Clean up + optimize Software Plane Drawers, move Water drawers where they belong + Add support for tilted water #89

Closed
alufolie91 wants to merge 10 commits from planestuff into Saturn-Next
pull from: planestuff
7 changed files with 620 additions and 324 deletions

No files matched your search

+2 -2
View File
@@ -5945,8 +5945,8 @@ static void HWR_PortalClipping(gl_portal_t *portal)
line_t *line = &lines[portal->clipline];
angle1 = R_PointToAngleEx64(viewx, viewy, line->v1->x, line->v1->y);
angle2 = R_PointToAngleEx64(viewx, viewy, line->v2->x, line->v2->y);
angle1 = R_PointToAngleEx(viewx, viewy, line->v1->x, line->v1->y);
angle2 = R_PointToAngleEx(viewx, viewy, line->v2->x, line->v2->y);
// clip things that are not inside the portal window from our viewpoint
gld_clipper_SafeAddClipRange(angle2, angle1);
+4 -3
View File
@@ -110,11 +110,12 @@ INT32 ds_y, ds_x1, ds_x2;
lighttable_t *ds_colormap;
fixed_t ds_xfrac, ds_yfrac, ds_xstep, ds_ystep;
UINT8 *ds_source; // start of a 64*64 tile image
UINT8 *ds_source; // points to the start of a flat
UINT8 *ds_transmap; // one of the translucency tables
pslope_t *ds_slope; // Current slope being used
floatv3_t ds_su, ds_sv, ds_sz; // Vectors for... stuff?
// Vectors for Software's tilted slope drawers
floatv3_t *ds_su, *ds_sv, *ds_sz;
floatv3_t *ds_sup, *ds_svp, *ds_szp;
float focallengthf, zeroheight;
/** \brief Variable flat sizes
+6 -2
View File
@@ -60,6 +60,7 @@ extern INT32 dc_texheight;
extern INT32 ds_y, ds_x1, ds_x2;
extern lighttable_t *ds_colormap;
extern fixed_t ds_xfrac, ds_yfrac, ds_xstep, ds_ystep;
extern INT32 ds_waterofs, ds_bgofs;
extern UINT8 *ds_source; // start of a 64*64 tile image
extern UINT8 *ds_transmap;
@@ -69,8 +70,9 @@ typedef struct {
float x, y, z;
} floatv3_t;
extern pslope_t *ds_slope; // Current slope being used
extern floatv3_t ds_su, ds_sv, ds_sz; // Vectors for... stuff?
// Vectors for Software's tilted slope drawers
extern floatv3_t *ds_su, *ds_sv, *ds_sz;
extern floatv3_t *ds_sup, *ds_svp, *ds_szp;
extern float focallengthf, zeroheight;
// Variable flat sizes
@@ -153,10 +155,12 @@ void R_DrawSpan_8(void);
void R_CalcTiltedLighting(fixed_t start, fixed_t end);
void R_DrawTiltedSpan_8(void);
void R_DrawTiltedTranslucentSpan_8(void);
void R_DrawTiltedTranslucentWaterSpan_8(void);
void R_DrawTiltedSplat_8(void);
void R_DrawSplat_8(void);
void R_DrawTranslucentSplat_8(void);
void R_DrawTranslucentSpan_8(void);
void R_DrawTranslucentWaterSpan_8(void);
void R_Draw2sMultiPatchColumn_8(void);
void R_Draw2sMultiPatchTranslucentColumn_8(void);
void R_DrawFogSpan_8(void);
+254 -40
View File
@@ -644,7 +644,7 @@ void R_CalcTiltedLighting(fixed_t start, fixed_t end)
}
}
#define PLANELIGHTFLOAT (BASEVIDWIDTH * BASEVIDWIDTH / vid.width / (zeroheight - FIXED_TO_FLOAT(viewz)) / 21.0f * FIXED_TO_FLOAT(fovtan))
#define PLANELIGHTFLOAT (BASEVIDWIDTH * BASEVIDWIDTH / vid.width / zeroheight / 21.0f * FIXED_TO_FLOAT(fovtan))
/** \brief The R_DrawTiltedSpan_8 function
Draw slopes! Holy sheit!
@@ -666,22 +666,22 @@ void R_DrawTiltedSpan_8(void)
double endz, endu, endv;
UINT32 stepu, stepv;
iz = ds_sz.z + ds_sz.y*(centery-ds_y) + ds_sz.x*(ds_x1-centerx);
iz = ds_szp->z + ds_szp->y*(centery-ds_y) + ds_szp->x*(ds_x1-centerx);
// Lighting is simple. It's just linear interpolation from start to end
{
float planelightfloat = PLANELIGHTFLOAT;
float lightstart, lightend;
lightend = (iz + ds_sz.x*width) * planelightfloat;
lightend = (iz + ds_szp->x*width) * planelightfloat;
lightstart = iz * planelightfloat;
R_CalcTiltedLighting(FLOAT_TO_FIXED(lightstart), FLOAT_TO_FIXED(lightend));
//CONS_Printf("tilted lighting %f to %f (foc %f)\n", lightstart, lightend, focallengthf);
}
uz = ds_su.z + ds_su.y*(centery-ds_y) + ds_su.x*(ds_x1-centerx);
vz = ds_sv.z + ds_sv.y*(centery-ds_y) + ds_sv.x*(ds_x1-centerx);
uz = ds_sup->z + ds_sup->y*(centery-ds_y) + ds_sup->x*(ds_x1-centerx);
vz = ds_svp->z + ds_svp->y*(centery-ds_y) + ds_svp->x*(ds_x1-centerx);
dest = ylookup[ds_y] + columnofs[ds_x1];
source = ds_source;
@@ -700,9 +700,9 @@ void R_DrawTiltedSpan_8(void)
*dest = colormap[source[((v >> nflatyshift) & nflatmask) | (u >> nflatxshift)]];
dest++;
iz += ds_sz.x;
uz += ds_su.x;
vz += ds_sv.x;
iz += ds_szp->x;
uz += ds_sup->x;
vz += ds_svp->x;
} while (--width >= 0);
#else
#define SPANSIZE 16
@@ -712,9 +712,9 @@ void R_DrawTiltedSpan_8(void)
startu = uz*startz;
startv = vz*startz;
izstep = ds_sz.x * SPANSIZE;
uzstep = ds_su.x * SPANSIZE;
vzstep = ds_sv.x * SPANSIZE;
izstep = ds_szp->x * SPANSIZE;
uzstep = ds_sup->x * SPANSIZE;
vzstep = ds_svp->x * SPANSIZE;
//x1 = 0;
width++;
@@ -756,9 +756,9 @@ void R_DrawTiltedSpan_8(void)
else
{
double left = width;
iz += ds_sz.x * left;
uz += ds_su.x * left;
vz += ds_sv.x * left;
iz += ds_szp->x * left;
uz += ds_sup->x * left;
vz += ds_svp->x * left;
endz = 1.f/iz;
endu = uz*endz;
@@ -802,22 +802,22 @@ void R_DrawTiltedTranslucentSpan_8(void)
double endz, endu, endv;
UINT32 stepu, stepv;
iz = ds_sz.z + ds_sz.y*(centery-ds_y) + ds_sz.x*(ds_x1-centerx);
iz = ds_szp->z + ds_szp->y*(centery-ds_y) + ds_szp->x*(ds_x1-centerx);
// Lighting is simple. It's just linear interpolation from start to end
{
float planelightfloat = PLANELIGHTFLOAT;
float lightstart, lightend;
lightend = (iz + ds_sz.x*width) * planelightfloat;
lightend = (iz + ds_szp->x*width) * planelightfloat;
lightstart = iz * planelightfloat;
R_CalcTiltedLighting(FLOAT_TO_FIXED(lightstart), FLOAT_TO_FIXED(lightend));
//CONS_Printf("tilted lighting %f to %f (foc %f)\n", lightstart, lightend, focallengthf);
}
uz = ds_su.z + ds_su.y*(centery-ds_y) + ds_su.x*(ds_x1-centerx);
vz = ds_sv.z + ds_sv.y*(centery-ds_y) + ds_sv.x*(ds_x1-centerx);
uz = ds_sup->z + ds_sup->y*(centery-ds_y) + ds_sup->x*(ds_x1-centerx);
vz = ds_svp->z + ds_svp->y*(centery-ds_y) + ds_svp->x*(ds_x1-centerx);
dest = ylookup[ds_y] + columnofs[ds_x1];
source = ds_source;
@@ -835,9 +835,9 @@ void R_DrawTiltedTranslucentSpan_8(void)
colormap = planezlight[tiltlighting[ds_x1++]] + (ds_colormap - colormaps);
*dest = *(ds_transmap + (colormap[source[((v >> nflatyshift) & nflatmask) | (u >> nflatxshift)]] << 8) + *dest);
dest++;
iz += ds_sz.x;
uz += ds_su.x;
vz += ds_sv.x;
iz += ds_szp->x;
uz += ds_sup->x;
vz += ds_svp->x;
} while (--width >= 0);
#else
#define SPANSIZE 16
@@ -847,9 +847,9 @@ void R_DrawTiltedTranslucentSpan_8(void)
startu = uz*startz;
startv = vz*startz;
izstep = ds_sz.x * SPANSIZE;
uzstep = ds_su.x * SPANSIZE;
vzstep = ds_sv.x * SPANSIZE;
izstep = ds_szp->x * SPANSIZE;
uzstep = ds_sup->x * SPANSIZE;
vzstep = ds_svp->x * SPANSIZE;
//x1 = 0;
width++;
@@ -891,9 +891,9 @@ void R_DrawTiltedTranslucentSpan_8(void)
else
{
double left = width;
iz += ds_sz.x * left;
uz += ds_su.x * left;
vz += ds_sv.x * left;
iz += ds_szp->x * left;
uz += ds_sup->x * left;
vz += ds_svp->x * left;
endz = 1.f/iz;
endu = uz*endz;
@@ -917,6 +917,143 @@ void R_DrawTiltedTranslucentSpan_8(void)
#endif
}
/** \brief The R_DrawTiltedTranslucentWaterSpan_8 function
Like DrawTiltedTranslucentSpan, but for water
*/
void R_DrawTiltedTranslucentWaterSpan_8(void)
{
// x1, x2 = ds_x1, ds_x2
int width = ds_x2 - ds_x1;
double iz, uz, vz;
UINT32 u, v;
int i;
UINT8 *source;
UINT8 *colormap;
UINT8 *dest;
UINT8 *dsrc;
double startz, startu, startv;
double izstep, uzstep, vzstep;
double endz, endu, endv;
UINT32 stepu, stepv;
iz = ds_szp->z + ds_szp->y*(centery-ds_y) + ds_szp->x*(ds_x1-centerx);
// Lighting is simple. It's just linear interpolation from start to end
{
float planelightfloat = BASEVIDWIDTH*BASEVIDWIDTH/vid.width / (zeroheight - FIXED_TO_FLOAT(viewz)) / 21.0f;
float lightstart, lightend;
lightend = (iz + ds_szp->x*width) * planelightfloat;
lightstart = iz * planelightfloat;
R_CalcTiltedLighting(FLOAT_TO_FIXED(lightstart), FLOAT_TO_FIXED(lightend));
//CONS_Printf("tilted lighting %f to %f (foc %f)\n", lightstart, lightend, focallengthf);
}
uz = ds_sup->z + ds_sup->y*(centery-ds_y) + ds_sup->x*(ds_x1-centerx);
vz = ds_svp->z + ds_svp->y*(centery-ds_y) + ds_svp->x*(ds_x1-centerx);
dest = ylookup[ds_y] + columnofs[ds_x1];
dsrc = screens[1] + (ds_y+ds_bgofs)*vid.width + ds_x1;
source = ds_source;
//colormap = ds_colormap;
#if 0 // The "perfect" reference version of this routine. Pretty slow.
// Use it only to see how things are supposed to look.
i = 0;
do
{
double z = 1.f/iz;
u = (INT64)(uz*z) + viewx;
v = (INT64)(vz*z) + viewy;
colormap = planezlight[tiltlighting[ds_x1++]] + (ds_colormap - colormaps);
*dest = *(ds_transmap + (colormap[source[((v >> nflatyshift) & nflatmask) | (u >> nflatxshift)]] << 8) + *dsrc++);
dest++;
iz += ds_szp->x;
uz += ds_sup->x;
vz += ds_svp->x;
} while (--width >= 0);
#else
#define SPANSIZE 16
#define INVSPAN 0.0625f
startz = 1.f/iz;
startu = uz*startz;
startv = vz*startz;
izstep = ds_szp->x * SPANSIZE;
uzstep = ds_sup->x * SPANSIZE;
vzstep = ds_svp->x * SPANSIZE;
//x1 = 0;
width++;
while (width >= SPANSIZE)
{
iz += izstep;
uz += uzstep;
vz += vzstep;
endz = 1.f/iz;
endu = uz*endz;
endv = vz*endz;
stepu = (INT64)((endu - startu) * INVSPAN);
stepv = (INT64)((endv - startv) * INVSPAN);
u = (INT64)(startu) + viewx;
v = (INT64)(startv) + viewy;
for (i = SPANSIZE-1; i >= 0; i--)
{
colormap = planezlight[tiltlighting[ds_x1++]] + (ds_colormap - colormaps);
*dest = *(ds_transmap + (colormap[source[((v >> nflatyshift) & nflatmask) | (u >> nflatxshift)]] << 8) + *dsrc++);
dest++;
u += stepu;
v += stepv;
}
startu = endu;
startv = endv;
width -= SPANSIZE;
}
if (width > 0)
{
if (width == 1)
{
u = (INT64)(startu);
v = (INT64)(startv);
colormap = planezlight[tiltlighting[ds_x1++]] + (ds_colormap - colormaps);
*dest = *(ds_transmap + (colormap[source[((v >> nflatyshift) & nflatmask) | (u >> nflatxshift)]] << 8) + *dsrc++);
}
else
{
double left = width;
iz += ds_szp->x * left;
uz += ds_sup->x * left;
vz += ds_svp->x * left;
endz = 1.f/iz;
endu = uz*endz;
endv = vz*endz;
left = 1.f/left;
stepu = (INT64)((endu - startu) * left);
stepv = (INT64)((endv - startv) * left);
u = (INT64)(startu) + viewx;
v = (INT64)(startv) + viewy;
for (; width != 0; width--)
{
colormap = planezlight[tiltlighting[ds_x1++]] + (ds_colormap - colormaps);
*dest = *(ds_transmap + (colormap[source[((v >> nflatyshift) & nflatmask) | (u >> nflatxshift)]] << 8) + *dsrc++);
dest++;
u += stepu;
v += stepv;
}
}
}
#endif
}
void R_DrawTiltedSplat_8(void)
{
// x1, x2 = ds_x1, ds_x2
@@ -936,22 +1073,22 @@ void R_DrawTiltedSplat_8(void)
double endz, endu, endv;
UINT32 stepu, stepv;
iz = ds_sz.z + ds_sz.y*(centery-ds_y) + ds_sz.x*(ds_x1-centerx);
iz = ds_szp->z + ds_szp->y*(centery-ds_y) + ds_szp->x*(ds_x1-centerx);
// Lighting is simple. It's just linear interpolation from start to end
{
float planelightfloat = PLANELIGHTFLOAT;
float lightstart, lightend;
lightend = (iz + ds_sz.x*width) * planelightfloat;
lightend = (iz + ds_szp->x*width) * planelightfloat;
lightstart = iz * planelightfloat;
R_CalcTiltedLighting(FLOAT_TO_FIXED(lightstart), FLOAT_TO_FIXED(lightend));
//CONS_Printf("tilted lighting %f to %f (foc %f)\n", lightstart, lightend, focallengthf);
}
uz = ds_su.z + ds_su.y*(centery-ds_y) + ds_su.x*(ds_x1-centerx);
vz = ds_sv.z + ds_sv.y*(centery-ds_y) + ds_sv.x*(ds_x1-centerx);
uz = ds_sup->z + ds_sup->y*(centery-ds_y) + ds_sup->x*(ds_x1-centerx);
vz = ds_svp->z + ds_svp->y*(centery-ds_y) + ds_svp->x*(ds_x1-centerx);
dest = ylookup[ds_y] + columnofs[ds_x1];
source = ds_source;
@@ -972,9 +1109,9 @@ void R_DrawTiltedSplat_8(void)
if (val != TRANSPARENTPIXEL)
*dest = colormap[val];
dest++;
iz += ds_sz.x;
uz += ds_su.x;
vz += ds_sv.x;
iz += ds_szp->x;
uz += ds_sup->x;
vz += ds_svp->x;
} while (--width >= 0);
#else
#define SPANSIZE 16
@@ -984,9 +1121,9 @@ void R_DrawTiltedSplat_8(void)
startu = uz*startz;
startv = vz*startz;
izstep = ds_sz.x * SPANSIZE;
uzstep = ds_su.x * SPANSIZE;
vzstep = ds_sv.x * SPANSIZE;
izstep = ds_szp->x * SPANSIZE;
uzstep = ds_sup->x * SPANSIZE;
vzstep = ds_svp->x * SPANSIZE;
//x1 = 0;
width++;
@@ -1032,9 +1169,9 @@ void R_DrawTiltedSplat_8(void)
else
{
double left = width;
iz += ds_sz.x * left;
uz += ds_su.x * left;
vz += ds_sv.x * left;
iz += ds_szp->x * left;
uz += ds_sup->x * left;
vz += ds_svp->x * left;
endz = 1.f/iz;
endu = uz*endz;
@@ -1362,6 +1499,83 @@ void R_DrawTranslucentSpan_8 (void)
}
}
void R_DrawTranslucentWaterSpan_8(void)
{
UINT32 xposition;
UINT32 yposition;
UINT32 xstep, ystep;
UINT8 *source;
UINT8 *colormap;
UINT8 *dest;
UINT8 *dsrc;
size_t count;
// SoM: we only need 6 bits for the integer part (0 thru 63) so the rest
// can be used for the fraction part. This allows calculation of the memory address in the
// texture with two shifts, an OR and one AND. (see below)
// for texture sizes > 64 the amount of precision we can allow will decrease, but only by one
// bit per power of two (obviously)
// Ok, because I was able to eliminate the variable spot below, this function is now FASTER
// than the original span renderer. Whodathunkit?
xposition = ds_xfrac << nflatshiftup; yposition = (ds_yfrac + ds_waterofs) << nflatshiftup;
xstep = ds_xstep << nflatshiftup; ystep = ds_ystep << nflatshiftup;
source = ds_source;
colormap = ds_colormap;
dest = ylookup[ds_y] + columnofs[ds_x1];
dsrc = screens[1] + (ds_y+ds_bgofs)*vid.width + ds_x1;
count = ds_x2 - ds_x1 + 1;
while (count >= 8)
{
// SoM: Why didn't I see this earlier? the spot variable is a waste now because we don't
// have the uber complicated math to calculate it now, so that was a memory write we didn't
// need!
dest[0] = colormap[*(ds_transmap + (source[((yposition >> nflatyshift) & nflatmask) | (xposition >> nflatxshift)] << 8) + *dsrc++)];
xposition += xstep;
yposition += ystep;
dest[1] = colormap[*(ds_transmap + (source[((yposition >> nflatyshift) & nflatmask) | (xposition >> nflatxshift)] << 8) + *dsrc++)];
xposition += xstep;
yposition += ystep;
dest[2] = colormap[*(ds_transmap + (source[((yposition >> nflatyshift) & nflatmask) | (xposition >> nflatxshift)] << 8) + *dsrc++)];
xposition += xstep;
yposition += ystep;
dest[3] = colormap[*(ds_transmap + (source[((yposition >> nflatyshift) & nflatmask) | (xposition >> nflatxshift)] << 8) + *dsrc++)];
xposition += xstep;
yposition += ystep;
dest[4] = colormap[*(ds_transmap + (source[((yposition >> nflatyshift) & nflatmask) | (xposition >> nflatxshift)] << 8) + *dsrc++)];
xposition += xstep;
yposition += ystep;
dest[5] = colormap[*(ds_transmap + (source[((yposition >> nflatyshift) & nflatmask) | (xposition >> nflatxshift)] << 8) + *dsrc++)];
xposition += xstep;
yposition += ystep;
dest[6] = colormap[*(ds_transmap + (source[((yposition >> nflatyshift) & nflatmask) | (xposition >> nflatxshift)] << 8) + *dsrc++)];
xposition += xstep;
yposition += ystep;
dest[7] = colormap[*(ds_transmap + (source[((yposition >> nflatyshift) & nflatmask) | (xposition >> nflatxshift)] << 8) + *dsrc++)];
xposition += xstep;
yposition += ystep;
dest += 8;
count -= 8;
}
while (count--)
{
*dest++ = colormap[*(ds_transmap + (source[((yposition >> nflatyshift) & nflatmask) | (xposition >> nflatxshift)] << 8) + *dsrc++)];
xposition += xstep;
yposition += ystep;
}
}
/** \brief The R_DrawFogSpan_8 function
Draws the actual span with fogging.
*/
+10
View File
@@ -1060,6 +1060,16 @@ void R_ExecuteSetViewSize(void)
dy = FixedMul(abs(dy), fovtan);
yslopetab[i] = FixedDiv(centerx*FRACUNIT, dy);
}
if (ds_su)
Z_Free(ds_su);
if (ds_sv)
Z_Free(ds_sv);
if (ds_sz)
Z_Free(ds_sz);
ds_su = ds_sv = ds_sz = NULL;
ds_sup = ds_svp = ds_szp = NULL;
}
memset(scalelight, 0xFF, sizeof(scalelight));
+336 -275
View File
@@ -102,6 +102,7 @@ fixed_t cachedxstep[MAXVIDHEIGHT];
fixed_t cachedystep[MAXVIDHEIGHT];
static fixed_t xoffs, yoffs;
static floatv3_t ds_slope_origin, ds_slope_u, ds_slope_v;
//
// R_InitPlanes
@@ -156,6 +157,44 @@ void R_PortalRestoreClipValues(INT32 start, INT32 end, INT16 *ceil, INT16 *floor
}
}
//
// Water ripple effect!!
// Needs the height of the plane, and the vertical position of the span.
// Sets planeripple.xfrac and planeripple.yfrac, added to ds_xfrac and ds_yfrac, if the span is not tilted.
//
INT32 ds_bgofs;
INT32 ds_waterofs;
struct
{
INT32 offset;
fixed_t xfrac, yfrac;
boolean active;
} planeripple;
// ripples da water texture
static fixed_t R_CalculateRippleOffset(INT32 y)
{
fixed_t distance = FixedMul(planeheight, yslope[y]);
const INT32 yay = (planeripple.offset + (distance>>9)) & 8191;
return FixedDiv(FINESINE(yay), (1<<12) + (distance>>11));
}
static void R_CalculatePlaneRipple(angle_t angle)
{
angle >>= ANGLETOFINESHIFT;
angle = (angle + 2048) & 8191; // 90 degrees
planeripple.xfrac = FixedMul(FINECOSINE(angle), ds_bgofs);
planeripple.yfrac = FixedMul(FINESINE(angle), ds_bgofs);
}
static void R_UpdatePlaneRipple(void)
{
ds_waterofs = (leveltime & 1)*16384;
planeripple.offset = ((leveltime-1)*140) + ((rendertimefrac*140) / FRACUNIT);
}
//
// R_MapPlane
//
@@ -168,97 +207,10 @@ void R_PortalRestoreClipValues(INT32 start, INT32 end, INT16 *ceil, INT16 *floor
// viewsin
// viewcos
// viewheight
#ifndef NOWATER
INT32 ds_bgofs;
static INT32 wtofs=0;
static INT32 waterofs;
static boolean itswater;
#endif
#ifndef NOWATER
static void R_DrawTranslucentWaterSpan_8(void)
{
UINT32 xposition;
UINT32 yposition;
UINT32 xstep, ystep;
UINT8 *source;
UINT8 *colormap;
UINT8 *dest;
UINT8 *dsrc;
size_t count;
// SoM: we only need 6 bits for the integer part (0 thru 63) so the rest
// can be used for the fraction part. This allows calculation of the memory address in the
// texture with two shifts, an OR and one AND. (see below)
// for texture sizes > 64 the amount of precision we can allow will decrease, but only by one
// bit per power of two (obviously)
// Ok, because I was able to eliminate the variable spot below, this function is now FASTER
// than the original span renderer. Whodathunkit?
xposition = ds_xfrac << nflatshiftup; yposition = (ds_yfrac + waterofs) << nflatshiftup;
xstep = ds_xstep << nflatshiftup; ystep = ds_ystep << nflatshiftup;
source = ds_source;
colormap = ds_colormap;
dest = ylookup[ds_y] + columnofs[ds_x1];
dsrc = screens[1] + (ds_y+ds_bgofs)*vid.width + ds_x1;
count = ds_x2 - ds_x1 + 1;
while (count >= 8)
{
// SoM: Why didn't I see this earlier? the spot variable is a waste now because we don't
// have the uber complicated math to calculate it now, so that was a memory write we didn't
// need!
dest[0] = colormap[*(ds_transmap + (source[((yposition >> nflatyshift) & nflatmask) | (xposition >> nflatxshift)] << 8) + *dsrc++)];
xposition += xstep;
yposition += ystep;
dest[1] = colormap[*(ds_transmap + (source[((yposition >> nflatyshift) & nflatmask) | (xposition >> nflatxshift)] << 8) + *dsrc++)];
xposition += xstep;
yposition += ystep;
dest[2] = colormap[*(ds_transmap + (source[((yposition >> nflatyshift) & nflatmask) | (xposition >> nflatxshift)] << 8) + *dsrc++)];
xposition += xstep;
yposition += ystep;
dest[3] = colormap[*(ds_transmap + (source[((yposition >> nflatyshift) & nflatmask) | (xposition >> nflatxshift)] << 8) + *dsrc++)];
xposition += xstep;
yposition += ystep;
dest[4] = colormap[*(ds_transmap + (source[((yposition >> nflatyshift) & nflatmask) | (xposition >> nflatxshift)] << 8) + *dsrc++)];
xposition += xstep;
yposition += ystep;
dest[5] = colormap[*(ds_transmap + (source[((yposition >> nflatyshift) & nflatmask) | (xposition >> nflatxshift)] << 8) + *dsrc++)];
xposition += xstep;
yposition += ystep;
dest[6] = colormap[*(ds_transmap + (source[((yposition >> nflatyshift) & nflatmask) | (xposition >> nflatxshift)] << 8) + *dsrc++)];
xposition += xstep;
yposition += ystep;
dest[7] = colormap[*(ds_transmap + (source[((yposition >> nflatyshift) & nflatmask) | (xposition >> nflatxshift)] << 8) + *dsrc++)];
xposition += xstep;
yposition += ystep;
dest += 8;
count -= 8;
}
while (count--)
{
*dest++ = colormap[*(ds_transmap + (source[((yposition >> nflatyshift) & nflatmask) | (xposition >> nflatxshift)] << 8) + *dsrc++)];
xposition += xstep;
yposition += ystep;
}
}
#endif
void R_MapPlane(INT32 y, INT32 x1, INT32 x2)
static void R_MapPlane(INT32 y, INT32 x1, INT32 x2)
{
angle_t angle, planecos, planesin;
fixed_t distance, span;
fixed_t distance = 0, span;
size_t pindex;
#ifdef RANGECHECK
@@ -266,8 +218,8 @@ void R_MapPlane(INT32 y, INT32 x1, INT32 x2)
I_Error("R_MapPlane: %d, %d at %d", x1, x2, y);
#endif
// from r_splats's R_RenderFloorSplat
if (x1 >= vid.width) x1 = vid.width - 1;
if (x1 >= vid.width)
x1 = vid.width - 1;
angle = (currentplane->viewangle + currentplane->plangle)>>ANGLETOFINESHIFT;
planecos = FINECOSINE(angle);
@@ -276,15 +228,22 @@ void R_MapPlane(INT32 y, INT32 x1, INT32 x2)
if (planeheight != cachedheight[y])
{
cachedheight[y] = planeheight;
distance = cacheddistance[y] = FixedMul(planeheight, yslope[y]);
ds_xstep = cachedxstep[y] = FixedMul(distance, basexscale);
ds_ystep = cachedystep[y] = FixedMul(distance, baseyscale);
cacheddistance[y] = distance = FixedMul(planeheight, yslope[y]);
span = abs(centery - y);
if ((span = abs(centery-y)))
if (span) // don't divide by zero
{
ds_xstep = cachedxstep[y] = FixedMul(planesin, planeheight) / span;
ds_ystep = cachedystep[y] = FixedMul(planecos, planeheight) / span;
ds_xstep = FixedMul(planesin, planeheight) / span;
ds_ystep = FixedMul(planecos, planeheight) / span;
}
else
{
ds_xstep = FixedMul(distance, basexscale);
ds_ystep = FixedMul(distance, baseyscale);
}
cachedxstep[y] = ds_xstep;
cachedystep[y] = ds_ystep;
}
else
{
@@ -296,33 +255,29 @@ void R_MapPlane(INT32 y, INT32 x1, INT32 x2)
ds_xfrac = xoffs + FixedMul(planecos, distance) + (x1 - centerx) * ds_xstep;
ds_yfrac = yoffs - FixedMul(planesin, distance) + (x1 - centerx) * ds_ystep;
#ifndef NOWATER
if (itswater)
// Water ripple effect
if (planeripple.active)
{
const INT32 yay = (wtofs + (distance>>9) ) & 8191;
// ripples da water texture
ds_bgofs = FixedDiv(FINESINE(yay), (1<<12) + (distance>>11))>>FRACBITS;
angle = (currentplane->viewangle + currentplane->plangle + xtoviewangle[x1])>>ANGLETOFINESHIFT;
ds_bgofs = R_CalculateRippleOffset(y);
angle = (angle + 2048) & 8191; // 90 degrees
ds_xfrac += FixedMul(FINECOSINE(angle), (ds_bgofs<<FRACBITS));
ds_yfrac += FixedMul(FINESINE(angle), (ds_bgofs<<FRACBITS));
R_CalculatePlaneRipple(currentplane->viewangle + currentplane->plangle);
if (y+ds_bgofs>=viewheight)
ds_xfrac += planeripple.xfrac;
ds_yfrac += planeripple.yfrac;
ds_bgofs >>= FRACBITS;
if ((y + ds_bgofs) >= viewheight)
ds_bgofs = viewheight-y-1;
if (y+ds_bgofs<0)
if ((y + ds_bgofs) < 0)
ds_bgofs = -y;
}
#endif
pindex = distance >> LIGHTZSHIFT;
if (pindex >= MAXLIGHTZ)
pindex = MAXLIGHTZ - 1;
if (currentplane->slope)
ds_colormap = colormaps;
else
ds_colormap = planezlight[pindex];
if (encoremap && !currentplane->noencore)
ds_colormap += (256*32);
@@ -336,6 +291,48 @@ void R_MapPlane(INT32 y, INT32 x1, INT32 x2)
spanfunc();
}
static void R_MapTiltedPlane(INT32 y, INT32 x1, INT32 x2)
{
#ifdef RANGECHECK
if (x2 < x1 || x1 < 0 || x2 >= viewwidth || y > viewheight)
I_Error("R_MapTiltedPlane: %d, %d at %d", x1, x2, y);
#endif
if (x1 >= vid.width)
x1 = vid.width - 1;
// Water ripple effect
if (planeripple.active)
{
ds_bgofs = R_CalculateRippleOffset(y);
ds_sup = &ds_su[y];
ds_svp = &ds_sv[y];
ds_szp = &ds_sz[y];
ds_bgofs >>= FRACBITS;
if ((y + ds_bgofs) >= viewheight)
ds_bgofs = viewheight-y-1;
if ((y + ds_bgofs) < 0)
ds_bgofs = -y;
}
if (encoremap && !currentplane->noencore)
ds_colormap += (256*32);
if (currentplane->extra_colormap)
ds_colormap = currentplane->extra_colormap->colormap;
else
ds_colormap = colormaps;
ds_y = y;
ds_x1 = x1;
ds_x2 = x2;
spanfunc();
}
//
// R_ClearPlanes
// At begining of frame.
@@ -385,7 +382,7 @@ static visplane_t *new_visplane(unsigned hash)
visplane_t *check = freetail;
if (!check)
{
check = calloc(1, sizeof (*check));
check = malloc(sizeof (*check));
if (check == NULL) I_Error("%s: Out of memory", "new_visplane"); // FIXME: ugly
}
else
@@ -421,11 +418,11 @@ visplane_t *R_FindPlane(fixed_t height, INT32 picnum, INT32 lightlevel,
if (plangle != 0)
{
// Add the view offset, rotated by the plane angle.
fixed_t cosinecomponent = FINECOSINE(plangle>>ANGLETOFINESHIFT);
fixed_t sinecomponent = FINESINE(plangle>>ANGLETOFINESHIFT);
fixed_t oldxoff = xoff;
xoff = FixedMul(xoff,cosinecomponent)+FixedMul(yoff,sinecomponent);
yoff = -FixedMul(oldxoff,sinecomponent)+FixedMul(yoff,cosinecomponent);
float ang = ANG2RAD(plangle);
float x = FixedToFloat(xoff);
float y = FixedToFloat(yoff);
xoff = FloatToFixed(x * cos(ang) + y * sin(ang));
yoff = FloatToFixed(-x * sin(ang) + y * cos(ang));
}
}
@@ -630,10 +627,7 @@ void R_ExpandPlane(visplane_t *pl, INT32 start, INT32 stop)
pl->minx = unionl, pl->maxx = unionh;
}
//
// R_MakeSpans
//
void R_MakeSpans(INT32 x, INT32 t1, INT32 b1, INT32 t2, INT32 b2)
static void R_MakeSpans(INT32 x, INT32 t1, INT32 b1, INT32 t2, INT32 b2)
{
// Alam: from r_splats's R_RenderFloorSplat
if (t1 >= vid.height) t1 = vid.height-1;
@@ -659,6 +653,32 @@ void R_MakeSpans(INT32 x, INT32 t1, INT32 b1, INT32 t2, INT32 b2)
spanstart[b2--] = x;
}
static void R_MakeTiltedSpans(INT32 x, INT32 t1, INT32 b1, INT32 t2, INT32 b2)
{
// Alam: from r_splats's R_RasterizeFloorSplat
if (t1 >= vid.height) t1 = vid.height-1;
if (b1 >= vid.height) b1 = vid.height-1;
if (t2 >= vid.height) t2 = vid.height-1;
if (b2 >= vid.height) b2 = vid.height-1;
if (x-1 >= vid.width) x = vid.width;
while (t1 < t2 && t1 <= b1)
{
R_MapTiltedPlane(t1, spanstart[t1], x - 1);
t1++;
}
while (b1 > b2 && b1 >= t1)
{
R_MapTiltedPlane(b1, spanstart[b1], x - 1);
b1--;
}
while (t2 < t1 && t2 <= b2)
spanstart[t2++] = x;
while (b2 > b1 && b2 >= t2)
spanstart[b2--] = x;
}
void R_DrawPlanes(void)
{
visplane_t *pl;
@@ -666,6 +686,7 @@ void R_DrawPlanes(void)
spanfunc = basespanfunc;
wallcolfunc = walldrawerfunc;
R_UpdatePlaneRipple();
for (i = 0; i < MAXVISPLANES; i++, pl++)
{
@@ -677,10 +698,6 @@ void R_DrawPlanes(void)
R_DrawSinglePlane(pl);
}
}
#ifndef NOWATER
waterofs = (leveltime & 1)*16384;
wtofs = ((leveltime-1)*140) + ((rendertimefrac*140) / FRACUNIT);
#endif
}
static void R_DrawSkyPlane(visplane_t *pl)
@@ -725,6 +742,161 @@ static void R_DrawSkyPlane(visplane_t *pl)
}
}
// Returns the height of the sloped plane at (x, y) as a 32.16 fixed_t
static INT64 R_GetSlopeZAt(const pslope_t *slope, fixed_t x, fixed_t y)
{
INT64 x64 = ((INT64)x - (INT64)slope->o.x);
INT64 y64 = ((INT64)y - (INT64)slope->o.y);
x64 = (x64 * (INT64)slope->d.x) / FRACUNIT;
y64 = (y64 * (INT64)slope->d.y) / FRACUNIT;
return (INT64)slope->o.z + ((x64 + y64) * (INT64)slope->zdelta) / FRACUNIT;
}
// Sets the texture origin vector of the sloped plane.
static void R_SetSlopePlaneOrigin(pslope_t *slope, fixed_t xpos, fixed_t ypos, fixed_t zpos, fixed_t xoff, fixed_t yoff, fixed_t angle)
{
floatv3_t *p = &ds_slope_origin;
INT64 vx = (INT64)xpos + (INT64)xoff;
INT64 vy = (INT64)ypos - (INT64)yoff;
float vxf = vx / (float)FRACUNIT;
float vyf = vy / (float)FRACUNIT;
float ang = ANG2RAD(ANGLE_270 - angle);
// p is the texture origin in view space
// Don't add in the offsets at this stage, because doing so can result in
// errors if the flat is rotated.
p->x = vxf * cos(ang) - vyf * sin(ang);
p->z = vxf * sin(ang) + vyf * cos(ang);
p->y = (R_GetSlopeZAt(slope, -xoff, yoff) - zpos) / (float)FRACUNIT;
}
// This function calculates all of the vectors necessary for drawing a sloped plane.
void R_SetSlopePlane(pslope_t *slope, fixed_t xpos, fixed_t ypos, fixed_t zpos, fixed_t xoff, fixed_t yoff, angle_t angle, angle_t plangle)
{
// Potentially override other stuff for now cus we're mean. :< But draw a slope plane!
// I copied ZDoom's code and adapted it to SRB2... -Red
floatv3_t *m = &ds_slope_v, *n = &ds_slope_u;
fixed_t height, temp;
float ang;
R_SetSlopePlaneOrigin(slope, xpos, ypos, zpos, xoff, yoff, angle);
height = P_GetZAt(slope, xpos, ypos);
zeroheight = FixedToFloat(height - zpos);
// m is the v direction vector in view space
ang = ANG2RAD(ANGLE_180 - (angle + plangle));
m->x = cos(ang);
m->z = sin(ang);
// n is the u direction vector in view space
n->x = sin(ang);
n->z = -cos(ang);
plangle >>= ANGLETOFINESHIFT;
temp = P_GetZAt(slope, xpos + FINESINE(plangle), ypos + FINECOSINE(plangle));
m->y = FixedToFloat(temp - height);
temp = P_GetZAt(slope, xpos + FINECOSINE(plangle), ypos - FINESINE(plangle));
n->y = FixedToFloat(temp - height);
}
// This function calculates all of the vectors necessary for drawing a sloped and scaled plane.
void R_SetScaledSlopePlane(pslope_t *slope, fixed_t xpos, fixed_t ypos, fixed_t zpos, fixed_t xs, fixed_t ys, fixed_t xoff, fixed_t yoff, angle_t angle, angle_t plangle)
{
floatv3_t *m = &ds_slope_v, *n = &ds_slope_u;
fixed_t height, temp;
float xscale = FixedToFloat(xs);
float yscale = FixedToFloat(ys);
float ang;
R_SetSlopePlaneOrigin(slope, xpos, ypos, zpos, xoff, yoff, angle);
height = P_GetZAt(slope, xpos, ypos);
zeroheight = FixedToFloat(height - zpos);
// m is the v direction vector in view space
ang = ANG2RAD(ANGLE_180 - (angle + plangle));
m->x = yscale * cos(ang);
m->z = yscale * sin(ang);
// n is the u direction vector in view space
n->x = xscale * sin(ang);
n->z = -xscale * cos(ang);
ang = ANG2RAD(plangle);
temp = P_GetZAt(slope, xpos + FloatToFixed(yscale * sin(ang)), ypos + FloatToFixed(yscale * cos(ang)));
m->y = FixedToFloat(temp - height);
temp = P_GetZAt(slope, xpos + FloatToFixed(xscale * cos(ang)), ypos - FloatToFixed(xscale * sin(ang)));
n->y = FixedToFloat(temp - height);
}
void R_CalculateSlopeVectors(void)
{
float sfmult = 65536.f;
// Eh. I tried making this stuff fixed-point and it exploded on me. Here's a macro for the only floating-point vector function I recall using.
#define CROSS(d, v1, v2) \
d->x = (v1.y * v2.z) - (v1.z * v2.y);\
d->y = (v1.z * v2.x) - (v1.x * v2.z);\
d->z = (v1.x * v2.y) - (v1.y * v2.x)
CROSS(ds_sup, ds_slope_origin, ds_slope_v);
CROSS(ds_svp, ds_slope_origin, ds_slope_u);
CROSS(ds_szp, ds_slope_v, ds_slope_u);
#undef CROSS
ds_sup->z *= focallengthf;
ds_svp->z *= focallengthf;
ds_szp->z *= focallengthf;
// Premultiply the texture vectors with the scale factors
sfmult *= (1 << nflatshiftup);
ds_sup->x *= sfmult;
ds_sup->y *= sfmult;
ds_sup->z *= sfmult;
ds_svp->x *= sfmult;
ds_svp->y *= sfmult;
ds_svp->z *= sfmult;
}
void R_SetTiltedSpan(INT32 span)
{
if (ds_su == NULL)
ds_su = Z_Malloc(sizeof(*ds_su) * vid.height, PU_STATIC, NULL);
if (ds_sv == NULL)
ds_sv = Z_Malloc(sizeof(*ds_sv) * vid.height, PU_STATIC, NULL);
if (ds_sz == NULL)
ds_sz = Z_Malloc(sizeof(*ds_sz) * vid.height, PU_STATIC, NULL);
ds_sup = &ds_su[span];
ds_svp = &ds_sv[span];
ds_szp = &ds_sz[span];
}
static void R_SetSlopePlaneVectors(visplane_t *pl, INT32 y, fixed_t xoff, fixed_t yoff)
{
R_SetTiltedSpan(y);
R_SetSlopePlane(pl->slope, pl->viewx, pl->viewy, pl->viewz, xoff, yoff, pl->viewangle, pl->plangle);
R_CalculateSlopeVectors();
}
static inline void R_AdjustSlopeCoordinates(vector3_t *origin)
{
const fixed_t modmask = ((1 << (32-nflatshiftup)) - 1);
fixed_t ox = (origin->x & modmask);
fixed_t oy = -(origin->y & modmask);
xoffs &= modmask;
yoffs &= modmask;
xoffs -= (origin->x - ox);
yoffs += (origin->y + oy);
}
void R_DrawSinglePlane(visplane_t *pl)
{
INT32 light = 0;
@@ -743,9 +915,7 @@ void R_DrawSinglePlane(visplane_t *pl)
return;
}
#ifndef NOWATER
itswater = false;
#endif
planeripple.active = false;
spanfunc = basespanfunc;
if (pl->polyobj && pl->polyobj->translucency != 0) {
@@ -832,15 +1002,13 @@ void R_DrawSinglePlane(visplane_t *pl)
}
else light = (pl->lightlevel >> LIGHTSEGSHIFT);
#ifndef NOWATER
if (pl->ffloor->flags & FF_RIPPLE
&& !pl->slope
)
if (pl->ffloor->flags & FF_RIPPLE)
{
INT32 top, bottom;
UINT8 *scr;
itswater = true;
planeripple.active = true;
if (spanfunc == R_DrawTranslucentSpan_8)
{
spanfunc = R_DrawTranslucentWaterSpan_8;
@@ -869,12 +1037,11 @@ void R_DrawSinglePlane(visplane_t *pl)
vid.width, vid.width);
}
}
#endif
}
else light = (pl->lightlevel >> LIGHTSEGSHIFT);
if (!pl->slope) // Don't mess with angle on slopes! We'll handle this ourselves later
if (viewangle != pl->viewangle+pl->plangle)
if (!pl->slope // Don't mess with angle on slopes! We'll handle this ourselves later
&& viewangle != pl->viewangle+pl->plangle)
{
memset(cachedheight, 0, sizeof (cachedheight));
angle = (pl->viewangle+pl->plangle-ANGLE_90)>>ANGLETOFINESHIFT;
@@ -939,7 +1106,6 @@ void R_DrawSinglePlane(visplane_t *pl)
xoffs = pl->xoffs;
yoffs = pl->yoffs;
planeheight = abs(pl->height - pl->viewz);
if (light >= LIGHTLEVELS)
light = LIGHTLEVELS-1;
@@ -947,137 +1113,32 @@ void R_DrawSinglePlane(visplane_t *pl)
if (light < 0)
light = 0;
if (pl->slope) {
// Potentially override other stuff for now cus we're mean. :< But draw a slope plane!
// I copied ZDoom's code and adapted it to SRB2... -fickle
floatv3_t p, m, n;
float ang;
float vx, vy, vz;
// compiler complains when P_GetZAt is used in FLOAT_TO_FIXED directly
// use this as a temp var to store P_GetZAt's return value each time
fixed_t temp;
// Okay, look, don't ask me why this works, but without this setup there's a disgusting-looking misalignment with the textures. -fickle
const float fudge = ((1<<nflatshiftup)+1.0f)/(1<<nflatshiftup);
angle_t hack = (pl->plangle & (ANGLE_90-1));
if (hack)
if (pl->slope)
{
if (!pl->plangle)
{
/*
Essentially: We can't & the components along the regular axes when the plane is rotated.
This is because the distance on each regular axis in order to loop is different.
We rotate them, & the components, add them together, & them again, and then rotate them back.
These three seperate & operations are done per axis in order to prevent overflows.
toast 10/04/17
---
...of coooourse, this still isn't perfect. but it looks... merely kind of grody, rather than
completely wrong? idk. i'm just backporting this to kart right now. if anyone else wants to
ever try dig around: it's drifting towards 0,0, and no, multiplying by fudge doesn't fix it.
toast 27/09/18
*/
R_AdjustSlopeCoordinates(&pl->slope->o);
}
if (planeripple.active)
{
planeheight = abs(P_GetZAt(pl->slope, pl->viewx, pl->viewy) - pl->viewz);
const fixed_t cosinecomponent = FINECOSINE(hack>>ANGLETOFINESHIFT);
const fixed_t sinecomponent = FINESINE(hack>>ANGLETOFINESHIFT);
R_PlaneBounds(pl);
const fixed_t modmask = ((1 << (32-nflatshiftup)) - 1);
fixed_t ox = (FixedMul(pl->slope->o.x,cosinecomponent) & modmask) - (FixedMul(pl->slope->o.y,sinecomponent) & modmask);
fixed_t oy = (-FixedMul(pl->slope->o.x,sinecomponent) & modmask) - (FixedMul(pl->slope->o.y,cosinecomponent) & modmask);
temp = ox & modmask;
oy &= modmask;
ox = FixedMul(temp,cosinecomponent)+FixedMul(oy,-sinecomponent); // negative sine for opposite direction
oy = -FixedMul(temp,-sinecomponent)+FixedMul(oy,cosinecomponent);
temp = xoffs;
xoffs = (FixedMul(temp,cosinecomponent) & modmask) + (FixedMul(yoffs,sinecomponent) & modmask);
yoffs = (-FixedMul(temp,sinecomponent) & modmask) + (FixedMul(yoffs,cosinecomponent) & modmask);
temp = xoffs & modmask;
yoffs &= modmask;
xoffs = FixedMul(temp,cosinecomponent)+FixedMul(yoffs,-sinecomponent); // ditto
yoffs = -FixedMul(temp,-sinecomponent)+FixedMul(yoffs,cosinecomponent);
xoffs -= (pl->slope->o.x - ox);
yoffs += (pl->slope->o.y + oy);
for (x = pl->high; x < pl->low; x++)
{
ds_bgofs = R_CalculateRippleOffset(x);
R_CalculatePlaneRipple(pl->viewangle + pl->plangle);
R_SetSlopePlaneVectors(pl, x, (xoffs + planeripple.xfrac), (yoffs + planeripple.yfrac));
}
}
else
{
xoffs &= ((1 << (32-nflatshiftup))-1);
yoffs &= ((1 << (32-nflatshiftup))-1);
xoffs -= (pl->slope->o.x + (1 << (31-nflatshiftup))) & ~((1 << (32-nflatshiftup))-1);
yoffs += (pl->slope->o.y + (1 << (31-nflatshiftup))) & ~((1 << (32-nflatshiftup))-1);
}
R_SetSlopePlaneVectors(pl, 0, xoffs, yoffs);
xoffs = (fixed_t)(xoffs*fudge);
yoffs = (fixed_t)(yoffs/fudge);
vx = FIXED_TO_FLOAT(pl->viewx+xoffs);
vy = FIXED_TO_FLOAT(pl->viewy-yoffs);
vz = FIXED_TO_FLOAT(pl->viewz);
temp = P_GetZAt(pl->slope, pl->viewx, pl->viewy);
zeroheight = FIXED_TO_FLOAT(temp);
#define ANG2RAD(angle) ((float)((angle)*M_PIl)/ANGLE_180)
// p is the texture origin in view space
// Don't add in the offsets at this stage, because doing so can result in
// errors if the flat is rotated.
ang = ANG2RAD(ANGLE_270 - pl->viewangle);
p.x = vx * cos(ang) - vy * sin(ang);
p.z = vx * sin(ang) + vy * cos(ang);
temp = P_GetZAt(pl->slope, -xoffs, yoffs);
p.y = FIXED_TO_FLOAT(temp) - vz;
// m is the v direction vector in view space
ang = ANG2RAD(ANGLE_180 - (pl->viewangle + pl->plangle));
m.x = cos(ang);
m.z = sin(ang);
// n is the u direction vector in view space
n.x = sin(ang);
n.z = -cos(ang);
ang = ANG2RAD(pl->plangle);
temp = P_GetZAt(pl->slope, pl->viewx + FLOAT_TO_FIXED(sin(ang)), pl->viewy + FLOAT_TO_FIXED(cos(ang)));
m.y = FIXED_TO_FLOAT(temp) - zeroheight;
temp = P_GetZAt(pl->slope, pl->viewx + FLOAT_TO_FIXED(cos(ang)), pl->viewy - FLOAT_TO_FIXED(sin(ang)));
n.y = FIXED_TO_FLOAT(temp) - zeroheight;
m.x /= fudge;
m.y /= fudge;
m.z /= fudge;
n.x *= fudge;
n.y *= fudge;
n.z *= fudge;
// Eh. I tried making this stuff fixed-point and it exploded on me. Here's a macro for the only floating-point vector function I recall using.
#define CROSS(d, v1, v2) \
d.x = (v1.y * v2.z) - (v1.z * v2.y);\
d.y = (v1.z * v2.x) - (v1.x * v2.z);\
d.z = (v1.x * v2.y) - (v1.y * v2.x)
CROSS(ds_su, p, m);
CROSS(ds_sv, p, n);
CROSS(ds_sz, m, n);
#undef CROSS
ds_su.z *= focallengthf;
ds_sv.z *= focallengthf;
ds_sz.z *= focallengthf;
// Premultiply the texture vectors with the scale factors
#define SFMULT 65536.f*(1<<nflatshiftup)
ds_su.x *= SFMULT;
ds_su.y *= SFMULT;
ds_su.z *= SFMULT;
ds_sv.x *= SFMULT;
ds_sv.y *= SFMULT;
ds_sv.z *= SFMULT;
#undef SFMULT
if (spanfunc == R_DrawTranslucentSpan_8)
if (spanfunc == R_DrawTranslucentWaterSpan_8)
spanfunc = R_DrawTiltedTranslucentWaterSpan_8;
else if (spanfunc == R_DrawTranslucentSpan_8)
spanfunc = R_DrawTiltedTranslucentSpan_8;
else if (spanfunc == splatfunc)
spanfunc = R_DrawTiltedSplat_8;
@@ -1085,9 +1146,12 @@ void R_DrawSinglePlane(visplane_t *pl)
spanfunc = R_DrawTiltedSpan_8;
planezlight = scalelight[light];
} else
planezlight = zlight[light];
}
else
{
planeheight = abs(pl->height - pl->viewz);
planezlight = zlight[light];
}
// set the maximum value for unsigned
pl->top[pl->maxx+1] = 0xffff;
@@ -1097,18 +1161,15 @@ void R_DrawSinglePlane(visplane_t *pl)
stop = pl->maxx + 1;
if (viewx != pl->viewx || viewy != pl->viewy)
if (pl->slope)
{
viewx = pl->viewx;
viewy = pl->viewy;
for (x = pl->minx; x <= stop; x++)
R_MakeTiltedSpans(x, pl->top[x-1], pl->bottom[x-1], pl->top[x], pl->bottom[x]);
}
if (viewz != pl->viewz)
viewz = pl->viewz;
for (x = pl->minx; x <= stop; x++)
else
{
R_MakeSpans(x, pl->top[x-1], pl->bottom[x-1],
pl->top[x], pl->bottom[x]);
for (x = pl->minx; x <= stop; x++)
R_MakeSpans(x, pl->top[x-1], pl->bottom[x-1], pl->top[x], pl->bottom[x]);
}
/*
+8 -2
View File
@@ -79,8 +79,6 @@ void R_PortalStoreClipValues(INT32 start, INT32 end, INT16 *ceil, INT16 *floor,
void R_PortalRestoreClipValues(INT32 start, INT32 end, INT16 *ceil, INT16 *floor, fixed_t *scale);
void R_ClearPlanes(void);
void R_MapPlane(INT32 y, INT32 x1, INT32 x2);
void R_MakeSpans(INT32 x, INT32 t1, INT32 b1, INT32 t2, INT32 b2);
void R_DrawPlanes(void);
visplane_t *R_FindPlane(fixed_t height, INT32 picnum, INT32 lightlevel, fixed_t xoff, fixed_t yoff, angle_t plangle,
extracolormap_t *planecolormap, ffloor_t *ffloor
@@ -94,6 +92,14 @@ void R_PlaneBounds(visplane_t *plane);
// Draws a single visplane.
void R_DrawSinglePlane(visplane_t *pl);
// Calculates the slope vectors needed for tilted span drawing.
void R_SetSlopePlane(pslope_t *slope, fixed_t xpos, fixed_t ypos, fixed_t zpos, fixed_t xoff, fixed_t yoff, angle_t angle, angle_t plangle);
void R_SetScaledSlopePlane(pslope_t *slope, fixed_t xpos, fixed_t ypos, fixed_t zpos, fixed_t xs, fixed_t ys, fixed_t xoff, fixed_t yoff, angle_t angle, angle_t plangle);
void R_CalculateSlopeVectors(void);
// Sets the slope vector pointers for the current tilted span.
void R_SetTiltedSpan(INT32 span);
typedef struct planemgr_s
{
visplane_t *plane;