It's been more than 2^31 seconds since 1904.
* include/freetype/tttables.h (TT_Header): Change field types.
* src/sfnt/ttload.c (tt_face_load_generic_header): Updated.
This is a follow-up to the previous commit.
* src/cff/cffobjs.c (cff_face_init), src/sfnt/sfobjs.c
(sfnt_load_face), src/type1/t1objs.c (T1_Face_Init),
src/type42/t42objs.c (T42_Face_Init): Implement it.
* include/freetype/ftsystem.h: Include FT_TYPES_H.
(*FT_Alloc_Func, *FT_Realloc_Func): Use size_t for the size arguments.
* src/raster/ftmisc.h: Ditto.
* builds/amiga/src/base/ftsystem.c, builds/unix/ftsystem.c,
* builds/vms/ftsystem.c, src/base/ftsystem.c (ft_alloc, ft_realloc):
Use size_t for the size arguments.
* src/base/ftdbgmem.c (ft_mem_debug_alloc, ft_mem_debug_realloc): Use
FT_Offset, aka size_t, for the size arguments.
Before this commit we had code like
(FT_Bool)( globals->glyph_styles[gindex] & 0x8000)
Since `FT_Bool' is defined to be an `unsigned char', the code
evaluated to something like
(unsigned char)( 0x8532 & 0x8000)
which in turn expanded to
(unsigned char)( 0x8000)
and finally yielded 0x00 – i.e., false – not as expected.
Problem reported and analyzed by Tony Smith <tony.smith@macro4.com>.
* include/freetype/fttypes.h (FT_BOOL): Add a comparison against
zero so that we always have a Boolean expression.
*/*: Replace castings to `FT_Bool' with calls to `FT_BOOL' where
possible.
This makes FT_Get_Char_Index and FT_Get_Next_Char 4-5 times faster.
* src/bdf/bdfdrivr.c (bdf_cmap_char_{index,next}): Help binary search
with continuous prediction.
For bitmap fonts, `FT_Load_Glyph' should either return an error or
not set the format to `FT_GLYPH_FORMAT_OUTLINE'. However, in this
case `FT_Load_Glyph' calls into the auto-hinter which calls back
into `FT_Load_Glyph' with `FT_LOAD_NO_SCALE' in the flags, which
marks the glyph as `FT_GLYPH_FORMAT_OUTLINE' with an empty path
(even though it doesn't have any path). It appears that the
auto-hinter should not be called when the face doesn't have
outlines. The current test for using the auto-hinter in
`FT_Load_Glyph' checks if the driver supports scalable outlines, but
not if the face supports scalable outlines.
* src/base/ftobjs.c (FT_Load_Glyph): Directly check whether we have
scalable outlines.
PCF comes with charmap lookup table, aka PCF encodings. Using it
directly makes FT_Get_Char_Index and FT_Get_Next_Char 4-5 times
faster than the original BDF-like binary searches.
* src/pcf/pcf.h (PCF_EncodingRec): Removed.
(PCF_FaceRec): Remove `nencodings' and `encodings'.
* src/pcf/pcfdrivr.c (pcf_cmap_char_{index,next}): Replaced.
* src/pcf/pcfread.c (pcf_get_encodings): Store data differently.
* src/pcf/pcf.h (PCF_Face): Updated to include...
(PCF_EncRec): ... this new structure to store charmap geometry.
* src/pcf/pcfread.c (pcf_get_encodings): Store charmap geometry.
Reported as
https://bugs.chromium.org/p/oss-fuzz/issues/detail?id=10317
* src/truetype/ttgxvar.c (ft_var_load_gvar): Properly exit memory
frame if we have invalid glyph variation data offsets.
(tt_face_vary_cvt): Protect against missing `tuplecoords' array.
Fix typo.
* src/sfnt/sfdriver (IS_WIN, IS_APPLE): Omit language ID checks.
(get_win_string, get_apple_string): Return NULL when the PostScript
font name characters is not according to specification.
(get_win_string): Make trace output work if the high byte if
non-zero.
(sfnt_get_var_ps_name, sfnt_get_ps_name): Previously we preferred
Win PS name (when there is also an Apple PS name); change this into
a fallback to Apple PS name in case the Win PS name is invalid.
These public API functions(!) were always undocumented and have
escaped all clean-up efforts until now.
* include/freetype/ftoutln.h (FT_Outline_New_Internal,
FT_Outline_Done_Internal): Removed.
* src/base/ftoutln.h (FT_Outline_New_Internal,
FT_Outline_Done_Internal): Merge into...
(FT_Outline_New, FT_Outline_Done): ... these functions.
* docs/README: Updated.
* include/freetype/internal/ftobjs.h (ft_glyphslot_preset_bitmap):
Change return type.
* src/base/ftobjs.c (ft_glyphslot_preset_bitmap): Return the bitmap
size assessment.
* src/raster/ftrend1.c (ft_raster1_render): Use it to refuse the
rendering of enourmous or far-fetched outlines.
* src/smooth/ftsmooth.c (ft_smooth_render_generic): Ditto.
* src/autofit/afhints.h (AF_PointRec) [FT_DEBUG_AUTOFIT]: New arrays
`before' and `after'.
* src/autofit/afhints.c (af_get_strong_edge_index): New auxiliary
function.
(af_glyph_hints_dump_points): Trace `before' and `after' edges.
(af_glyph_hints_align_strong_points) [FT_DEBUG_AUTOFIT]: Set
`before' and `after' information.
Reported as
https://bugs.chromium.org/p/oss-fuzz/issues/detail?id=10080
* src/psaux/cffdecode.c (cff_decoder_parse_charstrings) <cff_op_roll>
[CFF_CONFIG_OPTION_OLD_ENGINE]: Use modulo for loop count, as
documented in the specification.
Triggered by
https://bugs.chromium.org/p/oss-fuzz/issues/detail?id=10054
* src/truetype/ttgload.c (load_truetype_glyph): Don't use variable
`opened_frame' to trace whether a frame must be closed at the end of
function: This fails because `TT_Vary_Apply_Glyph_Deltas' (which
gets called for space glyphs) uses a frame by itself. Instead,
close the frame after loading the header, then use another frame for
the remaining part of the glyph later on.
Also avoid calling `tt_get_metrics' twice under some circumstances.
* include/freetype/internal/ftcalc.h (ADD_INT64, SUB_INT64,
MUL_INT64, DIV_INT64) [FT_LONG64]: New macros.
* src/base/ftcalc.c (ft_corner_orientation) [FT_LONG64]: Use
`SUB_INT64' and `MUL_INT64'.
Reported as
https://bugs.chromium.org/p/oss-fuzz/issues/detail?id=10028
* src/truetype/ttgload.c (ON_CURVE_POINT, X_SHORT_VECTOR,
Y_SHORT_VECTOR, REPEAT_FLAG, X_POSITIVE, SAME_X, Y_POSITIVE, SAME_Y,
OVERLAP_SIMPLE): New macros.
(TT_Load_Simple_Glyph): Use new macros to make code more readable.
Remove useless adjustment of `outline->tags' elements.
There is no harm except some umbiguity in broken fonts with duplicate
encodings.
* src/bdf/bdflib.c (_bdf_parse_glyphs): Remove duplicate tracking.
(_bdf_parse_t): Remove large `have' bitfield.
* src/bdf/bdf.h (bdf_font_t): Remove `nmod', `umod', and `modified',
which were set but never used.
* src/bdf/bdflib.c (_bdf_parse_{glyphs,properties}, bdf_load_font):
Updated accordingly.
Reported as
https://bugs.chromium.org/p/oss-fuzz/issues/detail?id=9864
* src/psaux/cffdecode.c (cff_decoder_parse_charstrings)
<cff_op_random> [CFF_CONFIG_OPTION_OLD_ENGINE]: Use top dict's
`random' field directly if parsing dictionaries.
It sometimes makes sense to suppress tracing informations, for
example, if it outputs identical messages again and again.
* include/freetype/internal/ftdebug.h: Make `ft_trace_levels' a
pointer.
(FT_Trace_Disable, FT_Trace_Enable): New declarations.
* src/base/ftdebug.c (ft_trace_levels): Rename to...
(ft_trace_levels_enabled): ... this.
(ft_trace_levels_disabled): New array.
(ft_trace_levels): New pointer.
(FT_Trace_Disable, FT_Trace_Enable): Implement.
(ft_debug_init): Updated.
* src/base/ftobjs.c (pixel_modes): Move this array to top level
from ...
(FT_Load_Glyph): ... here.
(FT_Render_Glyph_Internal): Use `width' x `height' in trace message.
Use `pixel_modes'.
Treat all size related properties as unsigned values.
* src/pcf/pcf.h (PCF_ParsePropertyRec): Use unsigned `name' and
`value'.
* src/pcf/pcfread.c (pcf_get_propeerties, pcf_load_font): Updated
parsing code and handling of AVERAGE_WIDTH, POINT_SIZE, PIXEL_SIZE,
RESOLUTION_X and RESOLUTION_Y.
Unofficial specifications hesitate to use unsigned 32-bit integers.
Negative values caused a lot of trouble in the past and it is safer
and easier to treat some properties as unsigned.
* src/pcf/pcf.h (PCF_AccelRec): Use unsigned values for `fontAscent',
`fontDescent', and `maxOverlap'.
* src/pcf/pcfread.c (pcf_load_font, pcf_get_accel): Updated.
* src/pcf/pcfdrivr.c (PCF_Glyph_Load, PCF_Size_Select,
PCF_Size_Request): Updated.
* src/cid/cidload.c: Include FT_INTERNAL_POSTSCRIPT_AUX_H
(cid_load_keyword, cid_parse_font_matrix, parse_fd_array,
parse_expansion_factor, cid_parse_dict): Add tracing calls.
(parse_font_name): New function to trace `/FontName' keywords in
/FDArray dict.
(cid_field_records): Register `parse_font_name'.
* src/truetype/ttgxvar.c (tt_set_mm_blend): Correctly set
`face->doblend' if the current call to the function yields the same
blend coordinates as the previous call.
* src/base/ftutil.c (ft_mem_alloc, ft_mem_realloc): Only call
`FT_MEM_ZERO' if we actually have a buffer.
(ft_mem_dup): Only call `ft_memcpy' if we actually have a buffer.
We no longer use predefined _DLL, which can be defined for static
builds too with /MD. We use DLL_EXPORT and DLL_IMPORT instead,
following libtool convention.
* CMakeLists.txt [WIN32], builds/windows/vc2010/freetype.vcxproj:
Define DLL_EXPORT manually.
* include/freetype/config/ftconfig.h, builds/unix/ftconfig.in,
builds/vms/ftconfig.h, builds/windows/vc2010/index.html,
src/base/ftver.rc: /_DLL/d, s/FT2_DLLIMPORT/DLL_IMPORT/.
For Multiple Masters fonts We don't support intermediate designs;
this implies that
number_of_designs == 2 ^^ number_of_axes
Reported as
https://bugs.chromium.org/p/oss-fuzz/issues/detail?id=9557
* src/type1/t1load.c (T1_Open_Face): Ensure above constraint.
(T1_Get_MM_Var): Remove now redundant test.
This code is taken from the type1 module.
Reported as
https://bugs.chromium.org/p/oss-fuzz/issues/detail?id=9510
* src/cid/cidload.c (parse_fd_array): Set some private dict default
values.
(cid_face_open): Do the sanitizing.
Fix some tracing messages.
This change makes the driver use the `defaultChar' property of PCF
files.
* src/pcf/pcf.h (PCF_FaceRec): Change type of `defaultChar' to
unsigned.
* src/pcf/pcfread.c (pcf_get_encodings): Read `defaultChar' as
unsigned.
Validate `defaultChar'.
If `defaultChar' doesn't point to glyph index zero, swap glyphs with
index zero and index `defaultChar' and adjust the encodings
accordingly.
* src/pcf/pcfdrivr.c (pcf_cmap_char_index, pcf_cmap_char_next,
PCF_Glyph_Load): Undo change from 2002-06-16 which always enforced
the first character in the font to be the default character.
This is a valid encoding tag for BDF, PCF, and Windows FNT, and
there is no reason to disallow it for these formats.
* src/base/ftobjs.c (FT_Select_Charmap): Implement it.
Taken from patch #9667, written by Steve Langasek
<vorlon@debian.org>.
This fixes a build failure (most probably a bug in gcc) on ppc64el
when building with -O3.
It turned out that we incorrectly round CVT and glyph point deltas
before accumulation, leading to severe positioning errors if there
are many delta values to sum up.
Problem reported by Akiem Helmling <akiem@underware.nl> and analyzed
by Behdad.
* src/truetype/ttgxvar.c (ft_var_readpackeddelta): Return deltas in
16.16 format.
(tt_face_var_cvt): Collect deltas in `cvt_deltas', which is a 16.16
format array, and add the accumulated values to the CVT at the end
of the function.
(TT_Vary_Apply_Glyph_Deltas): Store data in `points_org' and
`points_out' in 16.16 format.
Collect deltas in `point_deltas_x' and `point_deltas_y', which are
16.16 format arrays, and add the accumulated values to the glyph
coordinates at the end of the function.
* src/base/ftcalc.c (FT_Matrix_Check): New base function to properly
reject degenerate font matrices.
* include/freetype/internal/ftcalc.h: Updated.
* src/cff/cffparse.c (cff_parse_font_matrix), src/cid/cidload.c
(cid_parse_font_matrix), src/type1/t1load.c (t1_parse_font_matrix),
src/type42/t42parse.c (t42_parse_font_matrix): Use
`FT_Matrix_Check'.
Reported by Alexei.
* src/sfnt/ttcolr.c (tt_face_get_colr_layer): Return immediately if
`colr' is NULL.
* src/sfnt/ttcpal.c (tt_face_palette_set): Return immediately, if
`cpal' is NULL.
This function facilitates access to full capabilities of FreeType
rendering engine for custom glyphs. This can be quite useful for
consistent rendering of mathematical and chemical formulas, e.g.
https://bugs.chromium.org/p/chromium/issues/detail?id=757078
* include/freetype/ftglyph.h, src/base/ftglyph.c (FT_New_Glyph): New
function.
bdflib.c:1562 could be reached with `font->glyphs_used == 0'. That
caused an underflow of the unsigned value which results in undefined
behaviour.
* src/bdf/bdflib.c (src/bdf/bdflib.c): Bail out earlier than before
if the `ENCODING' keyword cannot be found.
Still missing: Support for negative bitmap pitch and subpixel offset
of source bitmap.
* include/freetype/ftbitmap.h, src/base/ftbitmap.c
(FT_Bitmap_Blend): New function.
This solution doesn't store any data in an `FT_GlyphSlot' object.
* include/freetype/freetype.h (FT_LayerIterator): New structure.
(FT_Get_Color_Glyph_Layer): New function.
* include/freetype/internal/sfnt.h (TT_Get_Colr_Layer_Func): New
function type.
(SFNT_Interface, FT_DEFINE_SFNT_INTERFACE): Add it.
* src/base/ftobjs.c (FT_Get_Color_Glyph_Layer): Implement it.
* src/sfnt/ttcolr.c (tt_face_get_colr_layer): New function.
* src/sfnt/ttcolr.h: Updated.
* src/sfnt/sfdriver.c (sfnt_interface): Updated.
* src/sfnt/sfdriver.c: Include `ttcpal.h'.
* src/sfnt/sfnt.c: Include `ttcpal.c'.
* src/sfnt/ttcolr.c, src/sfnt/ttcolr.h: Move CPAL stuff to ...
* src/sfnt/ttcpal.c, src/sfnt/ttcpal.c: ... these new files.
* src/sfnt/Jamfile (_sources), src/sfnt/rules.mk (SFNT_DRV_SRC):
Updated.
* include/freetype/internal/fttrace.h: Add support for `colr' and
`cpal'.
Sort entries.
* src/sfnt/ttcolr.c (tt_face_find_color): Removed.
(tt_face_colr_blend_layer): Use `face->palette' instead of calling
`tt_face_find_color'.
Use and set text foreground color.
* src/sfnt/ttcolr.c (tt_face_palette_set): New function.
(tt_face_load_colr): Allocate `face->palette' and call
`tt_face_palette_set'.
Adjust return error code in case of error.
* src/sfnt/ttcolr.h: Updated.
* include/freetype/internal/sfnt.h (TT_Set_Palette_Func): New
function type.
(SFNT_Interface, FT_DEFINE_SFNT_INTERFACE): Add it.
* src/sfnt/sfdriver.c (sfnt_interface), src/sfnt/sfobjs.c
(sfnt_done_face): Updated.
* src/raster/ftraster.c (black_TWorker, SCALED, Set_High_Precision):
Clean up after 5-level gray removal (8dc8635874).
(Vertical_Sweep_Span): Be brief.
* include/freetype/internal.tttypes.h: Include FT_COLOR_H.
(TT_FaceRec): Add `palette' field.
* src/sfnt/ttcolr.c: Include FT_COLOR_H.
(Cpal): Remove all data covered by the new `palette' field in
`TT_FaceRec'.
(tt_face_load_colr): Updated.
Read `CPAL' version 1 data.
(tt_face_load_colr_layers, tt_face_find_color): Updated.
* src/sfnt/sfobjs.c (sfnt_done_face): Free glyph color palette data.
This introduces `FT_Library_SetLcdGeometry' for setting up arbitrary
LCD subpixel geometry including non-striped patterns.
* src/base/ftlcdfil.c (FT_Library_SetLcdGeometry): New function.
* include/freetype/ftlcdfil.h: Document it.
* include/freetype/freetype.h: Minor.
* include/freetype/ftchapters.h: Minor.
* src/raster/ftraster.c [STANDALONE] (FT_Outline_Get_CBox): Add
function.
[!STANDALONE]: Include FT_OUTLINE_H.
(ft_black_render): Compute CBox and reject glyphs larger than
0xFFFF x 0xFFFF.
* src/smooth/ftgrays.c (gray_raster_render): Reject glyphs larger
than 0xFFFF x 0xFFFF.
This monster commit was created by applying Nikhil's scripts
`docconverter.py' and `markify.py' to all C header and source files,
followed up by minor manual clean-up.
No change in functionality, of course.
I used commit f7419907bc6044b9b7057f9789866426c804ba82 from
https://github.com/nikramakrishnan/freetype-docs.git.
The robust rendering of estra large glyphs came with unbearable cost.
The old way of bisecting should fail but fail faster.
* src/smooth/ftgrays.c (gray_convert_glyph): Switch back to bisecting
in y-direction.
The declaration of `edge2' can be reached with `edge1 == NULL' and
`axis->edges == 0' which results in undefined behaviour.
* src/autofit/afloader.c (af_loader_load_glyph): Initialise `edge2'
after checking `axis->num_edges > 1'. `edge1 != NULL' can be assumed.
* include/freetype/config/ftheader.h (FT_COLOR_H): New macro.
* include/freetype/internal/ftobjs.h (FT_Colr_Internal): Change
type of `load_flags' to `FT_Int32'.
* include/freetype/internal/sfnt.h (TT_Load_Colr_Layer_Func): Change
type of `idx' to `FT_UInt'.
(TT_Blend_Colr_Func): Change type of `color_index' to `FT_UInt'.
* src/base/ftobjs.c (FT_Render_Glyph_Internal): Change type of
`load_flags' to `FT_Int32'.
* src/sfnt/ttcolr.c (find_base_glyph_record,
tt_face_load_colr_layers): Change type of `glyph_id' to `FT_UInt'.
(tt_face_find_color, tt_face_colr_blend_layer): Change type of
`color_index' to `FT_UInt'.
Fix signedness and type issues.
* src/sfnt/ttcolr.h: Updated.
This platform uses backslashes for paths, which docmaker didn't
understand correctly.
* src/tools/docmaker/tohtml.py (HtmlFormatter::blockEnter): Use
`os.path.normpath' to normalize the path for the platform being
used.
This generalizes magic outline shifts that make Harmony LCD
rendering work in terms of precise two-dimensional RGB subpixel
positions. These coordinates are now set in time of the `smooth'
module initialization and later used to shift a glyph outline for
rendering. FT_RENDER_MODE_LCD and FT_RENDER_MODE_LCD_V use the same
coordinates. The letter, however, rotates them before using.
The LCD bitmap padding is also calculated using these coordinates.
* include/freetype/internal/ftobjs.h (FT_LibraryRec): New array field
`lcd_geometry'.
* src/base/ftlcdfil.c (ft_lcd_padding): Reworked.
* src/base/ftobjs.c (ft_glyphslot_preset_bitmap): Updated accordingly.
* src/smooth/ftsmooth.c [!FT_CONFIG_OPTION_SUBPIXEL_RENDERING]
(ft_smooth_init): Initialize `lcd_geometry'.
(ft_smooth_render_generic): Formalize outline shifts.
* include/freetype/internal/ftobjs.h (FT_Glyph_LayerRec): Move this
structure to...
* include/freetype/freetype.h (FT_Glyph_LayerRec): ... this
header file.
(FT_Glyph_Layer): New typedef.
Update code to use it where appropriate.
* src/base/ftobjs.c (FT_Get_GlyphLayers): New function.
It is rather fundamental to set monochrome bitmap based on rounded
CBox because the b/w rasterizer turns on pixels when their centers are
inside the glyph outline. The dropout control is unpredictable and can
distort narrow glyphs if the bitmap is too wide.
Reported by Chris Liddell.
* src/base/ftobjs.c (ft_glyphslot_preset_bitmap): If BBox boundaries
are too close, adjust them before rounding.
* src/truetype/ttgload.c (TT_Load_Glyph): Free old `layers' array
before reassigning allocated memory.
Only allocate `color_layers' if we don't have one already.
* src/sfnt/ttcolr.c (tt_face_load_colr_layers): Return FT_Err_Ok if
current glyph is not a `COLR' base glyph.
* src/truetype/ttgload.c (TT_Load_Glyph): Don't allocate
`color_layers' if there are no color layers.
This commit enables OpenType's COLR/CPAL table handling; a typical
application are color emojis that can be scaled to any size.
If the color palette does not exist or is invalid, the rendering
step rasterizes the outline instead. The current implementation
assumes that the foreground is black.
Enable this by defining option TT_CONFIG_OPTION_COLOR_LAYERS.
There are still some issues with metrics; additionally, an API to
fetch color layers is missing.
* devel/ftoption.h, include/freetype/config/ftoption.h
(TT_CONFIG_OPTION_COLOR_LAYERS): New macro.
* include/freetype/internal/ftobjs.h (FT_Glyph_LayerRec,
FT_Colr_InternalRec): New structures.
(FT_Slot_InternalRec): Add `color_layers' field.
* include/freetype/internal/sfnt.h (TT_Load_Colr_Layer_Func,
TT_Blend_Colr_Func): New function types.
(SFNT_Interface): Add `load_colr', `free_colr', `load_colr_layer',
and `colr_blend' fields.
* include/freetype/internal/tttypes.h (TT_FaceRec): Add
`colr_and_cpal' field.
* include/freetype/internal/tttags. (TTAG_COLR, TTAG_CPAL): New
macros.
* src/sfnt/ttcolr.c, src/sfnt/ttcolr.h: New files.
* src/base/ftobjs.c (ft_glyphslot_done, FT_Render_Glyph_Internal):
Handle glyph color layers.
* src/sfnt/Jamfile (_sources), src/sfnt/rules.mk (SFNT_DRV_SRC): Add
`ttcolr.c'.
* src/sfnt/sfdriver.c: Include `ttcolr.h'.
(PUT_COLOR_LAYERS): New macro.
Update call to `FT_DEFINE_SFNT_INTERFACE'.
* src/sfnt/sfnt.c: Include `ttcolr.c'.
* src/sfnt/sfobjs.c (sfnt_load_face): Load `COLR' and `CPAL' tables.
(sfnt_done_face): Updated.
* src/truetype/ttgload.c (TT_Load_Glyph): Handle color layers.
Problem reported by Shailesh Mistry <shailesh.mistry@hotmail.co.uk>.
* src/autofit/afshaper.c (af_shaper_buf_create,
af_shaper_buf_destroy) [!FT_CONFIG_OPTION_USE_HARFBUZZ]: Don't
allocate and free a four-byte buffer. Instead, make those functions
no-ops; the calling functions will provide a pointer to a buffer
instead.
* src/autofit/afcjk.c (af_cjk_metrics_init_widths,
af_cjk_metrics_init_blues, af_cjk_metrics_check_digits),
src/autofit/aflatin.c (af_latin_metrics_init_widths,
af_latin_metrics_init_blues, af_latin_metrics_check_digits)
[!FT_CONFIG_OPTION_USE_HARFBUZZ]: Use pointer to local variable for
`shaper_buf'.
*/* [FT_CONFIG_OPTION_PIC]: Remove all code guarded by this
preprocessor symbol.
*/*: Replace `XXX_GET' macros (which could be either a function in
PIC mode or an array in non-PIC mode) with `xxx' arrays.
* include/freetype/internal/ftpic.h, src/autofit/afpic.c,
src/autofit/afpic.h, src/base/basepic.c, src/base/basepic.h,
src/base/ftpic.c, src/cff/cffpic.c, src/cff/cffpic.h,
src/pshinter/pshpic.c, src/pshinter/pshpic.h, src/psnames/pspic.c,
src/psnames/pspic.h, src/raster/rastpic.c, src/raster/rastpic.h,
src/sfnt/sfntpic.c, src/sfnt/sfntpic.h, src/smooth/ftspic.c,
src/smooth/ftspic.h, src/truetype/ttpic.c, src/truetype/ttpic.h:
Removed.
Bug introduced after release 2.8.
* src/base/ftbitmap.c (ft_bitmap_assure_buffer): We use
`FT_QALLOC_MULT', which doesn't zero out the buffer. Adjust the
bitmap copying code to take care of this fact.
This will be part of the forthcoming Unicode 11.0.
* src/autofit/afblue.dat: Add blue zone data for Mtavruli.
* src/autofit/afblue.c, src/autofit/afblue.h: Regenerated.
* src/autofit/afscript.h: Add Mtavruli standard character.
But no support new scripts (volunteers welcomed).
* src/autofit/afranges.c (af_arab_nonbase_uniranges,
af_beng_nonbase_uniranges, af_cakm_nonbase_uniranges,
af_deva_nonbase_uniranges, af_geor_uniranges,
af_gujr_nonbase_uniranges, af_mlym_nonbase_uniranges,
af_nkoo_nonbase_uniranges, af_telu_nonbase_uniranges,
af_hani_uniranges): Add new data.
Reported as
https://bugs.chromium.org/p/oss-fuzz/issues/detail?id=7371
* src/cff/cffload.c (cff_load_private_dict): Sanitize
`priv->blue_shift' and `priv->blue_fuzz' to avoid overflows later
on.
* src/type1/t1load.c (T1_Open_Face): Ditto.
* src/truetype/ttgxvar.c (ft_var_to_normalized): Don't emit number
of coordinates.
(TT_Get_MM_Var): Trace instance indices names.
(TT_Set_Var_Design): Updated.
* src/tools/apinames.c (PROGRAM_VERSION): Set to 0.3.
(OutputFormat): Add `OUTPUT_GNU_VERMAP'.
(names_dump): Handle it.
(usage): Updated.
(main): Handle new command line flag `-wL'.
* builds/unix/configure.raw: Check for resource compiler.
* builds/unix/unix-cc.in: Conditionally set up resource compiler.
* builds/freetype.mk: Add conditional rule for `ftver.rc'.
* src/base/ftver.rc: Copyright notice and year update.
According to the CFF specification, charstrings can have up to 96 stem
hints. Due to hint replacement routines in Type 1 charstrings, some
glyphs are rejected by the Adobe engine, which implements the above
limit. This fix turns off hinting for such glyphs.
* src/psaux/pshints.c (cf2_hintmap_build): Reset the error from calling
`cf2_hintmask_setAll' on a problematic Type 1 charstring and turn off
hinting.
This is necessary in case the application's memory routines differ
from FreeType. A typical example is a Python application on Windows
that calls FreeType compiled as a DLL via the `ctypes' interface.
* include/freetype/ftmm.h, src/base/ftmm.c (FT_Done_MM_Var): Declare
and define.
* docs/CHANGES: Updated.
Behdad reported that setting blend coordinates, then getting design
coordinates did incorrectly return the default instance's
coordinates.
* src/truetype/ttgxvar.c (tt_set_mm_blend): Fix it.
* include/freetype/internal/ftpsprop.h: Use `FT_BASE_CALLBACK'.
(ps_property_get): Harmonize declaration with corresponding
function typedef.
* include/freety[e/internal/fttrace.h: Add `trace_psprops'.
* src/base/ftpsprop.c: Include necessary header files.
(FT_COMPONENT): Define.
(ps_property_set): Tag with `FT_BASE_CALLBACK_DEF'.
(ps_property_get): Tag with `FT_BASE_CALLBACK_DEF'.
Harmonize declaration with corresponding function typedef.
This reduces the amount of duplicated code across PostScript drivers.
* src/cff/cffdrivr.c, src/cid/cidriver.c, src/type1/t1driver.c
({cff,cid,t1}_property_{get,set}): Moved to...
* include/freetype/internal/ftpsprop.h: ...this new file.
(ps_property_{get,set}): New functions to replace moved ones.
* src/base/ftpsprop.c: Implement above functions.
* include/freetype/internal/internal.h (FT_INTERNAL_POSTSCRIPT_PROPS_H):
New macro.
* src/cff/cffdrivr.c, src/cid/cidriver.c, src/type1/t1driver.c: Updated.
* src/base/Jamfile, src/base/rules.mk, src/base/ftbase.c: Updated.
We exit early if the current design or blend coordinates are
identical to the new ones.
* src/truetype/ttgxvar.c (tt_set_mm_blend, TT_Set_Var_Design):
Implement it, returning internal error code -1 if there will be no
variation change.
* src/type1/t1load.c (t1_set_mm_blend): Ditto.
* src/base/ftmm.c (FT_Set_Var_Design_Coordinates,
FT_Set_MM_Blend_Coordinates, FT_Set_Var_Blend_Coordinates): Updated.
The subsetted demo font of the report that exhibits the bug has a
very unusual type 2 cmap for Unicode(!): It contains only two
sub-headers, one for one-byte characters (covering the range 0x20 to
0xFA), and a second one for higher byte 0x01 (just for character
code U+0131).
Before this commit, the iterator wasn't able to correctly handle a
sub-header for higher byte 0x01.
* src/sfnt/ttcmap.c (tt_cmap2_char_next): Fix character increment
for outer loop.
* src/truetype/ttgload.c (TT_Process_Simple_Glyph): Always adjust
`pp1' to `pp4', except if we have an HVAR and/or VVAR table.
* src/truetype/ttgxvar.c (TT_Vary_Apply_Glyph_Deltas): Handle
alternative code branch identically w.r.t. presence of an HVAR
and/or VVAR table.
Stuff like
{
<bla>
}
confused the parser, which incorrectly treated `<bla>' as a markup
tag.
* src/tools/docmaker/content.py (ContentProcessor::process_content):
Apply `re_markup_tags' only outside of code sections.
This reduces redundancy and increases synergy; it also reduces the
number of header files.
* include/freetype/config/ftheader.h (FT_DRIVER_H): New macro.
(FT_AUTOHINTER_H, FT_CFF_DRIVER_H, FT_TRUETYPE_DRIVER_H,
FT_PCF_DRIVER_H, FT_TYPE1_DRIVER_H): Make them aliases to
FT_DRIVER_H.
* include/freetype/ftautoh.h, include/freetype/ftcffdrv.h,
include/freetype/ftpcfdrv.h, include/freetype/ftt1drv.h,
include/freetype/ftttdrv.h: Replaced with...
* include/freetype/ftdriver.h: ...this new file.
(FT_CFF_HINTING_ADOBE, FT_T1_HINTING_ADOBE): Renamed to...
(FT_HINTING_ADOBE): ... this new macro.
(FT_CFF_HINTING_FREETYPE, FT_T1_HINTING_FREETYPE): Renamed to...
(FT_HINTING_FREETYPE): ... this new macro.
* src/*/*: Updated accordingly.
Also reported as
https://bugs.chromium.org/p/chromium/issues/detail?id=791317
* src/base/ftbitmap.c (ft_bitmap_assure_buffer): If increasing the
bitmap size needs a larger bitmap buffer, assure that the new memory
areas are initialized also.
* include/freetype/internal/fttrace.h: Remove unused tracing macros.
s/pshalgo2/pshalgo/.
Add `trace_cffdecode'.
* src/pshinter/pshalgo.c (FT_COMPONENT): Updated.
* src/cff/cffload.c: Include FT_INTERNAL_POSTSCRIPT_AUX_H.
* src/cff/cffobjs.c: Include FT_SERVICE_METRICS_VARIATIONS_H and
FT_SERVICE_CFF_TABLE_LOAD_H.
* src/cid/cidriver.c: Include FT_INTERNAL_POSTSCRIPT_AUX_H.
* src/psaux/cffdecode.c: Include FT_FREETYPE_H and
FT_INTERNAL_DEBUG_H.
(FT_COMPONENT): Define.
* src/psaux/cffdecode.h: Include FT_INTERNAL_POSTSCRIPT_AUX_H.
* src/psaux/psauxmod.h: Include FT_INTERNAL_POSTSCRIPT_AUX_H.
Declare `cff_builder_funcs' and `ps_builder_funcs'.
* src/psaux/psft.c: Include `psobjs.h' and `cffdecode.h'.
* src/psaux/psobjs.c : Include `psauxmod.h'.
In version 2.6.1, this has been disallowed to better reject
malformed fonts; however, this restriction was too strong. This
time, we only take the first 256 elements into account, since
encoding arrays are always accessed with a 8bit integer, according
to the PostScript Language Reference.
* src/type1/t1load.c (parse_encoding): Implement it.
Some static function declarations cause unused function warnings if
certain config options are turned off via `ftoption.h'.
* src/base/ftbase.h, src/base/ftrfork.c, src/sfnt/ttbdf.h,
src/truetype/ttgxvar.h: Add #ifdef guards around these sections.
Glyph advance widths were being written to the new `PS_Decoder' but not
saved to the underlying format specific decoder. This caused pure CFF
fonts to have bad advance width.
* include/freetype/internal/psaux.h (PS_Decoder): Change `glyph_width'
field to pointer.
Remove unused fields.
* src/psaux/psobjs.c (ps_decoder_init): Change `glyph_width' from copy
to reference.
Remove unused.
* src/psaux/psft.c (cf2_setGlyphWidth): Update code.
Since Ewald Hew factored the Adobe hinting engine out of the CFF
driver code, we can now use it on Type 1 (and CID) font formats, as
both have the same hinting philosophy.
This change activates the Adobe hinter when in LIGHT mode, and
therefore always unless explicitly asking for the auto-hinter. This
makes LIGHT behavior consistent with CFF fonts. As of this commit,
the hinting engine table looks as follows.
LIGHT NORMAL
-------------------------
TrueType Auto v40
CFF Adobe Adobe
Type 1 Adobe Adobe
The interpreter in Type 1 mode rewinds the charstring after collecting
all hints for building the initial hintmap (commit d52dd7f). However,
some charstrings use `endchar' in a final subroutine call, rewinding to
the start of that subroutine, and only a small section of the actual
glyph is drawn.
* src/psaux/psintrp.c (cf2_interpT2CharString) <cf2_cmdENDCHAR>:
Ensure we are on the top level charstring before rewinding.
See the report by Yang Yinsen.
https://lists.gnu.org/archive/html/freetype-devel/2017-11/msg00000.html
* src/truetype/ttobjs.c (trick_names): Add `DFGothic-EB',
`DFGyoSho-Lt', `DFHSGothic-W5', `DFHSMincho-W3' and `DFHSMincho-W7'.
(tt_check_trickyness_sfnt_ids): Add checksums for DFGothic-EB,
DFGyoSho-Lt, DFHSGothic-W5, DFHSMincho-W3 and DFHSMincho-W7. Also
add checksums for DLCLiShu and DLCHayBold which their family names
were already listed but their checksums were previously unknown.
We used to split large glyphs into horizontal bands and continue
bisecting them still horizontally if that was not enough. This is
guaranteed to fail when a single scanline cannot fit into the
rendering memory pool. Now we bisect the bands vertically so that
the smallest unit is a column of the band height, which is guranteed
to fit into memory.
* src/smooth/ftgrays.c (gray_convert_glyph): Implement it.
At large sizes almost but not exactly horizontal segments can quickly
drain the rendering pool. This patch at least avoids filling the pool
with trivial cells. Beyond this, we can only increase the pool size.
Reported, analyzed, and tested by Colin Fahey.
* src/smooth/ftgrays.c (gray_set_cell): Do not record trivial cells.
* src/base/ftobjs.c (FT_Load_Glyph): Tag tracing messages with
function name, glyph index, and load flags.
(FT_Select_Metrics, FT_Request_Metrics): Remove all tracing.
(FT_Select_Size, FT_Request_Size): Improve tracing.
* src/base/ftobjs.c (FT_New_Library): C4702: unreachable code.
(ft_glyphslot_preset_bitmap): C4244: possible loss of data.
* src/cff/cffload.c (cff_blend_doBlend): C4244: possible loss of data.
Turn `sum' into unsigned.
In runs on Noto Naskh Arabic, this results in 89 sets created
instead of 340 before. Makes auto-hinter setup with HarfBuzz
enabled 20% to 30% faster.
* src/autofit/afshaper.c (af_shaper_get_coverage): Implement it.
Implement property service in `type1' and `cid' drivers to allow
switching between FreeType or Adobe hinting engine when both are
available.
* src/cid/cidriver.c (cid_property_{set,get}, cid_services),
src/type1/t1driver.c (t1_property_{set,get}, t1_services): Add
Properties service.
* src/cid/cidobjs.c (cid_driver_init), src/type1/t1objs.c
(T1_Driver_Init): Add default property values.
This controls whether the old Type 1 engine gets compiled into FreeType.
It is disabled by default.
* devel/ftoption.h, include/freetype/config/ftoption.h
(T1_CONFIG_OPTION_OLD_ENGINE): New macro.
* include/freetype/internal/psaux.h (PS_Decoder): Remove unused field.
* include/freetype/internal/psaux.h, src/cid/cidgload.c
(cid_load_glyph), src/psaux/psauxmod.c, src/psaux/psobjs.c
(ps_builder_add_point), src/psaux/t1decode.c
(t1_lookup_glyph_by_stdcharcode, t1_decoder_parse_glyph,
t1operator_seac, t1_decoder_parse_charstrings), src/psaux/t1decode.h,
src/type1/t1gload.c (T1_Parse_Glyph_And_Get_Char_String): Surround
relevant code with macro.
Minor code changes.
Duplicate the fast advance width calculations from the old parser. This
is to facilitate adding options for compiling out the old parser.
* src/psaux/t1decode.{c,h} (t1_decoder_parse_metrics): New function.
* include/freetype/internal/psaux.h (T1_Decoder_Funcs): New entry
`parse_metrics'.
* src/psaux/psauxmod.c: Set the new entry.
* src/type1/t1gload.c (T1_Parse_Glyph_And_Get_Char_String),
src/cid/cidgload.c (cid_load_glyph): Separate
conditional for selecting engine.
This commit completely separates the interaction between named
instances and variation functions. In particular, resetting the
variation returns to the current named instance (if set) and not to
the base font.
As a side effect, variation functions no longer change the named
instance index.
* src/cff/cffobjs.c (cff_face_init): Use MM service's `set_instance'
function.
Also apply `MVAR' table to named instances.
* src/truetype/ttgxvar.c (TT_Get_MM_Var): Add cast.
(tt_set_mm_blend): No longer check whether requested variation
coincides with a named instance.
(TT_Set_Var_Design): Use current named instance for default
coordinates.
* src/truetype/ttobjs.c (tt_face_init): Use `TT_Set_Named_Instance'.
* include/freetype/internal/cfftypes.h (CFF_FontRec): Add
`font_extra' entry.
* src/cff/cffdrivr.c (cff_ps_get_font_extra): New function to
retrieve FSType info from the embedded PostScript data.
(cff_service_ps_info): Register function.
* src/cff/cffload.c (cff_font_done): Free `font_extra'.
* src/base/ftobjs.c (FT_Load_Glyph): Preset the bitmap metrics when
appropriate but `FT_Render_Glyph' is not called.
* include/freetype/freetype.h (FT_GlyphSlotRec): Document the change.
* src/raster/ftrend1.c (ft_raster1_render): Clean up the exit.
* src/smooth/ftsmooth.c (ft_smooth_render_generic): Reduce
translations and clean up the exit.
(ft_smooth_render_lcd, ft_smooth_render_lcd): Remove unused `error'..
This mainly just extracts the code for presetting the bitmap metrics
from the monochrome, grayscale, and LCD renderers into a separate
function.
* src/base/ftobjs.c (ft_glyphslot_preset_bitmap): New function that
calculates prespective bitmap metrics for the given rendering mode.
* include/freetype/internal/ftobjs.h (ft_glyphslot_preset_bitmap):
Declare it.
* src/base/ftlcdfil.c (ft_lcd_padding): New helper function that adds
padding to CBox taking into account pecularities of LCD rendering.
* include/freetype/ftlcdfil.h (ft_lcd_padding): Declare it.
* src/raster/ftrend1.c (ft_raster1_render): Reworked to use
`ft_glyphslot_preset_bitmap'.
* src/smooth/ftsmooth.c (ft_smooth_render_generic): Ditto.
(ft_smooth_render_lcd, ft_smooth_render_lcd): The pixel_mode setting
is moved to `ft_glyphslot_preset_bitmap'.
* include/freetype/internal/psaux.h, src/psaux/psobjs.{c,h}:
Rearrange `ps_builder_init' arguments to conventional order.
* src/psaux/psft.c (cf2_decoder_parse_charstrings): Add a check and
notice for `SubFont' in Type 1 mode.
As the former only contains a single procedure, move it into
`psobjs' for simplicity. Also change the parameter order to the
conventional one.
* src/psaux/psdecode.c (ps_decoder_init): Moved to...
* src/psaux/psobjs.c: ...Here.
* src/psaux/psdecode.h, src/psaux/psobjs.h: Ditto.
* include/freetype/internal/psaux.h (PSAux_ServiceRec): Update
`ps_decoder_init' function signature.
* src/cff/cffgload.c, src/cid/cidgload.c, src/type1/t1gload.c:
Update calls.
* src/psaux/psaux.c, src/psaux/psauxmod.c: Update includes.
* src/psaux/Jamfile (_sources), src/psaux/rules.mk (PSAUX_DRV_SRC):
Update file references.
Type 1 hinting breaks sometimes when mid-charstring hints should
have been in the initial hintmap. This fix adds a preprocessing
pass that reads all hints and builds the correct initial hintmap
first, before proceeding to build the glyph outline.
* src/psaux/psintrp.c (cf2_interpT2CharString): New
`initial_map_ready' boolean flag.
Ignore outline commands and hint changes on first pass.
<cf2_cmdENDCHAR>: Add section to build hintmap and rewind.
* src/psaux/pshints.c (cf2_hintmap_dump): New function.
(cf2_hintmap_insertHint): Trace incoming and inserted hints.
(cf2_hintmap_build): Dump hintmap before and after hint adjustment.
* src/psaux/psintrp.c (cf2_interpT2CharString): Fix check for pop
results.
s/font->decoder/decoder/ where necessary.
<cf2_cmdHSTEM, cf2_cmdVSTEM, cf2_escHSTEM3, cf2_escVSTEM3>: Use
offset parameter in `cf2_doStems' instead of doing correction for
left-sidebearing.
This is similar to what was done in the `type1' module.
* src/cid/cidriver.c (t1cid_driver_class): Update declaration.
* src/cid/cidobjs.c: Include FT_TYPE1_DRIVER_H.
(cid_driver_init): Update code.
Change `t1_make_subfont' to take in the Private dict record as an
argument. This is because Type 1 and CID font records in FreeType
have this in different places.
* src/psaux/psobjs.c (t1_make_subfont): Change `T1_Face' to
`FT_Face' so that CID is also accepted.
Take `PS_Private' as an argument and let caller figure out where the
Private dict actually is.
Update references.
* include/freetype/internal/psaux.h, src/psaux/psobjs.h: Update
declaration.
* src/type1/t1gload.c (T1_Parse_Glyph_And_Get_Char_String): Update
call.
This concludes the changes needed to add Type 1 support.
* src/psaux/psintrp.c: Update includes.
(cf2_interpT2CharString) <cf2_escSEAC>: Implement this similarly to
implied seac for CFF.
* src/psaux/t1decode.c (t1_lookup_glyph_by_stdcharcode_ps): New
function to look up the glyph index.
* src/psaux/psft.c (cf2_getT1SeacComponent,
cf2_freeT1SeacComponent): New functions to get the charstrings for
seac components.
* src/psaux/t1decode.h, src/psaux/psft.h: Update declarations.
* src/psaux/psintrp.c (cf2_interpT2CharString)
<cf2_escCALLOTHERSUBR>: Fix Flex feature handling (OtherSubrs 0, 1,
2).
<cf2_cmdRMOVETO>: Do not actually move the `glyphPath' while doing
flex. This is to avoid closing the current contour.
* src/psaux/psintrp.c (cf2_interpT2CharString)
<cf2_escCALLOTHERSUBR>: Copy code from
`t1_decoder_parse_charstrings' (in `t1decode.c').
OtherSubr 3 (change hints) should reset the hintmask, so that the
new hints are applied.
Fix function calls and stack access.
* src/psaux/psintrp.c (cf2_interpT2CharString): Change how unhandled
OtherSubr results are stored. Implement the PostScript stack using
an array.
<cf2_escPOP>: Ensure that the stack is not cleared after getting
`OtherSubr' results.
Fix stack access.
* src/psaux/psintrp.c (cf2_interpT2CharString) <cf2_escDIV>: Add
Type 1 mode. Type 1 requires large integers to be followed by
`div'; cf. `Adobe Type 1 Font Format', section 6.2.
<op == 255>: Push Type 1 four-byte numbers as `Int' always. This is
to ensure `div' and `callsubr' get values they can use.
* src/psaux/psintrp.c (cf2_interpT2CharString) <cf2_cmdHSTEM,
cf2_cmdVSTEM>: Add correction for left sidebearing in Type 1 mode.
Allow adding hints mid-charstring.
<cf2_escVSTEM3, cf2_escHSTEM3>: Translate into equivalent commands
for three normal stem hints. This requires some recalculation of
stem positions.
Correction for left sidebearing.
* src/psaux/psintrp.c (cf2_doStems): `hsbw' or `sbw' must be the
first operation in a Type 1 charstring.
(cf2_interpT2CharString): Remove unused variables.
<cf2_cmdHMOVETO, cf2_cmdVMOVETO, cf2_cmdRMOVETO>: `hsbw' or `sbw'
must be the first operation in a Type 1 charstring.
<cf2_cmdHSBW, cf2_escSBW>: Fix data access and add correction for
left sidebearing.
* src/psaux/psintrp.c (cf2_interpT2CharString) <c2f_cmdCLOSEPATH>:
Use the right builder function. We can use the `haveWidth' boolean
already present, instead of implementing `parse_state'.
The following Type 1 specific ops have been added (copied from
`t1decode'):
closepath
vstem3
hstem3
seac
sbw
callothersubr
pop
setcurrentpoint
hsbw
The following require a Type 1 mode, because of differences in
specification:
hstem
vstem
vmoveto
callsubr
div
rmoveto
hmoveto
Numbers
The subsequent commits will implement these changes and adapt
accesses of data and objects to the new interpreter.
NOTE: Will not compile in the meantime!
* src/psaux/psintrp.c: Add opcodes to enum.
(cf2_interpT2CharString): Copy relevant code over from
`t1_decoder_parse_charstrings' (in `t1decode.c').
The Type 1 advance width calculation passes null for glyph slot,
etc, which can cause null pointer access in the new interpreter.
Fall back to the old one for now.
Fix the large glyph retry code and ensure hinting and scaling flags
are set properly.
* src/type1/t1gload.c (T1_Parse_Glyph_And_Get_Char_String): Add a
check for metrics_only.
Set the `force_scaling' flag.
(T1_Parse_Glyph): Updated.
(T1_Load_Glyph): Add `hinting' and `scaled' flags.
Synthesize a `SubFont' object for Type 1 fonts. This is used in the
interpreter to access Private dict data, which are stored in
different places for Type 1 and CFF. This allows the same data to
be used in either mode.
* src/psaux/psobjs.c (t1_make_subfont): New procedure to copy
required values to a dummy `CFF_SubFont' object. This is similar to
`cff_make_private_dict'.
* src/psaux/psobjs.h: Add the new declaration.
* include/freetype/internal/psaux.h, src/psaux/psauxmod.c: Ditto.
Add this to the PSAux Service for future use with CID fonts.
* src/type1/t1gload.c: Include FT_INTERNAL_CFF_TYPES_H.
(T1_Parse_Glyph_And_Get_Char_String): Add the call.
Move `CF2_Font' instance to `PS_Decoder'. This is the context for
the interpreter and since it is currently stored in `CFF_Font', is
unavailable in Type 1 mode.
* include/freetype/internal/psaux.h (T1_Decoder, PS_Decoder): New
`cf2_instance' field.
* src/psaux/psdecode.c (ps_decoder_init): Copy `cf2_instance' to
`PS_Decoder'.
* src/psaux/t1decode.c (t1_decoder_done): Add finalization code.
* src/psaux/psft.c (cf2_decoder_parse_charstrings): Update accesses.
Add the callback and some conditionals to switch between the two
engines.
* include/freetype/internal/psaux.h (T1_Decoder_FuncsRec): Change
function declarations.
* src/psaux/psauxmod.c (T1_Decoder_FuncsRec): Register the
callbacks.
* src/psaux/psobjs.c (ps_builder_add_point): Add conditionals for
number conversion.
* src/type1/t1gload.c (T1_Parse_Glyph_And_Get_Char_String): Add code
to choose which renderer to use.
* src/cid/cidgload.c (cid_load_glyph): Update call.
* src/base/ftobjs.c, src/psaux/psobjs.c, src/type1/t1gload.c: Update
includes.
Use the previously changed PS_Driver in type1 module to store
hinting engine configuration.
* include/freetype/ftt1drv.h: New file.
Duplicate and rename config options from CFF.
* include/freetype/config/ftheader.h (FT_TYPE1_DRIVER_H): New macro.
* src/type1/t1driver.c (t1_driver_class): Update declaration.
* src/type1/t1objs.c: Include FT_TYPE1_DRIVER_H.
(T1_Driver_Init): Update code.
This is so that we can use the same hinting engine parameters for
Type 1.
* include/freetype/internal/cffotypes.h (CFF_Driver): Rename and
move to...
* include/freetype/internal/psaux.h (PS_Driver): ...here.
* src/cff/cffdrivr.c, src/cff/cffgload.c, src/cff/cffload.c,
src/cff/cffobjs.c, src/cff/cffobjs.h, src/psaux/psft.c,
src/psaux/psobjs.c: Update references.
Make some fields more generic, so that we can access them the same
way regardless of Type 1 or CFF.
* include/freetype/internal/psaux.h (PS_Builder): Change `TT_Face'
to `FT_Face'.
Remove unused fields.
* src/psaux/psft.c: Update all accesses of `PS_Builder.face'.
Add some asserts to guard against casting `T1_Face' as `TT_Face'.
* src/type1/t1objs.h (T1_GlyphSlot): Reorder fields to follow
`CFF_GlyphSlot', so that we can pretend they are the same in the
interpreter.
* src/psaux/psobjs.c (ps_builder_init, ps_builder_add_point):
Updated with above changes.
Add some checks for Type 1 data passing through.
* src/psaux/psfont.h (CF2_Font): Add `isT1' flag.
* src/psaux/psfont.c (cf2_font_setup): Skip the variations and blend
code which is not applicable for Type 1.
* src/psaux/psft.c (cf2_decoder_parse_charstrings): Avoid accessing
`decoder->cff' in Type 1 mode.
Copy `is_t1' flag to `CF2_Font'.
* include/freetype/internal/psaux.h, src/psaux/psauxmod.c: Fix
switching between new and old engines.
* src/cff/cffgload.c, src/cff/cffparse.c: Update calls.
* src/psaux/psblues.c, src/psaux/psfont.c, src/psaux/psfont.h,
src/psaux/psft.c, src/psaux/psft.h, src/psaux/psintrp.c: Update all
to use new objects.
Make the new objects copy over values. They are essentially wrapper
types for the different decoders/builders.
* include/freetype/internal/psaux.h: Update declarations.
(PS_Builder): Add `is_t1' flag.
(PS_Decoder_{Get,Free}_Glyph_Callback): Renamed to...
(CFF_Decoder_{Get,Free}_Glyph_Callback: ... this.
(PS_Decoder): Updated.
Add `t1_parse_callback' member.
(PSAux_ServiceRec): Add `ps_decoder_init' member.
* src/psaux/psdecode.h, src/psaux/psobjs.h: Update declarations.
* src/psaux/psdecode.c, src/psaux/psobjs.c: Implement copy with two
modes.
* src/psaux/psauxmod.c: Add builder and decoder functions to `PSAux'
service.
Introduce `PS_Decoder' and `PS_Builder' which include all fields
from either Type 1 or CFF decoders/builders.
* include/freetype/internal/psaux.h (PS_Builder, PS_Decoder): New
structs.
* src/psaux/psobjs.c, src/psaux/psobjs.h: Add `PS_Builder'
functions.
* src/psaux/psdecode.c, src/psaux/psdecode.h: New files to hold
`PS_Decoder' initialization functions.
* src/psaux/psaux.c, src/psaux/Jamfile (_sources),
src/psaux/rules.mk (PSAUX_DRV_SRC): Updated.
Replace the `cf2' file name prefix with `ps' as the Adobe engine
will be used for both PostScript Types 1 and 2 (CFF) instead of just
CFF.
s/cf2/ps/ for all following.
* src/psaux/cf2*: Rename files.
* src/psaux/*: Update includes.
* src/psaux/Jamfile (_sources), src/psaux/rules.mk (PSAUX_DRC_SRC,
PSAUX_DRV_H): Update file references.
Use `MultiMasters' service in `psaux' instead of a call to `cff'.
The project builds if CFF_CONFIG_OPTION_OLD_ENGINE is not defined.
* src/psaux/cf2ft.c: Update includes.
(cf2_getNormalizedVector): Use `mm->get_var_blend' instead of
`cff_get_var_blend'.
NOTE: Does not compile!
Minor fix to allow both `cff' and `psaux' to use `cff_random'.
* src/cff/cffload.c (cff_random): Move to...
* src/psaux/psobjs.c: Here.
* src/cff/cffload.h: Move corresponding declaration to
`src/psaux/psobjs.h'.
* include/freetype/internal/psaux.h (PSAux_ServiceRec): Register the
function here...
* src/psaux/psauxmod.c: And here.
* src/cff/cffload.c, src/psaux/cf2intrp.c: Update code.
NOTE: Does not compile!
This is so that the CFF functions moved to `psaux' can access the
same structs that they need.
* src/cff/cfftypes.h: Moved to...
* include/freetype/internal/cfftypes.h: ...Here.
* src/cff/cffobjs.h: Moved the struct declarations to...
* include/freetype/internal/cffotypes.h: ... this new file.
* include/freetype/internal/internal.h (FT_INTERNAL_CFF_TYPES_H,
FT_INTERNAL_CFF_OBJECT_TYPES_H): New macros.
* src/cff/cffcmap.h, src/cff/cffdrivr.c, src/cff/cffgload.c,
src/cff/cffgload.h, src/cff/cffload.h, src/cff/cffobjs.c,
src/cff/cffobjs.h, src/cff/cffparse.h, src/psaux/psobjs.h,
include/freetype/internal/psaux.h,
include/freetype/internal/services/svcfftl.h: Update includes.
* src/cff/rules.mk (CFF_DRV_H): Updated.
NOTE: Does not compile!
This is to allow CFF functions moved to `psaux' to call functions
declared in `src/cff/cffload.h'.
* include/freetype/internal/services/svcfftl.h: New file, setting up
a `CFFLoad' service.
* include/freetype/internal/ftserv.h (FT_DEFINE_SERVICEDESCREC10,
FT_DEFINE_SERVICEDESCREC): New macros.
(FT_SERVICE_CFF_TABLE_LOAD_H): New macro.
* src/cff/cffdrivr.c, src/cff/cffpic.h: Register the new service.
* src/cff/cfftypes.h (CFF_FontRec), src/psaux/cf2font.h
(CF2_FontRec): Add service interface.
* src/cff/cffobjs.c, src/psaux/cf2font.c, src/psaux/cf2ft.c,
src/psaux/cf2intrp.c, src/psaux/cffdecode.c: Use the new service.
NOTE: Does not compile!
* include/freetype/internal/psaux.h: Add function pointer
declarations.
* src/psaux/cffdecode.c (cff_decoder_init): Update to take in
callbacks.
* src/psaux/cffdecode.h: Ditto.
* src/cff/cffgload.c (cff_compute_max_advance, cff_slot_load):
Update calls to pass in callbacks.
* src/psaux/cf2ft.c, src/psaux/cffdecode.c: Use them.
NOTE: Does not compile!
* include/freetype/internal/psaux.h: Include
FT_INTERNAL_TRUETYPE_TYPES_H.
(CFF_Builder_FuncsRec, CFF_Decocer_FuncsRec): New function tables.
(CFF_Builder): Updated.
Fix for forward declaration.
(PSAux_ServiceRec): New field `cff_decoder_funcs'.
* src/psaux/psauxmod.c (cff_builder_funcs, cff_decoder_funcs): New
function tables.
(PSAux_Interface): Updated.
* include/freetype/internal/tttypes.h (TT_FaceRec): Add `psaux'
service interface.
* src/cff/cffgload.c, src/cff/cffobjs.c, src/cff/cffparse.c: Update
function calls to use psaux service.
This is the first patch of a sequence to move the Type 2 charstring
processing capability from the `cff' module to the `psaux' module.
NOTE: Does not compile!
* src/cff/cf2*: Move these files to...
* src/psaux/cf2*: Here.
* src/cff/Jamfile (_sources), src/cff/rules.mk (CFF_DRV_SRC,
CFF_DRV_H), src/cff/cff.c, src/cff/cffgload.c: Remove file
references.
* src/psaux/Jamfile (_sources), src/psaux/rules.mk, src/psaux/psaux.c
(PSAUX_DRV_SRC, PSAUX_DRV_H): Add file references.
Thing are simpler with a NULL-function pointer.
* include/freetype/internal/ftobjs.h (FT_Face_InternalRec): New
pointer to the filter function.
(FT_LibraryRec): Remove unused `lcd_filter'.
(FT_Bitmap_LcdFilterFunc, ft_lcd_filter_fir): Move from here...
* include/freetype/ftlcdfil.h (FT_Bitmap_LcdFilterFunc,
ft_lcd_filter_fir): ... to here.
* src/base/ftobjs.c (ft_open_face_internal): NULL-initialize the
per-face filter.
(FT_Face_Properties): Set it.
* src/smooth/ftsmooth.c (ft_smooth_render_generic): Simplify.
* src/base/ftlcdfil.c (ft_lcd_filter_fir, FT_Libary_SetLcdFilter):
Minor.
For GPOS pair positioning format 1 the description of ValueRecords
in the OpenType specification (1.8.2, from today) is wrong – the
offset has to be taken from the parent structure; in this case the
`PairSet' table.
* src/otvalid/otvgpos.c (otv_PairSet_validate): Set `extra3'.
(otv_PairPos_validate): Adjust.
Without this change, clang's AddressSanitizer reports many runtime
errors due to misaligned addresses.
* src/truetype/ttgxvar.c (TT_Get_MM_Var): Use multiples of pointer
size for sub-array offsets into `mmvar'.
1. If `FamilyName' is present in the CFF font, use this for
FT_Face's `family_name'.
2. Otherwise, use the face name and chop off any subset prefix.
3. If at this point FT_Face's `family_name' is set, use this
together with the full name to determine the style.
4. Otherwise, use `CIDFontName' as FT_Face's `family_name'.
5. If we don't have a valid style, use "Regular".
Previously, FT_Face's `family_name' entry for pure CFF fontdata
nearly always was the fontname itself, instead of the `FamilyName'
entry in the CFF font (assuming there is one).
* src/cff/cffobjs.c (cff_face_init) [pure_cff]: Implement it.
__builtin_shuffle() was introduced in gcc-4.7. The lowest
gcc to enable vector operation is delayed from 4.6 to 4.7.
* src/sfnt/pngshim.c (premultiply_data): Fix cpp-macro to
enable the vector operation, to change the lowest gcc version
from 4.6 to 4.7.
Improve the code by 5d3ff05615dda6d1325ed612381a17a0df04c975 ,
issues are found by Behdad Esfahbod and Werner Lemberg.
* src/cache/ftcbasic.c (FTC_ImageCache_Lookup): Replace
a subtraction to check higher bit by a bit operation,
and cpp-conditionalize for appropriate systems. Add better
documentation to the comment.
(FTC_ImageCache_LookupScaler): Ditto.
(FTC_SBitCache_Lookup): Ditto.
(FTC_SBitCache_LookupScaler): Ditto.
* src/autofit/afshaper.c: Include FT_ADVANCE_H, to use
FT_Get_Advance() in it.
* src/sfnt/ttcmap.c: Include FT_SERVICE_POSTSCRIPT_CMAPS_H
to use PS_Unicodes in it, also include `ttpost.h' to use
tt_face_get_ps_name() in it.
LastResort.dfont has a marginal resource ID 0xFFFF for sfnt
resource. Inside Macintosh: More Macintosh Toolbox, `Resource IDs'
(1-46), tells that some IDs are reserved and should not be used.
FreeType2 just uses resource ID to sort the fragmented resource.
To accept the marginal fonts, the checking is removed.
* src/base/ftrfork.c (FT_Raccess_Get_DataOffsets): Remove res_id
validity check, fix a trace message format.
The first 32bit of standard TrueType variants is 0x00010000,
`OTTO', `ttcf', `true' or `typ1'. 2 marginal dfonts on legacy Mac
OS X, Keyboard.dfont and LastResort.dfont, have the sfnt resources
starting 0xA5 followed by `kbd' or `lst'. Considering the following
data could be parsed as conventional TrueType fonts, the header
checking is updated to allow these tags. It seems that recent Mac
OS X has already switched to normal TTF for these fonts.
See the discussion at
http://u88.n24.queensu.ca/exiftool/forum/index.php?topic=3931.0
* include/freetype/tttags.h (TTAG_0xA5kbd, TTAG_0xA5lst): New header
tags for Keyboard.dfont and LastResort.dfont.
* src/sfnt/sfobjs.c (sfnt_open_font): Accept the sfnt resource
starts with TTAG_0xA5kbd or TTAG_0xA5lst.
* src/truetype/ttobjs.c (tt_face_init): Accept the face with the
format tag is TTAG_0xA5kbd or TTAG_0xA5lst.
The documentation of `FT_Bitmap_Convert' says that multiple calls do
proper reallocation of the target FT_Bitmap object. However, this
failed for the sequence
non-empty bitmap
empty bitmap
non-empty bitmap
Reason was that `FT_Bitmap_Convert' only reallocated the bitmap
buffer if it became too small; it didn't make the buffer smaller.
For an empty bitmap following a non-empty one, only the buffer
dimension got set to zero, without deallocation. If the next call
was a non-empty buffer again, an assertion in `ft_mem_qrealloc' was
triggered.
* src/base/ftbitmap.c (FT_Bitmap_Convert): Always reallocate target
buffer to the correct size.
* docs/CHANGES: Document it.
* src/bdf/bdfdrivr.c (BDF_Face_Init): Use `SIZE' values if
`POINT_SIZE', `RESOLUTION_X', or `RESOLUTION_Y' properties are
missing.
* docs/CHANGES: Document it.
* src/sfnt/pngshim.c (premultiply_data): Use vectors instead of
scalars.
(vector_shuffle): New macro to take of a different built-in function
name on clang.
This reduces the overhead of `premultiply_data' by 60%.
* src/sfnt/pngshim.c (premultiply_data): Provide code which uses
gcc's (and clang's) `vector_byte' attribute to process 4 pixels at a
time.
Requested by Behdad.
Modern bitmap-only SFNTs like `NotoColorEmoji.ttf' don't contain
entries in the bitmap strike(s) for empty glyphs. Instead, they
rely that a space glyph gets created from the font's metrics data.
This commit makes FreeType behave accordingly.
* include/freetype/fterrdef.h (FT_Err_Missing_Bitmap): New error
code.
* src/sfnt/ttsbit.c (tt_sbit_decoder_load_image): Change error codes
to make a distinction between a missing bitmap in a composite and a
simple missing bitmap.
* src/truetype/ttgload.c (TT_Load_Glyph): For a missing bitmap (in a
bitmap-only font), synthesize an empty bitmap glyph if metrics are
available.
We now use a separate preprocessor macro to handle both definition
and declaration of the glyph name arrays.
* src/psnames/psmodule.c (DEFINE_PS_TABLE_DATA): New macro.
* src/tools/glnames.py (StringTable::dump,
StringTable::dump_sublist): Use `DEFINE_PS_TABLE_DATA'.
(dump_encoding): Ditto.
(main): Use `wb' mode for writing the output file, which works on
Windows also.
* src/psnames/pstables.h: Regenerated.
This is a new technology for LCD-optimized rendering. It capitalizes
on the fact that each color channel grid is shifted by a third of a
pixel. Therefore it is logical to render 3 separate monochrome
bitmaps shifting the outline by 1/3 pixel, and then combine them.
Importantly, the resulting output does not require additional LCD
filtering.
* src/smooth/ftsmooth.c (ft_smooth_render_generic)
[!FT_CONFIG_OPTION_SUBPIXEL_RENDERING]: Implement new LCD-optimized
rendering.
* include/freetype/ftlcdfil.h, include/freetype/freetype.h,
include/freetype/config/ftoption.h, devel/ftoption.h: Updated
documentation.
The reserved `flags' field got a value in OpenType version 1.8.2;
unfortunately, the public `FT_Var_Axis' structure misses the
corresponding element. Since we can't add a new field, we add an
access function.
* src/base/ftmm.c (FT_Get_Var_Axis_Flags): New function.
* include/freetype/ftmm.h (FT_VAR_AXIS_FLAG_HIDDEN): New macro.
Updated.
* src/truetype/ttgxvar.c (TT_Get_MM_Var): Increase allocated memory
of `mmvar' to hold axis flags.
Fill the axis flags array.
* docs/CHANGES: Updated.
Phantom points are now saved outside v40 backwards compatibility
mode. This fixes the jumping glyphs when switching between v35 and
v40 monochrome mode.
* src/truetype/ttgload.c (TT_Hint_Glyph): Fix inversed bool logic.
This fixes weird behavior of instructions that resulted in rendering
differences between v35 and v40 in monochrome mode, e.g., in
`timesbi.ttf'.
* src/truetype/ttinterp.c (Ins_GETINFO)
[TT_SUPPORT_SUBPIXEL_HINTING_MINIMAL]: Check
`subpixel_hinting_lean'.
* src/sfnt/sfobjs.c (sfnt_load_face): The units per EM value has now
(tighter) limits.
* src/truetype/ttgload.c (load_truetype_glyph): The new OpenType
version explicitly allows all negative values for the number of
contours if we have a composite glyph (this is for better backwards
compatibility I guess), but it still recommends value -1.
While clang's sanitizer recommends a cast to unsigned for safe
negation (to handle -INT_MIN), both MSVC and Visualc emit warning
C4146 if an unsigned value gets negated.
* include/freetype/internal/ftcalc.h (NEG_LONG, NEG_INT32),
src/base/ftcalc.c (FT_MOVE_SIGN): Replace negation with a
subtraction.
Reported by Nikolaus Waxweiler <madigens@gmail.com>.
* src/truetype/ttgxvar.c (TT_Set_Var_Design): Correctly handle the
case where we have less input coordinates than axes.
