,
+// -0.3044, 7, 1.53, etc..,
+// and one poly with d = -0.023 with the rest of the points d > 0.
+// One 14 point poly with divline len=8, had to test 9 points to find d = 36.
+// Typical: divline len=70 d=6828, divline len=1.0 d=35, divline len=1.414 d=5.
+// The result of point_rightside is proportional to the length of divline.
+// The divline length can be from 1.414 to 14000.
+static void UnsplitPoly(fdivline_t *dlnp, poly_t *poly,
+						poly_t **frontpoly, poly_t **backpoly)
+{
+	int32_t i;
+	double d;
+	const double tstd = hypot((double)dlnp->dx, (double)dlnp->dy) / 2.0;
+	double sumd = 0; // accumulated left or rightness.
+
+	for (i = 0; i < poly->numpts; i++)
+	{
+		// Look for a point that is obviously to the left or right.
+		d = point_rightside(dlnp, &poly->pts[i]);  // d > 0 is right
+		sumd += d;
+
+		if (d > tstd)
+			goto poly_rightside;
+
+		if (d < -tstd)
+			goto poly_leftside;
+	}
+
+	// Did not find an obvious left or right point, then
+	if (sumd < 0)
+		goto poly_leftside;
+
+poly_rightside:
+	// poly is to rightside of divline.
+	*frontpoly = poly;
+	*backpoly = NULL;
+	return;
+
+poly_leftside:
+	// poly is to leftside of divline.
+	*frontpoly = NULL;
+	*backpoly = poly;
+	return;
+}
+
 // split a _CONVEX_ polygon in two convex polygons
 // outputs:
 //   frontpoly : polygon on right side of bsp line
@@ -263,10 +327,7 @@ static void SplitPoly (fdivline_t *dlnp,        // splitting parametric line
 		// linedefs where each side point the same sector, that is:
 		// the deep water effect with the original Doom
 
-		//TODO: make sure front poly is to front of partition line?
-
-		*frontpoly = poly;
-		*backpoly  = NULL;
+		UnsplitPoly(dlnp, poly, frontpoly, backpoly);
 		return;
 	}
 
@@ -274,16 +335,14 @@ static void SplitPoly (fdivline_t *dlnp,        // splitting parametric line
 	if (pe < 0)
 	{
 		//I_Error("SplitPoly: only one point for split line (%d %d)", ps, pe);
-		*frontpoly = poly;
-		*backpoly  = NULL;
+		UnsplitPoly(dlnp, poly, frontpoly, backpoly);
 		return;
 	}
 
 	if (pe <= ps)
 	{
 		//I_Error("SplitPoly: invalid splitting line (%d %d)", ps, pe);
-		*frontpoly = poly;
-		*backpoly  = NULL;
+		UnsplitPoly(dlnp, poly, frontpoly, backpoly);
 		return;
 	}
 
@@ -388,6 +447,10 @@ static poly_t *CutOutSubsecPoly(seg_t *lseg, INT32 segcount, poly_t *poly)
 	vertex_t *v1, *v2;
 	fdivline_t cutseg; // x, y, dx, dy as start of node_t struct
 
+	// empty poly? just save us some time then
+	if (poly->numpts <= 0)
+		return frontpoly;
+
 	// for each seg of the subsector
 	for (; segcount--; lseg++)
 	{
@@ -489,6 +552,23 @@ static poly_t *CutOutSubsecPoly(seg_t *lseg, INT32 segcount, poly_t *poly)
 			// need 2 points
 			if (pe >= 0)
 			{
+				// Cuts that miss the polygon.
+				if (ps_frac < 0.0 && cutseg.divfrac < 0.0)
+					continue;
+
+				if (ps_frac > 1.0 && cutseg.divfrac > 1.0)
+					continue;
+#define FRAC_EP 0.01f
+				// Reject cuts that could make the polygon non-convex.
+
+				// Cannot make normal cut, ps_frac end is loose.
+				if ((ps_frac < (0.0 - FRAC_EP)) || (ps_frac > (1.0f + FRAC_EP)))
+					continue;
+
+				// Cannot make normal cut, cutseg.divfrac end is loose.
+				if ((cutseg.divfrac < (0.0 - FRAC_EP)) || (cutseg.divfrac > (1.0f + FRAC_EP)))
+					continue;
+#undef FRAC_EP
 				// generate FRONT poly
 				frontpoly = HWR_AllocPoly(poly_num_pts);
 
@@ -680,7 +760,11 @@ static void WalkBSPNode(INT32 bspnum, poly_t *poly, UINT16 *leafnode, fixed_t *b
 		memcpy(bbox, bsp->bbox[0], 4*sizeof (fixed_t));
 	}
 	else
-		I_Error("WalkBSPNode: no front poly?");
+	{
+		// [WDJ] Having no front poly is as likely as no back poly, since
+		// logic in Split Poly was changed to check poly direction.
+		// I_Error("HWR_WalkBSPNode: no front poly, bspnum= %d\n", bspnum);
+	}
 
 	// Recursively divide back space.
 	if (backpoly)

src/hardware/hw_cache.c

@@ -614,16 +614,8 @@ void HWR_FreeMapTextures(void)
 	gl_numtextures = 0;
 }
 
-#define NAME    flatcheck
-#define KEY_TY  UINT32
-#define HASH_FN vt_hash_integer
-#define CMPR_FN vt_cmpr_integer
-#include "../verstable.h"
-
 static void HWR_PrecacheLevelFlats(void)
 {
-	// lookup for flats that may´ve been already loaded
-	flatcheck flatpresent;
 	size_t i;
 	INT32 k;
 
@@ -635,9 +627,6 @@ static void HWR_PrecacheLevelFlats(void)
 	}
 #endif
 
-	flatcheck_init(&flatpresent);
-	flatcheck_reserve(&flatpresent, numlevelflats);
-
 	// special case for encore
 #if 0
 #ifdef GLENCORE
@@ -689,11 +678,7 @@ static void HWR_PrecacheLevelFlats(void)
 		{
 			const levelflat_t *levelflat = &levelflats[i];
 
-			if (flatcheck_is_end(flatcheck_get(&flatpresent, levelflat->lumpnum)))
-			{
-				HWR_GetFlat(levelflat->lumpnum, false);
-				flatcheck_insert(&flatpresent, levelflat->lumpnum);
-			}
+			HWR_GetFlat(levelflat->lumpnum, false);
 
 			if (levelflat->speed) // is it an animated flat ?
 			{
@@ -701,17 +686,11 @@ static void HWR_PrecacheLevelFlats(void)
 				for (k = 0; k < levelflat->numpics; k++)
 				{
 					lumpnum_t lump = levelflat->baselumpnum + k;
-					if (flatcheck_is_end(flatcheck_get(&flatpresent, lump)))
-					{
-						HWR_GetFlat(lump, false);
-						flatcheck_insert(&flatpresent, lump);
-					}
+					HWR_GetFlat(lump, false);
 				}
 			}
 		}
 	}
-
-	flatcheck_cleanup(&flatpresent);
 }
 
 static void HWR_PrecacheLevelTextures(void)

src/hardware/hw_main.cpp

@@ -1239,46 +1239,44 @@ static inline boolean HWR_BlendMidtextureSurface(FSurfaceInfo *pSurf)
 
 	pSurf->PolyColor.s.alpha = 0xFF;
 
-	if (LIKELY(!gl_curline->polyseg))
-	{
-		// check if linedef alpha is within range
-		const boolean linealpha = (gl_linedef->alpha >= 0 && gl_linedef->alpha < FRACUNIT);
+	// check if linedef alpha is within range
+	const boolean linealpha = (gl_linedef->alpha >= 0 && gl_linedef->alpha < FRACUNIT);
 
-		// set alpha for transparent walls
-		switch (gl_linedef->special)
-		{
-			// Translucent linedef types
-			case 102:
-			case 121 ... 125:
-			case 141 ... 145:
-			case 174:
-			case 175:
-			case 192:
-			case 195:
-			case 221:
-			case 253:
-			case 256:
-				if (gl_linedef->blendmode && linealpha)
+	// set alpha for transparent walls
+	switch (gl_linedef->special)
+	{
+		// Translucent linedef types
+		case 102:
+		case 121 ... 125:
+		case 141 ... 145:
+		case 174:
+		case 175:
+		case 192:
+		case 195:
+		case 221:
+		case 253:
+		case 256:
+			if (gl_linedef->blendmode && linealpha)
+				blendmode = HWR_SurfaceBlend(gl_linedef->blendmode, R_GetLinedefTransTable(gl_linedef->alpha), pSurf);
+			else
+				blendmode = PF_Translucent;
+			break;
+		default:
+			if (gl_linedef->blendmode)
+			{
+				if (linealpha)
 					blendmode = HWR_SurfaceBlend(gl_linedef->blendmode, R_GetLinedefTransTable(gl_linedef->alpha), pSurf);
 				else
-					blendmode = PF_Translucent;
-				break;
-			default:
-				if (gl_linedef->blendmode)
-				{
-					if (linealpha)
-						blendmode = HWR_SurfaceBlend(gl_linedef->blendmode, R_GetLinedefTransTable(gl_linedef->alpha), pSurf);
-					else
-						blendmode = HWR_GetBlendModeFlag(gl_linedef->blendmode);
-				}
-				else if (linealpha)
-					blendmode = HWR_TranstableToAlpha(R_GetLinedefTransTable(gl_linedef->alpha), pSurf);
-				else
-					blendmode = PF_Masked;
-				break;
-		}
+					blendmode = HWR_GetBlendModeFlag(gl_linedef->blendmode);
+			}
+			else if (linealpha)
+				blendmode = HWR_TranstableToAlpha(R_GetLinedefTransTable(gl_linedef->alpha), pSurf);
+			else
+				blendmode = PF_Masked;
+			break;
 	}
-	else if (gl_curline->polyseg->translucency > 0)
+
+	if (gl_curline->polyseg && gl_curline->polyseg->translucency > 0)
 	{
 		// Polyobject translucency is shared between all of its lines
 		if (gl_curline->polyseg->translucency >= NUMTRANSMAPS) // wall not drawn
@@ -1385,7 +1383,8 @@ void HWR_ProcessSeg(void) // Sort of like GLWall::Process in GZDoom
 	// two sided line
 	if (gl_backsector)
 	{
-		INT32 gl_toptexture = 0, gl_bottomtexture = 0;
+		const INT32 gl_toptexture = R_GetTextureNum(gl_sidedef->toptexture);
+		const INT32 gl_bottomtexture = R_GetTextureNum(gl_sidedef->bottomtexture);
 
 		fixed_t texturevpeg;
 
@@ -1396,7 +1395,7 @@ void HWR_ProcessSeg(void) // Sort of like GLWall::Process in GZDoom
 		if (!gl_curline->polyseg) // Don't do it for polyobjects
 		{
 			// Sky Ceilings
-			wallVerts[3].y = wallVerts[2].y = FLOATMAX;
+			wallVerts[2].y = wallVerts[3].y = FLOATMAX; // draw to top of map space
 
 			auto draw_sky_walls = []
 			(int vert1, int vert2, fixed_t world, fixed_t worldslope, auto& wwallVerts, auto& sSurf) FUNCINLINE
@@ -1406,6 +1405,9 @@ void HWR_ProcessSeg(void) // Sort of like GLWall::Process in GZDoom
 				HWR_DrawSkyWall(wwallVerts, &sSurf);
 			};
 
+			// worldtop = front ceiling
+			// worldhigh = back ceiling
+
 			if (gl_frontsector->ceilingpic == skyflatnum)
 			{
 				if (gl_backsector->ceilingpic == skyflatnum)
@@ -1424,6 +1426,17 @@ void HWR_ProcessSeg(void) // Sort of like GLWall::Process in GZDoom
 					worldtop = worldhigh;
 					worldtopslope = worldhighslope;
 				}
+				else if (!gl_toptexture &&
+						 (worldhigh <= worldtop && worldhighslope <= worldtopslope) && // Assuming ESLOPE is always on with my changes
+						 (worldhigh != worldtop || worldhighslope != worldtopslope))
+				{
+					// Only the frontsector is sky.
+					// If there's no upper texture, extend the sky wall
+					// down to the lower of the two ceilings.
+					fixed_t top = std::min(worldtop, worldhigh);
+					fixed_t topslope = std::min(worldtopslope, worldhighslope);
+					draw_sky_walls(0, 1, top, topslope, wallVerts, Surf);
+				}
 				else
 				{
 					// Only the frontsector is sky, just draw a skywall from the front ceiling
@@ -1436,8 +1449,11 @@ void HWR_ProcessSeg(void) // Sort of like GLWall::Process in GZDoom
 				draw_sky_walls(0, 1, worldtop, worldtopslope, wallVerts, Surf);
 			}
 
+			// worldbottom = front floor
+			// worldlow = back floor
+
 			// Sky Floors
-			wallVerts[0].y = wallVerts[1].y = FLOATMIN;
+			wallVerts[0].y = wallVerts[1].y = FLOATMIN; // draw to bottom of map space
 
 			if (gl_frontsector->floorpic == skyflatnum)
 			{
@@ -1449,7 +1465,7 @@ void HWR_ProcessSeg(void) // Sort of like GLWall::Process in GZDoom
 					if ((worldlow >= worldbottom && worldlowslope >= worldbottomslope)
 					&& (worldlow != worldbottom || worldlowslope != worldbottomslope)
 					// Removing the second line above will render more rarely visible skywalls. Example: Cave garden ceiling in Dark race
-					&& !(gl_sidedef->bottomtexture))
+					&& !(gl_bottomtexture))
 					{
 						draw_sky_walls(3, 2, worldlow, worldlowslope, wallVerts, Surf);
 					}
@@ -1460,15 +1476,25 @@ void HWR_ProcessSeg(void) // Sort of like GLWall::Process in GZDoom
 					draw_sky_walls(3, 2, worldbottom, worldbottomslope, wallVerts, Surf);
 				}
 			}
-			else if ((gl_backsector->floorpic == skyflatnum) && !(gl_sidedef->bottomtexture))
+			else if ((gl_backsector->floorpic == skyflatnum) && !(gl_bottomtexture))
 			{
 				// Only the backsector has sky, just draw a skywall from the back floor if there's no bottomtexture
 				draw_sky_walls(3, 2, worldlow, worldlowslope, wallVerts, Surf);
 			}
+			else if (gl_frontsector->ceilingpic == skyflatnum &&
+					 gl_backsector->ceilingpic == skyflatnum &&
+					 (worldlow >= worldbottom && worldlowslope >= worldbottomslope)
+					 && (worldlow != worldbottom || worldlowslope != worldbottomslope)
+					 // Removing the second line above will render more rarely visible skywalls. Example: Cave garden ceiling in Dark race
+					 && !(gl_bottomtexture))
+			{
+				// Both ceilings are sky, but neither floor is sky.
+				// If there's a lower wall gap without a bottom texture,
+				// draw a skywall from the backsector's higher floor.
+				draw_sky_walls(3, 2, worldlow, worldlowslope, wallVerts, Surf);
+			}
 		}
 
-		gl_toptexture = R_GetTextureNum(gl_sidedef->toptexture);
-
 		// check TOP TEXTURE
 		if (gl_toptexture && (worldhighslope < worldtopslope || worldhigh < worldtop))
 		{
@@ -1532,8 +1558,6 @@ void HWR_ProcessSeg(void) // Sort of like GLWall::Process in GZDoom
 				HWR_ProjectWall(wallVerts, &Surf, PF_Masked, lightnum, colormap);
 		}
 
-		gl_bottomtexture = R_GetTextureNum(gl_sidedef->bottomtexture);
-
 		// check BOTTOM TEXTURE
 		if (gl_bottomtexture && (worldlowslope > worldbottomslope || worldlow > worldbottom))
 		{

src/p_setup.c

@@ -570,13 +570,13 @@ static void P_LoadSegs(UINT8 *data)
 
 			if (seg->sidedef == &sides[seg->linedef->sidenum[0]])
 			{
-				seg->v1 = lines[ms->linedef].v1;
-				seg->v2 = lines[ms->linedef].v2;
+				seg->v1 = lines[rawlinedef].v1;
+				seg->v2 = lines[rawlinedef].v2;
 			}
 			else
 			{
-				seg->v1 = lines[ms->linedef].v2;
-				seg->v2 = lines[ms->linedef].v1;
+				seg->v1 = lines[rawlinedef].v2;
+				seg->v2 = lines[rawlinedef].v1;
 			}
 		}
 		else
@@ -584,7 +584,6 @@ static void P_LoadSegs(UINT8 *data)
 			seg->v1 = &vertexes[v1];
 			seg->v2 = &vertexes[v2];
 		}
-
 #ifdef HWRENDER
 		if (rendermode == render_opengl)
 		{
@@ -597,7 +596,6 @@ static void P_LoadSegs(UINT8 *data)
 			//seg->fv2.z = FixedToFloat(seg->v2->z);
 		}
 #endif
-
 		seg->length = P_SegLength(seg);
 
 		P_UpdateSegLightOffset(seg);
@@ -2096,6 +2094,13 @@ static void P_LoadMapBSP(const virtres_t* virt)
 	virtlump_t* virtsegs     = vres_Find(virt, "SEGS");
 	virtlump_t* virtnodes    = vres_Find(virt, "NODES");
 
+	if (!virtssectors)
+		I_Error("SSECTORS lump not found");
+	if (!virtsegs)
+		I_Error("SEGS lump not found");
+	if (!virtnodes)
+		I_Error("NODES lump not found");
+
 	numsubsectors = virtssectors->size / sizeof(mapsubsector_t);
 	numnodes      = virtnodes->size    / sizeof(mapnode_t);
 	numsegs       = virtsegs->size     / sizeof(mapseg_t);

src/sdl/CMakeLists.txt

@@ -233,20 +233,25 @@ if(${SDL2_FOUND})
 		-DHAVE_THREADS
 	)
 
-	if(SRB2_CONFIG_LTO AND NOT SRB2_CONFIG_DEBUGMODE)
+	if(SRB2_CONFIG_LTO AND NOT SRB2_CONFIG_DEBUGMODE AND NOT SRB2_CONFIG_ASAN AND NOT SRB2_CONFIG_UBSAN AND NOT SRB2_CONFIG_TSAN)
 		set_property(TARGET SRB2SDL2 PROPERTY INTERPROCEDURAL_OPTIMIZATION TRUE)
 	endif()
 
 	if(SRB2_CONFIG_ASAN)
-		target_compile_options(SRB2SDL2 PRIVATE -fsanitize=address)
+		target_compile_options(SRB2SDL2 PRIVATE -O1 -fsanitize=address -fno-omit-frame-pointer -fno-common)
 		target_link_options(SRB2SDL2 PRIVATE -fsanitize=address)
 	endif()
 
 	if(SRB2_CONFIG_UBSAN)
-		target_compile_options(SRB2SDL2 PRIVATE -fsanitize=undefined)
+		target_compile_options(SRB2SDL2 PRIVATE -O1 -fsanitize=undefined -fno-omit-frame-pointer)
 		target_link_options(SRB2SDL2 PRIVATE -fsanitize=undefined)
 	endif()
 
+	if(SRB2_CONFIG_TSAN)
+		target_compile_options(SRB2SDL2 PRIVATE -O1 -fsanitize=thread -fno-omit-frame-pointer)
+		target_link_options(SRB2SDL2 PRIVATE -fsanitize=thread)
+	endif()
+
 	if(NOT SRB2_CONFIG_MUMBLE)
 		target_compile_options(SRB2SDL2 PRIVATE -DNOMUMBLE)
 	endif()