kill polyobjects ifdef

This commit is contained in:
Alug committed 2024-02-28 17:58:39 +01:00
1 parent 5d2b213f76
commit 0a62fd11a0
8 files changed
+3 -175

No files matched your search

-3
View File
@@ -578,9 +578,6 @@ extern const char *compdate, *comptime, *comprevision, *compbranch;
/// Dumps the contents of a network save game upon consistency failure for debugging.
//#define DUMPCONSISTENCY
/// Polyobject fake flat code
#define POLYOBJECTS_PLANES
/// See name of player in your crosshair
#define SEENAMES
-2
View File
@@ -809,12 +809,10 @@ static void AdjustSegs(void)
float distv1,distv2,tmp;
nearv1 = nearv2 = MYMAX;
#ifdef POLYOBJECTS
// Don't touch polyobject segs. We'll compensate
// for this when we go about drawing them.
if (lseg->polyseg)
continue;
#endif
if (p) {
for (j = 0; j < p->numpts; j++)
+1 -18
View File
@@ -1756,7 +1756,6 @@ void HWR_ProcessSeg(void) // Sort of like GLWall::Process in GZDoom
// heights of the polygon, and h & l, are the final (clipped)
// poly coords.
#ifdef POLYOBJECTS
// NOTE: With polyobjects, whenever you need to check the properties of the polyobject sector it belongs to,
// you must use the linedef's backsector to be correct
// From CB
@@ -1766,7 +1765,6 @@ void HWR_ProcessSeg(void) // Sort of like GLWall::Process in GZDoom
popenbottom = popenbottomslope = back->floorheight;
}
else
#endif
{
popentop = min(worldtop, worldhigh);
popenbottom = max(worldbottom, worldlow);
@@ -1809,7 +1807,6 @@ void HWR_ProcessSeg(void) // Sort of like GLWall::Process in GZDoom
}
// CB
#ifdef POLYOBJECTS
// NOTE: With polyobjects, whenever you need to check the properties of the polyobject sector it belongs to,
// you must use the linedef's backsector to be correct
if (gr_curline->polyseg)
@@ -1819,7 +1816,6 @@ void HWR_ProcessSeg(void) // Sort of like GLWall::Process in GZDoom
lowcutslope = polybottomslope;
highcutslope = polytopslope;
}
#endif
else
{
// The cut-off values of a linedef can always be constant, since every line has an absoulute front and or back sector
@@ -1986,7 +1982,6 @@ void HWR_ProcessSeg(void) // Sort of like GLWall::Process in GZDoom
break;
}
#ifdef POLYOBJECTS
if (gr_curline->polyseg && gr_curline->polyseg->translucency > 0)
{
if (gr_curline->polyseg->translucency >= NUMTRANSMAPS) // wall not drawn
@@ -1997,7 +1992,6 @@ void HWR_ProcessSeg(void) // Sort of like GLWall::Process in GZDoom
else
blendmode = HWR_TranstableToAlpha(gr_curline->polyseg->translucency, &Surf);
}
#endif
// Render midtextures on two-sided lines with a z-buffer offset.
// This will cause the midtexture appear on top, if a FOF overlaps with it.
@@ -2625,10 +2619,9 @@ void HWR_AddLine(seg_t *line)
fixed_t v1x, v1y, v2x, v2y; // the seg's vertexes as fixed_t
boolean dont_draw = false;
#ifdef POLYOBJECTS
if (line->polyseg && !(line->polyseg->flags & POF_RENDERSIDES))
return;
#endif
gr_curline = line;
@@ -2872,7 +2865,6 @@ boolean HWR_CheckBBox(fixed_t *bspcoord)
return gld_clipper_SafeCheckRange(angle2, angle1);
}
#ifdef POLYOBJECTS
//
// HWR_AddPolyObjectSegs
@@ -2911,7 +2903,6 @@ void HWR_AddPolyObjectSegs(void)
}
}
#ifdef POLYOBJECTS_PLANES
void HWR_RenderPolyObjectPlane(polyobj_t *polysector, boolean isceiling, fixed_t fixedheight, FBITFIELD blendmode, UINT8 lightlevel, lumpnum_t lumpnum, sector_t *FOFsector, UINT8 alpha, extracolormap_t *planecolormap)
{
float height; //constant y for all points on the convex flat polygon
@@ -3144,8 +3135,6 @@ void HWR_AddPolyObjectPlanes(void)
}
}
}
#endif
#endif
//
@@ -3440,7 +3429,6 @@ void HWR_Subsector(size_t num)
}
}
#ifdef POLYOBJECTS
// Draw all the polyobjects in this subsector
if (sub->polyList)
{
@@ -3464,15 +3452,12 @@ void HWR_Subsector(size_t num)
// Draw polyobject lines.
HWR_AddPolyObjectSegs();
#ifdef POLYOBJECTS_PLANES
if (sub->validcount != validcount) // This validcount situation seems to let us know that the floors have already been drawn.
{
// Draw polyobject planes
HWR_AddPolyObjectPlanes();
}
#endif
}
#endif
skip_stuff_for_portals:
@@ -3497,9 +3482,7 @@ skip_stuff_for_portals:
while (count--)
{
#ifdef POLYOBJECTS
if (!line->polyseg) // ignore segs that belong to polyobjects
#endif
HWR_AddLine(line);
line++;
}
-6
View File
@@ -121,13 +121,9 @@ void HWR_DrawScreenFinalTexture(INT32 width, INT32 height);
void HWR_RenderPlane(subsector_t *subsector, extrasubsector_t *xsub, boolean isceiling, fixed_t fixedheight, FBITFIELD PolyFlags, INT32 lightlevel, lumpnum_t lumpnum, sector_t *FOFsector, UINT8 alpha, extracolormap_t *planecolormap);
void HWR_AddTransparentFloor(lumpnum_t lumpnum, extrasubsector_t *xsub, boolean isceiling, fixed_t fixedheight, INT32 lightlevel, INT32 alpha, sector_t *FOFSector, FBITFIELD blend, boolean fogplane, extracolormap_t *planecolormap);
#ifdef POLYOBJECTS
#ifdef POLYOBJECTS_PLANES
void HWR_RenderPolyObjectPlane(polyobj_t *polysector, boolean isceiling, fixed_t fixedheight, FBITFIELD blendmode, UINT8 lightlevel, lumpnum_t lumpnum, sector_t *FOFsector, UINT8 alpha, extracolormap_t *planecolormap);
void HWR_AddPolyObjectPlanes(void);
void HWR_AddTransparentPolyobjectFloor(lumpnum_t lumpnum, polyobj_t *polysector, boolean isceiling, fixed_t fixedheight, INT32 lightlevel, INT32 alpha, sector_t *FOFSector, FBITFIELD blend, extracolormap_t *planecolormap);
#endif
#endif
// hw_main.c: Segs
void HWR_ProcessSeg(void); // Sort of like GLWall::Process in GZDoom
@@ -138,9 +134,7 @@ void HWR_AddTransparentWall(FOutVector *wallVerts, FSurfaceInfo * pSurf, INT32 t
void HWR_DrawSkyWall(FOutVector *wallVerts, FSurfaceInfo *Surf);
void HWR_DrawSkyBackground(float fpov);
#ifdef POLYOBJECTS
void HWR_AddPolyObjectSegs(void);
#endif
// hw_main.c: BSP
void HWR_RenderBSPNode(INT32 bspnum);
-16
View File
@@ -546,22 +546,6 @@ void P_LineOpening(line_t *linedef, mobj_t *mobj)
texheight = textures[texnum]->height << FRACBITS;
// Set texbottom and textop to the Z coordinates of the texture's boundaries
#if 0 // #ifdef POLYOBJECTS
// don't remove this code unless solid midtextures
// on non-solid polyobjects should NEVER happen in the future
if (linedef->polyobj && (linedef->polyobj->flags & POF_TESTHEIGHT)) {
if (linedef->flags & ML_EFFECT5 && !side->repeatcnt) { // "infinite" repeat
texbottom = back->floorheight + side->rowoffset;
textop = back->ceilingheight + side->rowoffset;
} else if (!!(linedef->flags & ML_DONTPEGBOTTOM) ^ !!(linedef->flags & ML_EFFECT3)) {
texbottom = back->floorheight + side->rowoffset;
textop = texbottom + texheight*(side->repeatcnt+1);
} else {
textop = back->ceilingheight + side->rowoffset;
texbottom = textop - texheight*(side->repeatcnt+1);
}
} else
#endif
{
if (linedef->flags & ML_EFFECT5 && !side->repeatcnt) { // "infinite" repeat
texbottom = openbottom + side->rowoffset;
-1
View File
@@ -25,7 +25,6 @@
#include "screen.h" // MAXVIDWIDTH, MAXVIDHEIGHT
#define POLYOBJECTS
//
// ClipWallSegment
+2 -56
View File
@@ -622,62 +622,8 @@ void R_RenderMaskedSegRange(drawseg_t *ds, INT32 x1, INT32 x2)
// draw the texture
col = (column_t *)((UINT8 *)R_GetColumn(texnum, maskedtexturecol[dc_x]) - 3);
//#ifdef POLYOBJECTS_PLANES
#if 0 // Disabling this allows inside edges to render below the planes, for until the clipping is fixed to work right when POs are near the camera. -Red
if (curline->dontrenderme && curline->polyseg && (curline->polyseg->flags & POF_RENDERPLANES))
{
fixed_t my_topscreen;
fixed_t my_bottomscreen;
fixed_t my_yl, my_yh;
my_topscreen = sprtopscreen + spryscale*col->topdelta;
my_bottomscreen = sprbotscreen == INT32_MAX ? my_topscreen + spryscale*col->length
: sprbotscreen + spryscale*col->length;
my_yl = (my_topscreen+FRACUNIT-1)>>FRACBITS;
my_yh = (my_bottomscreen-1)>>FRACBITS;
// CONS_Debug(DBG_RENDER, "my_topscreen: %d\nmy_bottomscreen: %d\nmy_yl: %d\nmy_yh: %d\n", my_topscreen, my_bottomscreen, my_yl, my_yh);
if (numffloors)
{
INT32 top = my_yl;
INT32 bottom = my_yh;
for (i = 0; i < numffloors; i++)
{
if (!ffloor[i].polyobj || ffloor[i].polyobj != curline->polyseg)
continue;
if (ffloor[i].height < viewz)
{
INT32 top_w = ffloor[i].plane->top[dc_x];
// CONS_Debug(DBG_RENDER, "Leveltime : %d\n", leveltime);
// CONS_Debug(DBG_RENDER, "Top is %d, top_w is %d\n", top, top_w);
if (top_w < top)
{
ffloor[i].plane->top[dc_x] = (INT16)top;
ffloor[i].plane->picnum = 0;
}
// CONS_Debug(DBG_RENDER, "top_w is now %d\n", ffloor[i].plane->top[dc_x]);
}
else if (ffloor[i].height > viewz)
{
INT32 bottom_w = ffloor[i].plane->bottom[dc_x];
if (bottom_w > bottom)
{
ffloor[i].plane->bottom[dc_x] = (INT16)bottom;
ffloor[i].plane->picnum = 0;
}
}
}
}
}
else
#endif
colfunc_2s(col);
colfunc_2s(col);
}
spryscale += rw_scalestep;
}
-73
View File
@@ -1225,65 +1225,6 @@ fixed_t R_GetShadowZ(mobj_t *thing, pslope_t **shadowslope)
groundslope = NULL;
}
#if 0 // Unfortunately, this drops CEZ2 down to sub-17 FPS on my i7.
// NOTE: this section was not updated to reflect reverse gravity support
// Check polyobjects and see if groundz needs to be altered, for rings only because they don't update floorz
if (thing->type == MT_RING)
{
INT32 xl, xh, yl, yh, bx, by;
xl = (unsigned)(thing->x - thing->radius - bmaporgx)>>MAPBLOCKSHIFT;
xh = (unsigned)(thing->x + thing->radius - bmaporgx)>>MAPBLOCKSHIFT;
yl = (unsigned)(thing->y - thing->radius - bmaporgy)>>MAPBLOCKSHIFT;
yh = (unsigned)(thing->y + thing->radius - bmaporgy)>>MAPBLOCKSHIFT;
BMBOUNDFIX(xl, xh, yl, yh);
validcount++;
for (by = yl; by <= yh; by++)
for (bx = xl; bx <= xh; bx++)
{
INT32 offset;
polymaplink_t *plink; // haleyjd 02/22/06
if (bx < 0 || by < 0 || bx >= bmapwidth || by >= bmapheight)
continue;
offset = by*bmapwidth + bx;
// haleyjd 02/22/06: consider polyobject lines
plink = polyblocklinks[offset];
while (plink)
{
polyobj_t *po = plink->po;
if (po->validcount != validcount) // if polyobj hasn't been checked
{
po->validcount = validcount;
if (!P_MobjInsidePolyobj(po, thing) || !(po->flags & POF_RENDERPLANES))
{
plink = (polymaplink_t *)(plink->link.next);
continue;
}
// We're inside it! Yess...
z = po->lines[0]->backsector->ceilingheight;
if (z < thing->z+thing->height/2 && z > groundz)
{
groundz = z;
groundslope = NULL;
}
}
plink = (polymaplink_t *)(plink->link.next);
}
}
}
#endif
if (shadowslope != NULL)
*shadowslope = groundslope;
@@ -2495,20 +2436,6 @@ static void R_CreateDrawNodes(void)
}
else if (r2->seg)
{
#if 0 //#ifdef POLYOBJECTS_PLANES
if (r2->seg->curline->polyseg && rover->mobj && P_MobjInsidePolyobj(r2->seg->curline->polyseg, rover->mobj)) {
// Determine if we need to sort in front of the polyobj, based on the planes. This fixes the issue where
// polyobject planes render above the object standing on them. (A bit hacky... but it works.) -Red
mobj_t *mo = rover->mobj;
sector_t *po = r2->seg->curline->backsector;
if (po->ceilingheight < viewz && mo->z+mo->height > po->ceilingheight)
continue;
if (po->floorheight > viewz && mo->z < po->floorheight)
continue;
}
#endif
if (rover->x1 > r2->seg->x2 || rover->x2 < r2->seg->x1)
continue;