Files
SRB2Kart-Saturn/src/r_draw8.c
T
Alug b6daafec17 Realloc software lookups for current screen res instead of MAXVID define
so the thing just allocs what it needs, so it can perform as good as it can on any resolution
2024-02-13 12:44:05 +01:00

1688 lines
46 KiB
C

// SONIC ROBO BLAST 2
//-----------------------------------------------------------------------------
// Copyright (C) 1998-2000 by DooM Legacy Team.
// Copyright (C) 1999-2018 by Sonic Team Junior.
//
// This program is free software distributed under the
// terms of the GNU General Public License, version 2.
// See the 'LICENSE' file for more details.
//-----------------------------------------------------------------------------
/// \file r_draw8.c
/// \brief 8bpp span/column drawer functions
/// \note no includes because this is included as part of r_draw.c
// ==========================================================================
// COLUMNS
// ==========================================================================
// A column is a vertical slice/span of a wall texture that uses
// a has a constant z depth from top to bottom.
//
/** \brief The R_DrawColumn_8 function
Experiment to make software go faster. Taken from the Boom source
*/
void R_DrawColumn_8(void)
{
INT32 count;
register UINT8 *dest;
register fixed_t frac;
fixed_t fracstep;
count = dc_yh - dc_yl;
if (count < 0) // Zero length, column does not exceed a pixel.
return;
#ifdef RANGECHECK
if ((unsigned)dc_x >= (unsigned)vid.width || dc_yl < 0 || dc_yh >= vid.height)
return;
#endif
// Framebuffer destination address.
dest = &topleft[dc_yl*vid.width + dc_x];
count++;
// Determine scaling, which is the only mapping to be done.
fracstep = dc_iscale;
frac = dc_texturemid + FixedMul((dc_yl << FRACBITS) - centeryfrac, fracstep);
// Inner loop that does the actual texture mapping, e.g. a DDA-like scaling.
// This is as fast as it gets.
{
register const UINT8 *source = dc_source;
register const lighttable_t *colormap = dc_colormap;
register INT32 heightmask = dc_texheight-1;
if (dc_texheight & heightmask) // not a power of 2 -- killough
{
heightmask++;
heightmask <<= FRACBITS;
if (frac < 0)
while ((frac += heightmask) < 0);
else
while (frac >= heightmask)
frac -= heightmask;
do
{
// Re-map color indices from wall texture column
// using a lighting/special effects LUT.
// heightmask is the Tutti-Frutti fix
*dest = colormap[source[frac>>FRACBITS]];
dest += vid.width;
// Avoid overflow.
if (fracstep > 0x7FFFFFFF - frac)
frac += fracstep - heightmask;
else
frac += fracstep;
while (frac >= heightmask)
frac -= heightmask;
} while (--count);
}
else
{
while ((count -= 2) >= 0) // texture height is a power of 2
{
*dest = colormap[source[(frac>>FRACBITS) & heightmask]];
dest += vid.width;
frac += fracstep;
*dest = colormap[source[(frac>>FRACBITS) & heightmask]];
dest += vid.width;
frac += fracstep;
}
if (count & 1)
*dest = colormap[source[(frac>>FRACBITS) & heightmask]];
}
}
}
void R_Draw2sMultiPatchColumn_8(void)
{
INT32 count;
register UINT8 *dest;
register fixed_t frac;
fixed_t fracstep;
count = dc_yh - dc_yl;
if (count < 0) // Zero length, column does not exceed a pixel.
return;
#ifdef RANGECHECK
if ((unsigned)dc_x >= (unsigned)vid.width || dc_yl < 0 || dc_yh >= vid.height)
return;
#endif
// Framebuffer destination address.
dest = &topleft[dc_yl*vid.width + dc_x];
count++;
// Determine scaling, which is the only mapping to be done.
fracstep = dc_iscale;
frac = dc_texturemid + FixedMul((dc_yl << FRACBITS) - centeryfrac, fracstep);
// Inner loop that does the actual texture mapping, e.g. a DDA-like scaling.
// This is as fast as it gets.
{
register const UINT8 *source = dc_source;
register const lighttable_t *colormap = dc_colormap;
register INT32 heightmask = dc_texheight-1;
register UINT8 val;
if (dc_texheight & heightmask) // not a power of 2 -- killough
{
heightmask++;
heightmask <<= FRACBITS;
if (frac < 0)
while ((frac += heightmask) < 0);
else
while (frac >= heightmask)
frac -= heightmask;
do
{
// Re-map color indices from wall texture column
// using a lighting/special effects LUT.
// heightmask is the Tutti-Frutti fix
val = source[frac>>FRACBITS];
if (val != TRANSPARENTPIXEL)
*dest = colormap[val];
dest += vid.width;
// Avoid overflow.
if (fracstep > 0x7FFFFFFF - frac)
frac += fracstep - heightmask;
else
frac += fracstep;
while (frac >= heightmask)
frac -= heightmask;
} while (--count);
}
else
{
while ((count -= 2) >= 0) // texture height is a power of 2
{
val = source[(frac>>FRACBITS) & heightmask];
if (val != TRANSPARENTPIXEL)
*dest = colormap[val];
dest += vid.width;
frac += fracstep;
val = source[(frac>>FRACBITS) & heightmask];
if (val != TRANSPARENTPIXEL)
*dest = colormap[val];
dest += vid.width;
frac += fracstep;
}
if (count & 1)
{
val = source[(frac>>FRACBITS) & heightmask];
if (val != TRANSPARENTPIXEL)
*dest = colormap[val];
}
}
}
}
void R_Draw2sMultiPatchTranslucentColumn_8(void)
{
INT32 count;
register UINT8 *dest;
register fixed_t frac;
fixed_t fracstep;
count = dc_yh - dc_yl;
if (count < 0) // Zero length, column does not exceed a pixel.
return;
#ifdef RANGECHECK
if ((unsigned)dc_x >= (unsigned)vid.width || dc_yl < 0 || dc_yh >= vid.height)
return;
#endif
// Framebuffer destination address.
dest = &topleft[dc_yl*vid.width + dc_x];
count++;
// Determine scaling, which is the only mapping to be done.
fracstep = dc_iscale;
//frac = dc_texturemid + (dc_yl - centery)*fracstep;
frac = dc_texturemid + FixedMul((dc_yl << FRACBITS) - centeryfrac, fracstep);
// Inner loop that does the actual texture mapping, e.g. a DDA-like scaling.
// This is as fast as it gets.
{
register const UINT8 *source = dc_source;
register const UINT8 *transmap = dc_transmap;
register const lighttable_t *colormap = dc_colormap;
register INT32 heightmask = dc_texheight-1;
register UINT8 val;
if (dc_texheight & heightmask) // not a power of 2 -- killough
{
heightmask++;
heightmask <<= FRACBITS;
if (frac < 0)
while ((frac += heightmask) < 0);
else
while (frac >= heightmask)
frac -= heightmask;
do
{
// Re-map color indices from wall texture column
// using a lighting/special effects LUT.
// heightmask is the Tutti-Frutti fix
val = source[frac>>FRACBITS];
if (val != TRANSPARENTPIXEL)
*dest = *(transmap + (colormap[val]<<8) + (*dest));
dest += vid.width;
// Avoid overflow.
if (fracstep > 0x7FFFFFFF - frac)
frac += fracstep - heightmask;
else
frac += fracstep;
while (frac >= heightmask)
frac -= heightmask;
} while (--count);
}
else
{
while ((count -= 2) >= 0) // texture height is a power of 2
{
val = source[(frac>>FRACBITS) & heightmask];
if (val != TRANSPARENTPIXEL)
*dest = *(transmap + (colormap[val]<<8) + (*dest));
dest += vid.width;
frac += fracstep;
val = source[(frac>>FRACBITS) & heightmask];
if (val != TRANSPARENTPIXEL)
*dest = *(transmap + (colormap[val]<<8) + (*dest));
dest += vid.width;
frac += fracstep;
}
if (count & 1)
{
val = source[(frac>>FRACBITS) & heightmask];
if (val != TRANSPARENTPIXEL)
*dest = *(transmap + (colormap[val]<<8) + (*dest));
}
}
}
}
/** \brief The R_DrawShadeColumn_8 function
Experiment to make software go faster. Taken from the Boom source
*/
void R_DrawShadeColumn_8(void)
{
register INT32 count;
register UINT8 *dest;
register fixed_t frac, fracstep;
// check out coords for src*
if ((dc_yl < 0) || (dc_x >= vid.width))
return;
count = dc_yh - dc_yl;
if (count < 0)
return;
#ifdef RANGECHECK
if ((unsigned)dc_x >= (unsigned)vid.width || dc_yl < 0 || dc_yh >= vid.height)
I_Error("R_DrawShadeColumn_8: %d to %d at %d", dc_yl, dc_yh, dc_x);
#endif
dest = &topleft[dc_yl*vid.width + dc_x];
// Looks familiar.
fracstep = dc_iscale;
frac = dc_texturemid + FixedMul((dc_yl << FRACBITS) - centeryfrac, fracstep);
// Here we do an additional index re-mapping.
do
{
*dest = colormaps[(dc_source[frac>>FRACBITS] <<8) + (*dest)];
dest += vid.width;
frac += fracstep;
} while (count--);
}
/** \brief The R_DrawTranslucentColumn_8 function
I've made an asm routine for the transparency, because it slows down
a lot in 640x480 with big sprites (bfg on all screen, or transparent
walls on fullscreen)
*/
void R_DrawTranslucentColumn_8(void)
{
register INT32 count;
register UINT8 *dest;
register fixed_t frac, fracstep;
count = dc_yh - dc_yl + 1;
if (count <= 0) // Zero length, column does not exceed a pixel.
return;
#ifdef RANGECHECK
if ((unsigned)dc_x >= (unsigned)vid.width || dc_yl < 0 || dc_yh >= vid.height)
I_Error("R_DrawTranslucentColumn_8: %d to %d at %d", dc_yl, dc_yh, dc_x);
#endif
dest = &topleft[dc_yl*vid.width + dc_x];
// Looks familiar.
fracstep = dc_iscale;
frac = dc_texturemid + FixedMul((dc_yl << FRACBITS) - centeryfrac, fracstep);
// Inner loop that does the actual texture mapping, e.g. a DDA-like scaling.
// This is as fast as it gets.
{
register const UINT8 *source = dc_source;
register const UINT8 *transmap = dc_transmap;
register const lighttable_t *colormap = dc_colormap;
register INT32 heightmask = dc_texheight - 1;
if (dc_texheight & heightmask)
{
heightmask++;
heightmask <<= FRACBITS;
if (frac < 0)
while ((frac += heightmask) < 0)
;
else
while (frac >= heightmask)
frac -= heightmask;
do
{
// Re-map color indices from wall texture column
// using a lighting/special effects LUT.
// heightmask is the Tutti-Frutti fix
*dest = *(transmap + (colormap[source[frac>>FRACBITS]]<<8) + (*dest));
dest += vid.width;
if ((frac += fracstep) >= heightmask)
frac -= heightmask;
}
while (--count);
}
else
{
while ((count -= 2) >= 0) // texture height is a power of 2
{
*dest = *(transmap + (colormap[source[(frac>>FRACBITS)&heightmask]]<<8) + (*dest));
dest += vid.width;
frac += fracstep;
*dest = *(transmap + (colormap[source[(frac>>FRACBITS)&heightmask]]<<8) + (*dest));
dest += vid.width;
frac += fracstep;
}
if (count & 1)
*dest = *(transmap + (colormap[source[(frac>>FRACBITS)&heightmask]]<<8) + (*dest));
}
}
}
/** \brief The R_DrawTranslatedTranslucentColumn_8 function
Spiffy function. Not only does it colormap a sprite, but does translucency as well.
Uber-kudos to Cyan Helkaraxe
*/
void R_DrawTranslatedTranslucentColumn_8(void)
{
register INT32 count;
register UINT8 *dest;
register fixed_t frac, fracstep;
count = dc_yh - dc_yl + 1;
if (count <= 0) // Zero length, column does not exceed a pixel.
return;
dest = &topleft[dc_yl*vid.width + dc_x];
// Looks familiar.
fracstep = dc_iscale;
frac = dc_texturemid + FixedMul((dc_yl << FRACBITS) - centeryfrac, fracstep);
// Inner loop that does the actual texture mapping, e.g. a DDA-like scaling.
// This is as fast as it gets.
{
register INT32 heightmask = dc_texheight - 1;
if (dc_texheight & heightmask)
{
heightmask++;
heightmask <<= FRACBITS;
if (frac < 0)
while ((frac += heightmask) < 0)
;
else
while (frac >= heightmask)
frac -= heightmask;
do
{
// Re-map color indices from wall texture column
// using a lighting/special effects LUT.
// heightmask is the Tutti-Frutti fix
*dest = *(dc_transmap + (dc_colormap[dc_translation[dc_source[frac>>FRACBITS]]]<<8) + (*dest));
dest += vid.width;
if ((frac += fracstep) >= heightmask)
frac -= heightmask;
}
while (--count);
}
else
{
while ((count -= 2) >= 0) // texture height is a power of 2
{
*dest = *(dc_transmap + (dc_colormap[dc_translation[dc_source[(frac>>FRACBITS)&heightmask]]]<<8) + (*dest));
dest += vid.width;
frac += fracstep;
*dest = *(dc_transmap + (dc_colormap[dc_translation[dc_source[(frac>>FRACBITS)&heightmask]]]<<8) + (*dest));
dest += vid.width;
frac += fracstep;
}
if (count & 1)
*dest = *(dc_transmap + (dc_colormap[dc_translation[dc_source[(frac>>FRACBITS)&heightmask]]]<<8) + (*dest));
}
}
}
/** \brief The R_DrawTranslatedColumn_8 function
Draw columns up to 128 high but remap the green ramp to other colors
\warning STILL NOT IN ASM, TO DO..
*/
void R_DrawTranslatedColumn_8(void)
{
register INT32 count;
register UINT8 *dest;
register fixed_t frac, fracstep;
count = dc_yh - dc_yl;
if (count < 0)
return;
#ifdef RANGECHECK
if ((unsigned)dc_x >= (unsigned)vid.width || dc_yl < 0 || dc_yh >= vid.height)
I_Error("R_DrawTranslatedColumn_8: %d to %d at %d", dc_yl, dc_yh, dc_x);
#endif
dest = &topleft[dc_yl*vid.width + dc_x];
// Looks familiar.
fracstep = dc_iscale;
frac = dc_texturemid + FixedMul((dc_yl << FRACBITS) - centeryfrac, fracstep);
// Here we do an additional index re-mapping.
do
{
// Translation tables are used
// to map certain colorramps to other ones,
// used with PLAY sprites.
// Thus the "green" ramp of the player 0 sprite
// is mapped to gray, red, black/indigo.
*dest = dc_colormap[dc_translation[dc_source[frac>>FRACBITS]]];
dest += vid.width;
frac += fracstep;
} while (count--);
}
// ==========================================================================
// SPANS
// ==========================================================================
/** \brief The R_DrawSpan_8 function
Draws the actual span.
*/
void R_DrawSpan_8 (void)
{
fixed_t xposition;
fixed_t yposition;
fixed_t xstep, ystep;
UINT8 *source;
UINT8 *colormap;
UINT8 *dest;
const UINT8 *deststop = screens[0] + vid.rowbytes * vid.height;
size_t count = (ds_x2 - ds_x1 + 1);
xposition = ds_xfrac; yposition = ds_yfrac;
xstep = ds_xstep; ystep = ds_ystep;
// SoM: we only need 6 bits for the integer part (0 thru 63) so the rest
// can be used for the fraction part. This allows calculation of the memory address in the
// texture with two shifts, an OR and one AND. (see below)
// for texture sizes > 64 the amount of precision we can allow will decrease, but only by one
// bit per power of two (obviously)
// Ok, because I was able to eliminate the variable spot below, this function is now FASTER
// than the original span renderer. Whodathunkit?
xposition <<= nflatshiftup; yposition <<= nflatshiftup;
xstep <<= nflatshiftup; ystep <<= nflatshiftup;
source = ds_source;
colormap = ds_colormap;
dest = &topleft[ds_y*vid.width + ds_x1];
if (dest+8 > deststop)
return;
while (count >= 8)
{
// SoM: Why didn't I see this earlier? the spot variable is a waste now because we don't
// have the uber complicated math to calculate it now, so that was a memory write we didn't
// need!
dest[0] = colormap[source[(((UINT32)yposition >> nflatyshift) & nflatmask) | ((UINT32)xposition >> nflatxshift)]];
xposition += xstep;
yposition += ystep;
dest[1] = colormap[source[(((UINT32)yposition >> nflatyshift) & nflatmask) | ((UINT32)xposition >> nflatxshift)]];
xposition += xstep;
yposition += ystep;
dest[2] = colormap[source[(((UINT32)yposition >> nflatyshift) & nflatmask) | ((UINT32)xposition >> nflatxshift)]];
xposition += xstep;
yposition += ystep;
dest[3] = colormap[source[(((UINT32)yposition >> nflatyshift) & nflatmask) | ((UINT32)xposition >> nflatxshift)]];
xposition += xstep;
yposition += ystep;
dest[4] = colormap[source[(((UINT32)yposition >> nflatyshift) & nflatmask) | ((UINT32)xposition >> nflatxshift)]];
xposition += xstep;
yposition += ystep;
dest[5] = colormap[source[(((UINT32)yposition >> nflatyshift) & nflatmask) | ((UINT32)xposition >> nflatxshift)]];
xposition += xstep;
yposition += ystep;
dest[6] = colormap[source[(((UINT32)yposition >> nflatyshift) & nflatmask) | ((UINT32)xposition >> nflatxshift)]];
xposition += xstep;
yposition += ystep;
dest[7] = colormap[source[(((UINT32)yposition >> nflatyshift) & nflatmask) | ((UINT32)xposition >> nflatxshift)]];
xposition += xstep;
yposition += ystep;
dest += 8;
count -= 8;
}
while (count-- && dest <= deststop)
{
*dest++ = colormap[source[(((UINT32)yposition >> nflatyshift) & nflatmask) | ((UINT32)xposition >> nflatxshift)]];
xposition += xstep;
yposition += ystep;
}
}
// R_CalcTiltedLighting
// Exactly what it says on the tin. I wish I wasn't too lazy to explain things properly.
void R_CalcTiltedLighting(fixed_t start, fixed_t end)
{
// ZDoom uses a different lighting setup to us, and I couldn't figure out how to adapt their version
// of this function. Here's my own.
INT32 left = ds_x1, right = ds_x2;
fixed_t step = (end-start)/(ds_x2-ds_x1+1);
INT32 i;
// I wanna do some optimizing by checking for out-of-range segments on either side to fill in all at once,
// but I'm too bad at coding to not crash the game trying to do that. I guess this is fast enough for now...
for (i = left; i <= right; i++) {
tiltlighting[i] = (start += step) >> FRACBITS;
if (tiltlighting[i] < 0)
tiltlighting[i] = 0;
else if (tiltlighting[i] >= MAXLIGHTSCALE)
tiltlighting[i] = MAXLIGHTSCALE-1;
}
}
#define PLANELIGHTFLOAT (BASEVIDWIDTH * BASEVIDWIDTH / vid.width / (zeroheight - FIXED_TO_FLOAT(viewz)) / 21.0f * FIXED_TO_FLOAT(fovtan))
/** \brief The R_DrawTiltedSpan_8 function
Draw slopes! Holy sheit!
*/
void R_DrawTiltedSpan_8(void)
{
// x1, x2 = ds_x1, ds_x2
int width = ds_x2 - ds_x1;
double iz, uz, vz;
UINT32 u, v;
int i;
UINT8 *source;
UINT8 *colormap;
UINT8 *dest;
double startz, startu, startv;
double izstep, uzstep, vzstep;
double endz, endu, endv;
UINT32 stepu, stepv;
iz = ds_szp->z + ds_szp->y*(centery-ds_y) + ds_szp->x*(ds_x1-centerx);
// Lighting is simple. It's just linear interpolation from start to end
{
float planelightfloat = PLANELIGHTFLOAT;
float lightstart, lightend;
lightend = (iz + ds_szp->x*width) * planelightfloat;
lightstart = iz * planelightfloat;
R_CalcTiltedLighting(FLOAT_TO_FIXED(lightstart), FLOAT_TO_FIXED(lightend));
//CONS_Printf("tilted lighting %f to %f (foc %f)\n", lightstart, lightend, focallengthf);
}
uz = ds_sup->z + ds_sup->y*(centery-ds_y) + ds_sup->x*(ds_x1-centerx);
vz = ds_svp->z + ds_svp->y*(centery-ds_y) + ds_svp->x*(ds_x1-centerx);
dest = &topleft[ds_y*vid.width + ds_x1];
source = ds_source;
#if 0 // The "perfect" reference version of this routine. Pretty slow.
// Use it only to see how things are supposed to look.
i = 0;
do
{
double z = 1.f/iz;
u = (INT64)(uz*z) + viewx;
v = (INT64)(vz*z) + viewy;
colormap = planezlight[tiltlighting[ds_x1++]] + (ds_colormap - colormaps);
*dest = colormap[source[((v >> nflatyshift) & nflatmask) | (u >> nflatxshift)]];
dest++;
iz += ds_szp->x;
uz += ds_sup->x;
vz += ds_svp->x;
} while (--width >= 0);
#else
#define SPANSIZE 16
#define INVSPAN 0.0625f
startz = 1.f/iz;
startu = uz*startz;
startv = vz*startz;
izstep = ds_szp->x * SPANSIZE;
uzstep = ds_sup->x * SPANSIZE;
vzstep = ds_svp->x * SPANSIZE;
//x1 = 0;
width++;
while (width >= SPANSIZE)
{
iz += izstep;
uz += uzstep;
vz += vzstep;
endz = 1.f/iz;
endu = uz*endz;
endv = vz*endz;
stepu = (INT64)((endu - startu) * INVSPAN);
stepv = (INT64)((endv - startv) * INVSPAN);
u = (INT64)(startu) + viewx;
v = (INT64)(startv) + viewy;
for (i = SPANSIZE-1; i >= 0; i--)
{
colormap = planezlight[tiltlighting[ds_x1++]] + (ds_colormap - colormaps);
*dest = colormap[source[((v >> nflatyshift) & nflatmask) | (u >> nflatxshift)]];
dest++;
u += stepu;
v += stepv;
}
startu = endu;
startv = endv;
width -= SPANSIZE;
}
if (width > 0)
{
if (width == 1)
{
u = (INT64)(startu);
v = (INT64)(startv);
colormap = planezlight[tiltlighting[ds_x1++]] + (ds_colormap - colormaps);
*dest = colormap[source[((v >> nflatyshift) & nflatmask) | (u >> nflatxshift)]];
}
else
{
double left = width;
iz += ds_szp->x * left;
uz += ds_sup->x * left;
vz += ds_svp->x * left;
endz = 1.f/iz;
endu = uz*endz;
endv = vz*endz;
left = 1.f/left;
stepu = (INT64)((endu - startu) * left);
stepv = (INT64)((endv - startv) * left);
u = (INT64)(startu) + viewx;
v = (INT64)(startv) + viewy;
for (; width != 0; width--)
{
colormap = planezlight[tiltlighting[ds_x1++]] + (ds_colormap - colormaps);
*dest = colormap[source[((v >> nflatyshift) & nflatmask) | (u >> nflatxshift)]];
dest++;
u += stepu;
v += stepv;
}
}
}
#endif
}
/** \brief The R_DrawTiltedTranslucentSpan_8 function
Like DrawTiltedSpan, but translucent
*/
void R_DrawTiltedTranslucentSpan_8(void)
{
// x1, x2 = ds_x1, ds_x2
int width = ds_x2 - ds_x1;
double iz, uz, vz;
UINT32 u, v;
int i;
UINT8 *source;
UINT8 *colormap;
UINT8 *dest;
double startz, startu, startv;
double izstep, uzstep, vzstep;
double endz, endu, endv;
UINT32 stepu, stepv;
iz = ds_szp->z + ds_szp->y*(centery-ds_y) + ds_szp->x*(ds_x1-centerx);
// Lighting is simple. It's just linear interpolation from start to end
{
float planelightfloat = PLANELIGHTFLOAT;
float lightstart, lightend;
lightend = (iz + ds_szp->x*width) * planelightfloat;
lightstart = iz * planelightfloat;
R_CalcTiltedLighting(FLOAT_TO_FIXED(lightstart), FLOAT_TO_FIXED(lightend));
//CONS_Printf("tilted lighting %f to %f (foc %f)\n", lightstart, lightend, focallengthf);
}
uz = ds_sup->z + ds_sup->y*(centery-ds_y) + ds_sup->x*(ds_x1-centerx);
vz = ds_svp->z + ds_svp->y*(centery-ds_y) + ds_svp->x*(ds_x1-centerx);
dest = &topleft[ds_y*vid.width + ds_x1];
source = ds_source;
#if 0 // The "perfect" reference version of this routine. Pretty slow.
// Use it only to see how things are supposed to look.
i = 0;
do
{
double z = 1.f/iz;
u = (INT64)(uz*z) + viewx;
v = (INT64)(vz*z) + viewy;
colormap = planezlight[tiltlighting[ds_x1++]] + (ds_colormap - colormaps);
*dest = *(ds_transmap + (colormap[source[((v >> nflatyshift) & nflatmask) | (u >> nflatxshift)]] << 8) + *dest);
dest++;
iz += ds_szp->x;
uz += ds_sup->x;
vz += ds_svp->x;
} while (--width >= 0);
#else
#define SPANSIZE 16
#define INVSPAN 0.0625f
startz = 1.f/iz;
startu = uz*startz;
startv = vz*startz;
izstep = ds_szp->x * SPANSIZE;
uzstep = ds_sup->x * SPANSIZE;
vzstep = ds_svp->x * SPANSIZE;
//x1 = 0;
width++;
while (width >= SPANSIZE)
{
iz += izstep;
uz += uzstep;
vz += vzstep;
endz = 1.f/iz;
endu = uz*endz;
endv = vz*endz;
stepu = (INT64)((endu - startu) * INVSPAN);
stepv = (INT64)((endv - startv) * INVSPAN);
u = (INT64)(startu) + viewx;
v = (INT64)(startv) + viewy;
for (i = SPANSIZE-1; i >= 0; i--)
{
colormap = planezlight[tiltlighting[ds_x1++]] + (ds_colormap - colormaps);
*dest = *(ds_transmap + (colormap[source[((v >> nflatyshift) & nflatmask) | (u >> nflatxshift)]] << 8) + *dest);
dest++;
u += stepu;
v += stepv;
}
startu = endu;
startv = endv;
width -= SPANSIZE;
}
if (width > 0)
{
if (width == 1)
{
u = (INT64)(startu);
v = (INT64)(startv);
colormap = planezlight[tiltlighting[ds_x1++]] + (ds_colormap - colormaps);
*dest = *(ds_transmap + (colormap[source[((v >> nflatyshift) & nflatmask) | (u >> nflatxshift)]] << 8) + *dest);
}
else
{
double left = width;
iz += ds_szp->x * left;
uz += ds_sup->x * left;
vz += ds_svp->x * left;
endz = 1.f/iz;
endu = uz*endz;
endv = vz*endz;
left = 1.f/left;
stepu = (INT64)((endu - startu) * left);
stepv = (INT64)((endv - startv) * left);
u = (INT64)(startu) + viewx;
v = (INT64)(startv) + viewy;
for (; width != 0; width--)
{
colormap = planezlight[tiltlighting[ds_x1++]] + (ds_colormap - colormaps);
*dest = *(ds_transmap + (colormap[source[((v >> nflatyshift) & nflatmask) | (u >> nflatxshift)]] << 8) + *dest);
dest++;
u += stepu;
v += stepv;
}
}
}
#endif
}
#ifndef NOWATER
/** \brief The R_DrawTiltedTranslucentWaterSpan_8 function
Like DrawTiltedTranslucentSpan, but for water
*/
void R_DrawTiltedTranslucentWaterSpan_8(void)
{
// x1, x2 = ds_x1, ds_x2
int width = ds_x2 - ds_x1;
double iz, uz, vz;
UINT32 u, v;
int i;
UINT8 *source;
UINT8 *colormap;
UINT8 *dest;
UINT8 *dsrc;
double startz, startu, startv;
double izstep, uzstep, vzstep;
double endz, endu, endv;
UINT32 stepu, stepv;
iz = ds_szp->z + ds_szp->y*(centery-ds_y) + ds_szp->x*(ds_x1-centerx);
// Lighting is simple. It's just linear interpolation from start to end
{
float planelightfloat = BASEVIDWIDTH*BASEVIDWIDTH/vid.width / (zeroheight - FIXED_TO_FLOAT(viewz)) / 21.0f;
float lightstart, lightend;
lightend = (iz + ds_szp->x*width) * planelightfloat;
lightstart = iz * planelightfloat;
R_CalcTiltedLighting(FLOAT_TO_FIXED(lightstart), FLOAT_TO_FIXED(lightend));
//CONS_Printf("tilted lighting %f to %f (foc %f)\n", lightstart, lightend, focallengthf);
}
uz = ds_sup->z + ds_sup->y*(centery-ds_y) + ds_sup->x*(ds_x1-centerx);
vz = ds_svp->z + ds_svp->y*(centery-ds_y) + ds_svp->x*(ds_x1-centerx);
dest = &topleft[ds_y*vid.width + ds_x1];
dsrc = screens[1] + (ds_y+ds_bgofs)*vid.width + ds_x1;
source = ds_source;
#if 0 // The "perfect" reference version of this routine. Pretty slow.
// Use it only to see how things are supposed to look.
i = 0;
do
{
double z = 1.f/iz;
u = (INT64)(uz*z) + viewx;
v = (INT64)(vz*z) + viewy;
colormap = planezlight[tiltlighting[ds_x1++]] + (ds_colormap - colormaps);
*dest = *(ds_transmap + (colormap[source[((v >> nflatyshift) & nflatmask) | (u >> nflatxshift)]] << 8) + *dsrc++);
dest++;
iz += ds_szp->x;
uz += ds_sup->x;
vz += ds_svp->x;
} while (--width >= 0);
#else
#define SPANSIZE 16
#define INVSPAN 0.0625f
startz = 1.f/iz;
startu = uz*startz;
startv = vz*startz;
izstep = ds_szp->x * SPANSIZE;
uzstep = ds_sup->x * SPANSIZE;
vzstep = ds_svp->x * SPANSIZE;
//x1 = 0;
width++;
while (width >= SPANSIZE)
{
iz += izstep;
uz += uzstep;
vz += vzstep;
endz = 1.f/iz;
endu = uz*endz;
endv = vz*endz;
stepu = (INT64)((endu - startu) * INVSPAN);
stepv = (INT64)((endv - startv) * INVSPAN);
u = (INT64)(startu) + viewx;
v = (INT64)(startv) + viewy;
for (i = SPANSIZE-1; i >= 0; i--)
{
colormap = planezlight[tiltlighting[ds_x1++]] + (ds_colormap - colormaps);
*dest = *(ds_transmap + (colormap[source[((v >> nflatyshift) & nflatmask) | (u >> nflatxshift)]] << 8) + *dsrc++);
dest++;
u += stepu;
v += stepv;
}
startu = endu;
startv = endv;
width -= SPANSIZE;
}
if (width > 0)
{
if (width == 1)
{
u = (INT64)(startu);
v = (INT64)(startv);
colormap = planezlight[tiltlighting[ds_x1++]] + (ds_colormap - colormaps);
*dest = *(ds_transmap + (colormap[source[((v >> nflatyshift) & nflatmask) | (u >> nflatxshift)]] << 8) + *dsrc++);
}
else
{
double left = width;
iz += ds_szp->x * left;
uz += ds_sup->x * left;
vz += ds_svp->x * left;
endz = 1.f/iz;
endu = uz*endz;
endv = vz*endz;
left = 1.f/left;
stepu = (INT64)((endu - startu) * left);
stepv = (INT64)((endv - startv) * left);
u = (INT64)(startu) + viewx;
v = (INT64)(startv) + viewy;
for (; width != 0; width--)
{
colormap = planezlight[tiltlighting[ds_x1++]] + (ds_colormap - colormaps);
*dest = *(ds_transmap + (colormap[source[((v >> nflatyshift) & nflatmask) | (u >> nflatxshift)]] << 8) + *dsrc++);
dest++;
u += stepu;
v += stepv;
}
}
}
#endif
}
#endif // NOWATER
void R_DrawTiltedSplat_8(void)
{
// x1, x2 = ds_x1, ds_x2
int width = ds_x2 - ds_x1;
double iz, uz, vz;
UINT32 u, v;
int i;
UINT8 *source;
UINT8 *colormap;
UINT8 *dest;
UINT8 val;
double startz, startu, startv;
double izstep, uzstep, vzstep;
double endz, endu, endv;
UINT32 stepu, stepv;
iz = ds_szp->z + ds_szp->y*(centery-ds_y) + ds_szp->x*(ds_x1-centerx);
// Lighting is simple. It's just linear interpolation from start to end
{
float planelightfloat = PLANELIGHTFLOAT;
float lightstart, lightend;
lightend = (iz + ds_szp->x*width) * planelightfloat;
lightstart = iz * planelightfloat;
R_CalcTiltedLighting(FLOAT_TO_FIXED(lightstart), FLOAT_TO_FIXED(lightend));
//CONS_Printf("tilted lighting %f to %f (foc %f)\n", lightstart, lightend, focallengthf);
}
uz = ds_sup->z + ds_sup->y*(centery-ds_y) + ds_sup->x*(ds_x1-centerx);
vz = ds_svp->z + ds_svp->y*(centery-ds_y) + ds_svp->x*(ds_x1-centerx);
dest = &topleft[ds_y*vid.width + ds_x1];
source = ds_source;
#if 0 // The "perfect" reference version of this routine. Pretty slow.
// Use it only to see how things are supposed to look.
i = 0;
do
{
double z = 1.f/iz;
u = (INT64)(uz*z) + viewx;
v = (INT64)(vz*z) + viewy;
colormap = planezlight[tiltlighting[ds_x1++]] + (ds_colormap - colormaps);
val = source[((v >> nflatyshift) & nflatmask) | (u >> nflatxshift)];
if (val != TRANSPARENTPIXEL)
*dest = colormap[val];
dest++;
iz += ds_szp->x;
uz += ds_sup->x;
vz += ds_svp->x;
} while (--width >= 0);
#else
#define SPANSIZE 16
#define INVSPAN 0.0625f
startz = 1.f/iz;
startu = uz*startz;
startv = vz*startz;
izstep = ds_szp->x * SPANSIZE;
uzstep = ds_sup->x * SPANSIZE;
vzstep = ds_svp->x * SPANSIZE;
//x1 = 0;
width++;
while (width >= SPANSIZE)
{
iz += izstep;
uz += uzstep;
vz += vzstep;
endz = 1.f/iz;
endu = uz*endz;
endv = vz*endz;
stepu = (INT64)((endu - startu) * INVSPAN);
stepv = (INT64)((endv - startv) * INVSPAN);
u = (INT64)(startu) + viewx;
v = (INT64)(startv) + viewy;
for (i = SPANSIZE-1; i >= 0; i--)
{
colormap = planezlight[tiltlighting[ds_x1++]] + (ds_colormap - colormaps);
val = source[((v >> nflatyshift) & nflatmask) | (u >> nflatxshift)];
if (val != TRANSPARENTPIXEL)
*dest = colormap[val];
dest++;
u += stepu;
v += stepv;
}
startu = endu;
startv = endv;
width -= SPANSIZE;
}
if (width > 0)
{
if (width == 1)
{
u = (INT64)(startu);
v = (INT64)(startv);
colormap = planezlight[tiltlighting[ds_x1++]] + (ds_colormap - colormaps);
val = source[((v >> nflatyshift) & nflatmask) | (u >> nflatxshift)];
if (val != TRANSPARENTPIXEL)
*dest = colormap[val];
}
else
{
double left = width;
iz += ds_szp->x * left;
uz += ds_sup->x * left;
vz += ds_svp->x * left;
endz = 1.f/iz;
endu = uz*endz;
endv = vz*endz;
left = 1.f/left;
stepu = (INT64)((endu - startu) * left);
stepv = (INT64)((endv - startv) * left);
u = (INT64)(startu) + viewx;
v = (INT64)(startv) + viewy;
for (; width != 0; width--)
{
colormap = planezlight[tiltlighting[ds_x1++]] + (ds_colormap - colormaps);
val = source[((v >> nflatyshift) & nflatmask) | (u >> nflatxshift)];
if (val != TRANSPARENTPIXEL)
*dest = colormap[val];
dest++;
u += stepu;
v += stepv;
}
}
}
#endif
}
/** \brief The R_DrawSplat_8 function
Just like R_DrawSpan_8, but skips transparent pixels.
*/
void R_DrawSplat_8 (void)
{
UINT32 xposition;
UINT32 yposition;
UINT32 xstep, ystep;
UINT8 *source;
UINT8 *colormap;
UINT8 *dest;
size_t count;
UINT32 val;
// SoM: we only need 6 bits for the integer part (0 thru 63) so the rest
// can be used for the fraction part. This allows calculation of the memory address in the
// texture with two shifts, an OR and one AND. (see below)
// for texture sizes > 64 the amount of precision we can allow will decrease, but only by one
// bit per power of two (obviously)
// Ok, because I was able to eliminate the variable spot below, this function is now FASTER
// than the original span renderer. Whodathunkit?
xposition = ds_xfrac << nflatshiftup; yposition = ds_yfrac << nflatshiftup;
xstep = ds_xstep << nflatshiftup; ystep = ds_ystep << nflatshiftup;
source = ds_source;
colormap = ds_colormap;
dest = &topleft[ds_y*vid.width + ds_x1];
count = ds_x2 - ds_x1 + 1;
while (count >= 8)
{
// SoM: Why didn't I see this earlier? the spot variable is a waste now because we don't
// have the uber complicated math to calculate it now, so that was a memory write we didn't
// need!
//
// <Callum> 4194303 = (2048x2048)-1 (2048x2048 is maximum flat size)
val = ((yposition >> nflatyshift) & nflatmask) | (xposition >> nflatxshift);
val &= 4194303;
val = source[val];
if (val != TRANSPARENTPIXEL)
dest[0] = colormap[val];
xposition += xstep;
yposition += ystep;
val = ((yposition >> nflatyshift) & nflatmask) | (xposition >> nflatxshift);
val &= 4194303;
val = source[val];
if (val != TRANSPARENTPIXEL)
dest[1] = colormap[val];
xposition += xstep;
yposition += ystep;
val = ((yposition >> nflatyshift) & nflatmask) | (xposition >> nflatxshift);
val &= 4194303;
val = source[val];
if (val != TRANSPARENTPIXEL)
dest[2] = colormap[val];
xposition += xstep;
yposition += ystep;
val = ((yposition >> nflatyshift) & nflatmask) | (xposition >> nflatxshift);
val &= 4194303;
val = source[val];
if (val != TRANSPARENTPIXEL)
dest[3] = colormap[val];
xposition += xstep;
yposition += ystep;
val = ((yposition >> nflatyshift) & nflatmask) | (xposition >> nflatxshift);
val &= 4194303;
val = source[val];
if (val != TRANSPARENTPIXEL)
dest[4] = colormap[val];
xposition += xstep;
yposition += ystep;
val = ((yposition >> nflatyshift) & nflatmask) | (xposition >> nflatxshift);
val &= 4194303;
val = source[val];
if (val != TRANSPARENTPIXEL)
dest[5] = colormap[val];
xposition += xstep;
yposition += ystep;
val = ((yposition >> nflatyshift) & nflatmask) | (xposition >> nflatxshift);
val &= 4194303;
val = source[val];
if (val != TRANSPARENTPIXEL)
dest[6] = colormap[val];
xposition += xstep;
yposition += ystep;
val = ((yposition >> nflatyshift) & nflatmask) | (xposition >> nflatxshift);
val &= 4194303;
val = source[val];
if (val != TRANSPARENTPIXEL)
dest[7] = colormap[val];
xposition += xstep;
yposition += ystep;
dest += 8;
count -= 8;
}
while (count--)
{
val = ((yposition >> nflatyshift) & nflatmask) | (xposition >> nflatxshift);
val &= 4194303;
val = source[val];
if (val != TRANSPARENTPIXEL)
*dest = colormap[val];
dest++;
xposition += xstep;
yposition += ystep;
}
}
/** \brief The R_DrawTranslucentSplat_8 function
Just like R_DrawSplat_8, but is translucent!
*/
void R_DrawTranslucentSplat_8 (void)
{
UINT32 xposition;
UINT32 yposition;
UINT32 xstep, ystep;
UINT8 *source;
UINT8 *colormap;
UINT8 *dest;
size_t count;
UINT8 val;
// SoM: we only need 6 bits for the integer part (0 thru 63) so the rest
// can be used for the fraction part. This allows calculation of the memory address in the
// texture with two shifts, an OR and one AND. (see below)
// for texture sizes > 64 the amount of precision we can allow will decrease, but only by one
// bit per power of two (obviously)
// Ok, because I was able to eliminate the variable spot below, this function is now FASTER
// than the original span renderer. Whodathunkit?
xposition = ds_xfrac << nflatshiftup; yposition = ds_yfrac << nflatshiftup;
xstep = ds_xstep << nflatshiftup; ystep = ds_ystep << nflatshiftup;
source = ds_source;
colormap = ds_colormap;
dest = &topleft[ds_y*vid.width + ds_x1];
count = ds_x2 - ds_x1 + 1;
while (count >= 8)
{
// SoM: Why didn't I see this earlier? the spot variable is a waste now because we don't
// have the uber complicated math to calculate it now, so that was a memory write we didn't
// need!
val = source[((yposition >> nflatyshift) & nflatmask) | (xposition >> nflatxshift)];
if (val != TRANSPARENTPIXEL)
dest[0] = *(ds_transmap + (colormap[val] << 8) + dest[0]);
xposition += xstep;
yposition += ystep;
val = source[((yposition >> nflatyshift) & nflatmask) | (xposition >> nflatxshift)];
if (val != TRANSPARENTPIXEL)
dest[1] = *(ds_transmap + (colormap[val] << 8) + dest[1]);
xposition += xstep;
yposition += ystep;
val = source[((yposition >> nflatyshift) & nflatmask) | (xposition >> nflatxshift)];
if (val != TRANSPARENTPIXEL)
dest[2] = *(ds_transmap + (colormap[val] << 8) + dest[2]);
xposition += xstep;
yposition += ystep;
val = source[((yposition >> nflatyshift) & nflatmask) | (xposition >> nflatxshift)];
if (val != TRANSPARENTPIXEL)
dest[3] = *(ds_transmap + (colormap[val] << 8) + dest[3]);
xposition += xstep;
yposition += ystep;
val = source[((yposition >> nflatyshift) & nflatmask) | (xposition >> nflatxshift)];
if (val != TRANSPARENTPIXEL)
dest[4] = *(ds_transmap + (colormap[val] << 8) + dest[4]);
xposition += xstep;
yposition += ystep;
val = source[((yposition >> nflatyshift) & nflatmask) | (xposition >> nflatxshift)];
if (val != TRANSPARENTPIXEL)
dest[5] = *(ds_transmap + (colormap[val] << 8) + dest[5]);
xposition += xstep;
yposition += ystep;
val = source[((yposition >> nflatyshift) & nflatmask) | (xposition >> nflatxshift)];
if (val != TRANSPARENTPIXEL)
dest[6] = *(ds_transmap + (colormap[val] << 8) + dest[6]);
xposition += xstep;
yposition += ystep;
val = source[((yposition >> nflatyshift) & nflatmask) | (xposition >> nflatxshift)];
if (val != TRANSPARENTPIXEL)
dest[7] = *(ds_transmap + (colormap[val] << 8) + dest[7]);
xposition += xstep;
yposition += ystep;
dest += 8;
count -= 8;
}
while (count--)
{
val = source[((yposition >> nflatyshift) & nflatmask) | (xposition >> nflatxshift)];
if (val != TRANSPARENTPIXEL)
*dest = *(ds_transmap + (colormap[val] << 8) + *dest);
dest++;
xposition += xstep;
yposition += ystep;
}
}
/** \brief The R_DrawTranslucentSpan_8 function
Draws the actual span with translucent.
*/
void R_DrawTranslucentSpan_8 (void)
{
fixed_t xposition;
fixed_t yposition;
fixed_t xstep, ystep;
UINT8 *source;
UINT8 *colormap;
UINT8 *dest;
const UINT8 *deststop = screens[0] + vid.rowbytes * vid.height;
size_t count = (ds_x2 - ds_x1 + 1);
UINT32 val;
xposition = ds_xfrac; yposition = ds_yfrac;
xstep = ds_xstep; ystep = ds_ystep;
// SoM: we only need 6 bits for the integer part (0 thru 63) so the rest
// can be used for the fraction part. This allows calculation of the memory address in the
// texture with two shifts, an OR and one AND. (see below)
// for texture sizes > 64 the amount of precision we can allow will decrease, but only by one
// bit per power of two (obviously)
// Ok, because I was able to eliminate the variable spot below, this function is now FASTER
// than the original span renderer. Whodathunkit?
xposition <<= nflatshiftup; yposition <<= nflatshiftup;
xstep <<= nflatshiftup; ystep <<= nflatshiftup;
source = ds_source;
colormap = ds_colormap;
dest = &topleft[ds_y*vid.width + ds_x1];
while (count >= 8)
{
// SoM: Why didn't I see this earlier? the spot variable is a waste now because we don't
// have the uber complicated math to calculate it now, so that was a memory write we didn't
// need!
dest[0] = *(ds_transmap + (colormap[source[(((UINT32)yposition >> nflatyshift) & nflatmask) | ((UINT32)xposition >> nflatxshift)]] << 8) + dest[0]);
xposition += xstep;
yposition += ystep;
dest[1] = *(ds_transmap + (colormap[source[(((UINT32)yposition >> nflatyshift) & nflatmask) | ((UINT32)xposition >> nflatxshift)]] << 8) + dest[1]);
xposition += xstep;
yposition += ystep;
dest[2] = *(ds_transmap + (colormap[source[(((UINT32)yposition >> nflatyshift) & nflatmask) | ((UINT32)xposition >> nflatxshift)]] << 8) + dest[2]);
xposition += xstep;
yposition += ystep;
dest[3] = *(ds_transmap + (colormap[source[(((UINT32)yposition >> nflatyshift) & nflatmask) | ((UINT32)xposition >> nflatxshift)]] << 8) + dest[3]);
xposition += xstep;
yposition += ystep;
dest[4] = *(ds_transmap + (colormap[source[(((UINT32)yposition >> nflatyshift) & nflatmask) | ((UINT32)xposition >> nflatxshift)]] << 8) + dest[4]);
xposition += xstep;
yposition += ystep;
dest[5] = *(ds_transmap + (colormap[source[(((UINT32)yposition >> nflatyshift) & nflatmask) | ((UINT32)xposition >> nflatxshift)]] << 8) + dest[5]);
xposition += xstep;
yposition += ystep;
dest[6] = *(ds_transmap + (colormap[source[(((UINT32)yposition >> nflatyshift) & nflatmask) | ((UINT32)xposition >> nflatxshift)]] << 8) + dest[6]);
xposition += xstep;
yposition += ystep;
dest[7] = *(ds_transmap + (colormap[source[(((UINT32)yposition >> nflatyshift) & nflatmask) | ((UINT32)xposition >> nflatxshift)]] << 8) + dest[7]);
xposition += xstep;
yposition += ystep;
dest += 8;
count -= 8;
}
while (count-- && dest <= deststop)
{
val = (((UINT32)yposition >> nflatyshift) & nflatmask) | ((UINT32)xposition >> nflatxshift);
*dest = *(ds_transmap + (colormap[source[val]] << 8) + *dest);
dest++;
xposition += xstep;
yposition += ystep;
}
}
#ifndef NOWATER
void R_DrawTranslucentWaterSpan_8(void)
{
UINT32 xposition;
UINT32 yposition;
UINT32 xstep, ystep;
UINT8 *source;
UINT8 *colormap;
UINT8 *dest;
UINT8 *dsrc;
size_t count;
// SoM: we only need 6 bits for the integer part (0 thru 63) so the rest
// can be used for the fraction part. This allows calculation of the memory address in the
// texture with two shifts, an OR and one AND. (see below)
// for texture sizes > 64 the amount of precision we can allow will decrease, but only by one
// bit per power of two (obviously)
// Ok, because I was able to eliminate the variable spot below, this function is now FASTER
// than the original span renderer. Whodathunkit?
xposition = ds_xfrac << nflatshiftup; yposition = (ds_yfrac + ds_waterofs) << nflatshiftup;
xstep = ds_xstep << nflatshiftup; ystep = ds_ystep << nflatshiftup;
source = ds_source;
colormap = ds_colormap;
dest = &topleft[ds_y*vid.width + ds_x1];
dsrc = screens[1] + (ds_y+ds_bgofs)*vid.width + ds_x1;
count = ds_x2 - ds_x1 + 1;
while (count >= 8)
{
// SoM: Why didn't I see this earlier? the spot variable is a waste now because we don't
// have the uber complicated math to calculate it now, so that was a memory write we didn't
// need!
dest[0] = colormap[*(ds_transmap + (source[((yposition >> nflatyshift) & nflatmask) | (xposition >> nflatxshift)] << 8) + *dsrc++)];
xposition += xstep;
yposition += ystep;
dest[1] = colormap[*(ds_transmap + (source[((yposition >> nflatyshift) & nflatmask) | (xposition >> nflatxshift)] << 8) + *dsrc++)];
xposition += xstep;
yposition += ystep;
dest[2] = colormap[*(ds_transmap + (source[((yposition >> nflatyshift) & nflatmask) | (xposition >> nflatxshift)] << 8) + *dsrc++)];
xposition += xstep;
yposition += ystep;
dest[3] = colormap[*(ds_transmap + (source[((yposition >> nflatyshift) & nflatmask) | (xposition >> nflatxshift)] << 8) + *dsrc++)];
xposition += xstep;
yposition += ystep;
dest[4] = colormap[*(ds_transmap + (source[((yposition >> nflatyshift) & nflatmask) | (xposition >> nflatxshift)] << 8) + *dsrc++)];
xposition += xstep;
yposition += ystep;
dest[5] = colormap[*(ds_transmap + (source[((yposition >> nflatyshift) & nflatmask) | (xposition >> nflatxshift)] << 8) + *dsrc++)];
xposition += xstep;
yposition += ystep;
dest[6] = colormap[*(ds_transmap + (source[((yposition >> nflatyshift) & nflatmask) | (xposition >> nflatxshift)] << 8) + *dsrc++)];
xposition += xstep;
yposition += ystep;
dest[7] = colormap[*(ds_transmap + (source[((yposition >> nflatyshift) & nflatmask) | (xposition >> nflatxshift)] << 8) + *dsrc++)];
xposition += xstep;
yposition += ystep;
dest += 8;
count -= 8;
}
while (count--)
{
*dest++ = colormap[*(ds_transmap + (source[((yposition >> nflatyshift) & nflatmask) | (xposition >> nflatxshift)] << 8) + *dsrc++)];
xposition += xstep;
yposition += ystep;
}
}
#endif
/** \brief The R_DrawFogSpan_8 function
Draws the actual span with fogging.
*/
void R_DrawFogSpan_8(void)
{
UINT8 *colormap;
UINT8 *dest;
size_t count;
colormap = ds_colormap;
dest = &topleft[ds_y *vid.width + ds_x1];
count = ds_x2 - ds_x1 + 1;
while (count >= 4)
{
dest[0] = colormap[dest[0]];
dest[1] = colormap[dest[1]];
dest[2] = colormap[dest[2]];
dest[3] = colormap[dest[3]];
dest += 4;
count -= 4;
}
while (count--)
{
*dest = colormap[*dest];
dest++;
}
}
/** \brief The R_DrawFogColumn_8 function
Fog wall.
*/
void R_DrawFogColumn_8(void)
{
INT32 count;
UINT8 *dest;
count = dc_yh - dc_yl;
// Zero length, column does not exceed a pixel.
if (count < 0)
return;
#ifdef RANGECHECK
if ((unsigned)dc_x >= (unsigned)vid.width || dc_yl < 0 || dc_yh >= vid.height)
I_Error("R_DrawFogColumn_8: %d to %d at %d", dc_yl, dc_yh, dc_x);
#endif
// Framebuffer destination address.
dest = &topleft[dc_yl*vid.width + dc_x];
// Determine scaling, which is the only mapping to be done.
do
{
// Simple. Apply the colormap to what's already on the screen.
*dest = dc_colormap[*dest];
dest += vid.width;
} while (count--);
}
/** \brief The R_DrawShadeColumn_8 function
This is for 3D floors that cast shadows on walls.
This function just cuts the column up into sections and calls R_DrawColumn_8
*/
void R_DrawColumnShadowed_8(void)
{
INT32 count, realyh, i, height, bheight = 0, solid = 0;
realyh = dc_yh;
count = dc_yh - dc_yl;
// Zero length, column does not exceed a pixel.
if (count < 0)
return;
#ifdef RANGECHECK
if ((unsigned)dc_x >= (unsigned)vid.width || dc_yl < 0 || dc_yh >= vid.height)
I_Error("R_DrawColumnShadowed_8: %d to %d at %d", dc_yl, dc_yh, dc_x);
#endif
// This runs through the lightlist from top to bottom and cuts up the column accordingly.
for (i = 0; i < dc_numlights; i++)
{
// If the height of the light is above the column, get the colormap
// anyway because the lighting of the top should be affected.
solid = dc_lightlist[i].flags & FF_CUTSOLIDS;
height = dc_lightlist[i].height >> LIGHTSCALESHIFT;
if (solid)
{
bheight = dc_lightlist[i].botheight >> LIGHTSCALESHIFT;
if (bheight < height)
{
// confounded slopes sometimes allow partial invertedness,
// even including cases where the top and bottom heights
// should actually be the same!
// swap the height values as a workaround for this quirk
INT32 temp = height;
height = bheight;
bheight = temp;
}
}
if (height <= dc_yl)
{
dc_colormap = dc_lightlist[i].rcolormap;
if (encoremap)
dc_colormap += (256*32);
if (solid && dc_yl < bheight)
dc_yl = bheight;
continue;
}
// Found a break in the column!
dc_yh = height;
if (dc_yh > realyh)
dc_yh = realyh;
basecolfunc(); // R_DrawColumn_8 for the appropriate architecture
if (solid)
dc_yl = bheight;
else
dc_yl = dc_yh + 1;
dc_colormap = dc_lightlist[i].rcolormap;
if (encoremap)
dc_colormap += (256*32);
}
dc_yh = realyh;
if (dc_yl <= realyh)
walldrawerfunc(); // R_DrawWallColumn_8 for the appropriate architecture
}