Horizontal_Gray_Sweep_Drop): Test for intersections which
degenerate to a single point can be ignored; this has been confirmed
by Greg Hitchcock from Microsoft. (This was commented out code.)
* src/raster/ftraster.c (Render_Glyph, Render_Gray_Glyph,
Draw_Sweep): No-dropout mode is value 2, not value 0.
(Draw_Sweep): Really skip dropout handling for no-dropout mode.
Pass dropout rules from the TT bytecode interpreter to the
rasterizer; temporarily this is enabled only if
`USE_SCAN_CONVERSION_RULES' is defined.
* include/freetype/ftimage.h (FT_OUTLINE_SMART_DROPOUTS,
FT_OUTLINE_EXCLUDE_STUBS): New flags for for FT_Outline.
* src/raster/ftraster.c (Vertical_Sweep_Drop, Horizontal_Sweep_Drop,
Horizontal_Gray_Sweep_Drop): Use same mode numbers as given in the
OpenType specification.
Fix mode 4 computation.
(Render_Glyph, Render_Gray_Glyph): Handle new outline flags.
* src/truetype/ttgload.c (TT_Load_Glyph)
[USE_SCAN_CONVERSION_RULES]: Convert scan conversion mode to
FT_OUTLINE_XXX flags.
* src/truetype/ttinterp.c (Ins_SCANCTRL): Enable ppem check.
src/base/ftmac.c, src/base/ftrfork.c, src/lzw/ftzopen.c,
src/raster/ftrend1.c, src/sfnt/ttpost.c, src/truetype/ttgxvar.c,
src/type42/t42parse.c, src/winfonts/winfnt.c: hardening the code
against out-of-bounds conditions when allocating arrays. This is
for the cases where FT_NEW_ARRAY and FT_RENEW_ARRAY are not used
already. Introducing the new FT_ALLOC_MULT and FT_REALLOC_MULT
macros.
sufficient to modify a single file, `modules.cfg', to control the
inclusion of modules and base extension files.
This change also fixes the creation of ftmodule.h; it now depends on
`modules.cfg' and thus is rebuilt only if necessary.
Finally, a version of `ftoption.h' in OBJ_DIR is preferred over the
default location.
* modules.cfg: New file.
* builds/freetype.mk: Don't include `modules.mk'.
Include all `rules.mk' files as specified in `modules.cfg'.
(FTOPTION_FLAG, FTOPTION_H): New variables.
(FT_CFLAGS): Add macro definition for FT_CONFIG_MODULES_H.
Add FTOPTION_FLAG.
($(FT_INIT_OBJ)): Don't use FT_MODULE_LIST.
(CONFIG_H): Add FTMODULE_H and FTOPTION_H.
(INCLUDES): Add DEVEL_DIR.
(INCLUDE_FLAGS, FTSYS_SRC, FTSYS_OBJ, FTDEBUG_SRC, FTDEBUG_OBJ,
OBJ_M, OBJ_S): Use `:=', not `='.
(remove_ftmodule_h): New phony target to delete `ftmodule.h'.
(distclean): Add remove_ftmodule_h.
* builds/modules.mk: (MODULE_LIST): Removed.
(make_module_list, clean_module_list): Replace targets
with...
(FTMODULE_H_INIT, FTMODULE_H_CREATE, FTMODULE_H_DONE): New
variables. Reason for the change is that it is not possible to have
a phony prerequisite which is run only if the target file must be
rebuilt (phony prerequisites act like subroutines and are *always*
executed). We only want to rebuild `ftmodule.h' if `module.cfg' is
changed.
Update all callers.
($FTMODULE_H)): Rule to create `ftmodule.h', depending on
`modules.cfg'.
* builds/toplevel.mk: Rewrite and simplify module handling.
(MODULES_CFG, FTMODULE_H): New variables.
Include MODULES_CFG.
(MODULES): New variable to include all `module.mk' and `rules.mk'
files. We no longer use make's `wildcard' function for this.
* Makefile (USE_MODULES): Remove. Update all users.
(OBJ_DIR): Define it here.
* src/*/module.mk: Change
make_module_list: foo
foo: ...
to
FTMODULE_H_COMMANDS += FOO
define FOO
...
endef
in all files. `FTMODULE_H_COMMANDS' is used in `FTMODULE_H_CREATE'.
* src/base/rules.mk (BASE_EXT_SRC): Use BASE_EXTENSIONS.
* builds/unix/detect.mk (setup): Always execute `configure' script.
(have_mk): Rename to...
(have_Makefile): This.
Don't use `strip' function.
* builds/unix/unix.mk: Include `install.mk' only if BUILD_PROJECT is
defined.
(have_mk): Don't use `strip' function.
Test for unix-def.mk in OBJ_DIR, not BUILD_DIR (and invert the test
accordingly).
* builds/unix/install.mk (install, uninstall): Handle `ftmodule.h'.
* builds/os2/os2-dev.mk, builds/unix/unix-dev.mk,
builds/win32/w32-bccd.mk, builds/win32/w32-dev.mk: Don't define
BUILD_DIR but DEVEL_DIR for development header files.
* builds/ansi/ansi-def.mk (TOP_DIR, OBJ_DIR),
builds/beos/beos-def.mk (TOP_DIR, OBJ_DIR), builds/unix/unix-def.in
(TOP_DIR, OBJ_DIR): Removed. Defined elsewhere.
* builds/dos/dos-def.mk (OBJ_DIR), builds/os2/os2-def.mk (OBJ_DIR),
builds/win32/win32-def.mk (OBJ_DIR): Removed. Defined elsewhere.
* builds/unix/unixddef.mk: Don't define BUILD_DIR but DEVEL_DIR for
development header files.
Don't define PLATFORM.
* configure: Copy `modules.cfg' to builddir if builddir != srcdir.
Update snippet taken from autoconf's m4sh.m4 to current CVS version.
Be more verbose.
* include/freetype/config/ftmodule.h: Add comments -- this file is
no longer used if FreeType is built with GNU make.
* docs/CHANGES, docs/CUSTOMIZE, docs/INSTALL, docs/INSTALL.ANY,
docs/INSTALL.GNU, docs/INSTALL.UNX: Document new build mechanism.
Other minor updates.
* modules.txt: Removed. Contents included in `modules.cfg'.
* include/freetype/internal/ftmemory.h (FT_QAlloc_Debug,
FT_Free_Debug) [FT_STRICT_ALIASING]: Fix typos.
* src/base/ftdbgmem.c (FT_Alloc_Debug, FT_Realloc_Debug,
FT_QAlloc_Debug, FT_QRealloc_Debug, FT_Free_Debug)
[FT_STRICT_ALIASING]: Implement.
compiled as stand-alone.
* src/raster/ftraster.c: Add comment how to compile as stand-alone.
s/FT_CONFIG_OPTION_STATIC_RASTER/FT_STATIC_RASTER/.
s/TT_STATIC_RASTER/FT_STATIC_RASTER/.
[_STANDALONE_]: Include ftimage.h and ftmisc.h.
(FT_TRACE1, FT_TRACE6, ft_memset, FT_MEM_ZERO): Define
conditionally.
(Render_Glyph, Render_Gray_Glyph): Return Raster_Err_None (or
Raster_Err_Unsupported).
(ft_black_new) [_STANDALONE_]: Fix type of `the_raster'.
(ft_black_init, ft_black_reset, ft_black_set_mode, ft_black_render):
Use `ras', not `raster'.
(ft_black_done): Use FT_UNUSED_RASTER.
(Horizontal_Sweep_Init, Horizontal_Sweep_Step,
Horizontal_Gray_Sweep_Span): Use FT_UNUSED_RASTER.
* docs/CHANGES: Updated.
Exclude debug info for `Release' versions to reduce library size.
* src/base/ftobjs.c (FT_Open_Face): Make it work as documented, this
is, ignore `aface' completely if face_index < 0. Reported by David
Osborn <spam@habitualhiatus.com>.
* include/freetype/ftimage.h (FT_Outline_MoveToFunc,
FT_Outline_LineTo_Func, FT_Outline_ConicToFunc,
FT_Outline_CubicToFunc), src/smooth/ftgrays.c (gray_render_conic,
gray_render_cubic, gray_move_to, gray_line_to, gray_conic_to,
gray_cubic_to, gray_render_span, gray_sweep): Decorate parameters
with `const' where appropriate.
src/autofit/afloader.c, src/autohint/ahhint.c:
moved the definition of 'lsb_delta' and 'rsb_delta' from FT_GlyphMetrics
to FT_GlyphSlotRec. The old location did BREAK BINARY COMPATIBILITY
of the library !!
* src/sfnt/sfobjs.c: removing compiler warning
#defines for the constants.
(FT_Open_Args): Change type of `flags' to FT_UInt.
(FT_GlyphSlot): Move `flags' to FT_Slot_Internal.
* include/freetype/ftimage.h (FT_Outline_Flags, FT_Raster_Flag):
Replaced with #defines for the constants.
* include/freetype/internal/ftobjs.h (FT_Slot_Internal): New
field `flags' (from FT_GlyphSlot).
Updated all affected source files.
(FT_GLYPH_OWN_BITMAP): New macro (from ftgloadr.h).
* include/freetype/internal/ftgloadr.h (FT_GLYPH_OWN_BITMAP): Moved
to ftobjs.h.
* src/base/ftglyph.c (FT_Glyph_To_Bitmap): Use dummy
FT_GlyphSlot_Internal object.
ft_glyph_bbox_subpixels, ft_glyph_bbox_gridfit,
ft_glyph_bbox_truncate, ft_glyph_bbox_pixels): Replaced with
FT_GLYPH_BBOX_UNSCALED, FT_GLYPH_BBOX_SUBPIXELS,
FT_GLYPH_BBIX_GRIDFIT, FT_GLYPH_BBOX_TRUNCATE, FT_GLYPH_BBOX_PIXELS.
The lowercase variants are now (deprecated aliases) to the uppercase
versions.
Updated all other files.
* include/freetype/ftmodule.h (ft_module_font_driver,
ft_module_renderer, ft_module_hinter, ft_module_styler,
ft_module_driver_scalable, ft_module_driver_no_outlines,
ft_module_driver_has_hinter): Replaced with FT_MODULE_FONT_DRIVER,
FT_MODULE_RENDERER, FT_MODULE_HINTER, FT_MODULE_STYLER,
FT_MODULE_DRIVER_SCALABLE, FT_MODULE_DRIVER_NO_OUTLINES,
FT_MODULE_DRIVER_HAS_HINTER.
The lowercase variants are now (deprecated aliases) to the uppercase
versions.
Updated all other files.
* src/base/ftglyph.c (FT_Glyph_Get_CBox): Handle bbox_mode better
as enumeration.
* src/pcf/pcfdrivr.c (pcf_driver_class), src/winfonts/winfnt.c
(winfnt_driver_class), src/bdf/bdfdrivr.c (bdf_driver_class): Add
the FT_MODULE_DRIVER_NO_OUTLINES flag.
. In all makefiles `/' is used as the path separator. The
conversion to the real path separators is done as late as
possible using $(subst ...).
. $(HOSTSEP) no longer exists. Now, $(SEP) gives the path separator
for the operating system, and the new $(COMPILER_SEP) the path
separator for the compiler tools.
. $(BUILD) has been renamed to $(BUILD_DIR). In general, all
directory variables end with `_DIR'. The variants ending in `_'
(like `BASE_' have been removed).
The following ChangeLog entries only describe changes which are
not related to the redesign.
* builds/beos/beos-def.mk (BUILD_DIR): Fix typo.
* builds/compiler/watcom.mk (LINK_LIBRARY): Fix linker call to avoid
overlong arguments as suggested by J. Ali Harlow
<ali@avrc.city.ac.uk>.
* builds/dos/dos-wat.mk: New file.
* builds/freetype.mk (FREETYPE_H): Include header files from the
`devel' subdirectory.
* builds/os2/os2-dev.mk, builds/unix/unixddef.mk,
builds/unix/unixddef.mk, builds/win32/w32-bccd.mk,
builds/win32/w32-dev.mk (BUILD_DIR): Fix path.
* builds/unix/configure.ac, builds/unic/configure: Updated.
* builds/unix/unix-def.in (DISTCLEAN): Add `freetype2.pc'.
* devel/ftoption.h: Updated.
include/freetype/internal/ftobjs.h,
include/freetype/internal/psaux.h, src/cid/cidgload.c,
src/psaux/psobjs.c, src/psaux/t1decode.c, src/psaux/psobjs.h,
src/pshinter/pshrec.c, src/pshinter/pshalgo.c,
src/psnames/psmodule.c, src/raster/ftraster.c, src/sfnt/sfobjs.c,
src/smooth/ftgrays.c, src/smooth/ftsmooth.c, src/truetype/ttobjs.c,
src/truetype/ttdriver.c, src/truetype/ttgload.c, src/type1/t1afm.c,
src/type1/t1gload.c, src/type1/t1gload.h, src/type1/t1load.c,
src/type1/t1objs.c, src/type42/t42parse.c, src/type42/t42parse.h:
Many casts and slight argument type changes to make it work with
a 16bit compiler.
* include/freetype/config/ftoption.h [FT_CONFIG_OPTION_MAC_FONTS]:
New macro.
* src/base/ftobjs.c: Use it to control mac font support on non-mac
platforms.
Implement partial support of Mac fonts on non-Mac platforms.
* src/base/ftobjs.c (memory_stream_close, new_memory_stream,
open_face_from_buffer, Mac_Read_POST_Resource,
Mac_Read_sfnt_Resource, IsMacResource, IsMacBinary, load_mac_face)
[!FT_MACINTOSH]: New functions.
(FT_Open_Face) [!FT_MACINTOSH]: Use load_mac_face.
* src/base/ftobjs.c (FT_Load_Glyph): Scale linear advance width only
if FT_FACE_FLAG_SCALABLE is set (otherwise we have a division by
zero since FNT and friends don't define `face->units_per_EM').
* include/freetype/config/ftoption.h, src/gzip/ftgzip.c: added
support for the FT_CONFIG_OPTION_SYSTEM_ZLIB option, used to specify
the use of system-wide zlib.
Note that this macro, as well as FT_CONFIG_OPTION_BYTECODE_INTERPRETER,
is not #undef-ed anymore. This allows the build system to define them
depending on the configuration (typically by adding -D flags at
compile time).
* src/sfnt/ttcmap0.c (tt_face_build_cmaps): removed compiler warnings
in optimized mode relative to the "volatile" local variables. This was
not a compiler bug after all, but the fact that a pointer to a volatile
variable is not the same than a volatile pointer to a variable :-)
the fix was to change "volatile FT_Byte* p"
into "FT_Byte* volatile p"
* src/pfr/pfrload.c, src/pfr/pfrdrivr.c, src/gzip/inftrees.c: removed
compiler warnings in optimized modes
* src/gzip/*.[hc]: modified our ZLib copy in order to prevent exporting
any zlib function names outside of the component. This prevents linking
problems on some platforms, when applications want to link FreeType
_and_ ZLib together.
2002-11-05 Juliusz <jch@pps.jussieu.fr>
* src/psaux/psobjs.c (ps_table_add): modified increment loop in
order to implement exponential behaviour
tt_face_get_ps_name): Replace switch statement with if clauses to
make it more portable.
* src/cff/cffobjs.c (cff_face_init): Ditto.
* include/freetype/ftmodule.h (FT_Module_Class): Use `FT_Long' for
`module_size'.
* include/freetype/ftrender.h (FT_Glyph_Class_): Use `FT_Long' for
`glyph_size'.
* src/base/ftobjs.c (FT_Render_Glyph): Change second parameter to
`FT_Render_Mode'.
(FT_Render_Glyph_Internal): Change third parameter to
`FT_Render_Mode'.
* src/base/ftglyph.c (FT_Glyph_To_Bitmap): Change second parameter
to `FT_Render_Mode'.
* src/raster/ftrend1.c (ft_raster1_render): Change third parameter
to `FT_Render_Mode'.
* src/smooth/ftsmooth.c (ft_smooth_render, ft_smooth_render_lcd,
ft_smooth_render_lcd_v): Ditto.
(ft_smooth_render_generic): Change third and fifth parameter to
`FT_Render_Mode'.
* include/freetype/freetype.h, include/freetype/internal/ftobjs.h,
include/freetype/ftglyph.h: Updated.
* src/cff/cffdrivr.c (Load_Glyph), src/pcf/pcfdriver.c
(PCF_Glyph_Load), src/pfr/pfrobjs.c (pfr_slot_load),
src/winfonts/winfnt.c (FNT_Load_Glyph), src/t42/t42objs.c
(T42_GlyphSlot_Load), src/bdf/bdfdrivr.c (BDF_Glyph_Load): Change
fourth parameter to `FT_Int32'.
* src/pfr/pfrobjs.c (pfr_face_init): Add two missing parameters
and declare them as unused.
* src/cid/cidparse.h (CID_Parser): Use FT_Long for `postscript_len'.
* src/psnames/psnames.h (PS_Unicode_Value_Func): Change return
value to FT_UInt32.
* src/psnames/psmodule.c (ps_unicode_value, ps_build_unicode_table):
Updated accordingly.
* src/cff/cffdrivr.c (Get_Kerning): Use FT_Long for `middle'.
(cff_get_glyph_name): Use cast for result of ft_strlen.
* src/cff/cffparse.c (cff_parse_real): User cast for assigning
`exp'.
* src/cff/cffload.c (cff_index_get_pointers): Use FT_ULong for
some local variables.
(cff_charset_load, cff_encoding_load): Use casts to FT_UInt for some
switch statements.
(cff_font_load): Use cast in call to CFF_Load_FD_Select.
* src/cff/cffobjs.c (cff_size_init): Use more casts.
(cff_face_init): Use FT_Int32 for `flags'.
* src/cff/cffgload.c (cff_operator_seac): Use cast for assigning
`adx' and `ady'.
(cff_decoder_parse_charstrings): Use FT_ULong for third parameter.
Use more casts.
* src/cff/cffcmap.c (cff_cmap_unicode_init): Use cast for `count'.
* src/cid/cidload.c (cid_read_subrs): Use FT_ULong for `len'.
* src/cid/cidgload.c (cid_load_glyph): Add missing cast for
`cid_get_offset'.
* src/psaux/t1decode.c (t1_decoder_parse_charstrings) <18>: Use
cast for `num_points'.
(t1_decoder_init): Use cast for assigning `decoder->num_glyphs'.
* src/base/ftdebug.c (ft_debug_init): Use FT_Int.
* include/freetype/internal/ftdriver.h (FT_Slot_LoadFunc): Use
`FT_Int32' for fourth parameter.
* src/base/ftobjs.c (open_face): Use cast for calling
clazz->init_face.
* src/raster/ftraster.c (Set_High_Precision): Use `1' instead of
`1L'.
(Finalize_Profile_Table, Line_Up, ft_black_init): Use casts.
* src/raster/ftrend1.c (ft_raster1_render): Ditto.
* src/sfnt/sfnt_dir_check: Compare `magic' with unsigned long
constant.
* builds/amiga/include/freetype/config/ftmodule.h: Updated.
want to list them all here. The operations performed were all logical
transformations of the sources:
- trying to convert all enums and constants to CAPITALIZED_STYLE, with
#define definitions like
#define my_old_constants MY_NEW_CONSTANT
- big, big update of the documentation comments
* include/freetype/freetype.h, src/base/ftobjs.c, src/smooth/ftsmooth.c,
include/freetype/ftimage.h: adding support for LCD-optimized rendering
though the new constants/enums:
FT_RENDER_MODE_LCD, FT_RENDER_MODE_LCD_V
FT_PIXEL_MODE_LCD, FT_PIXEL_MODE_LCD_V
this is still work in progress, don't expect everything to work correctly
though most of the features have been implemented.
* adding new FT_LOAD_XXX flags, used to specify both hinting and rendering
targets:
FT_LOAD_TARGET_NORMAL :: anti-aliased hinting & rendering
FT_LOAD_TARGET_MONO :: monochrome bitmaps
FT_LOAD_TARGET_LCD :: horizontal RGB/BGR decimated hinting & rendering
FT_LOAD_TARGET_LCD_V :: vertical RGB/BGR decimated hinting & rendering
note that FT_LOAD_TARGET_NORMAL is 0, which means that the default
behaviour of the font engine is _unchanged_.
(file_spec_from_path) [TARGET_API_MAC_CARBON]: Added support for
OS X.
(is_dfont) [TARGET_API_MAC_CARBON]: Define only for OS X.
Handle `nameLen' <= 6 also.
(parse_fond): Remove unused variable `name_table'.
Use functionality of old p2c_str directly.
Add safety checks.
(read_lwfn): Initialize `size_p'.
Check for size_p == NULL.
(new_memory_stream, open_face_from_buffer): Updated to FreeType 2.1.
(FT_New_Face_From_LWFN): Remove unused variable `memory'.
Remove some dead code.
(FT_New_Face_From_SFNT): Remove unused variable `stream'.
(FT_New_Face_From_dfont) [TARGET_API_MAC_CARBON]: Define only for
OS X.
(FT_New_Face_From_FOND): Remove unused variable `error'.
(ResourceForkSize): New function.
(FT_New_Face): Use it.
Handle empty resource forks.
Conditionalize some code for OS X.
Add code to call normal loader as a fallback.
Some more variable renames to avoid troubles on the Mac.
* src/raster/ftraster.c:
s/Unknown|Ascending|Descending|Flat/\1_State/.
* src/smooth/ftgrays.c: s/TScan/TCoord/.
Other changes for the Mac.
* include/freetype/config/ftconfig.h: Define FT_MACINTOSH for
Mac platforms.
* src/base/ftobjs.c: s/macintosh/FT_MACINTOSH/.
* src/raster/ftrend1.c (ft_raster1_render): Make `pitch' always
an even number.
warn about the GNU Make requirement at compile time..
* include/freetype/config/ftstdlib.h,
include/freetype/config/ftconfig.h,
include/freetype/config/ftheader.h,
include/freetype/internal/ftmemory.h,
include/freetype/internal/ftobjs.h,
src/autohint/ahoptim.c,
src/base/ftdbgmem.c, src/base/ftdebug.c,
src/base/ftmac.c, src/base/ftobjs.c,
src/base/ftsystem.c,
src/cache/ftcimage.c, src/cache/ftcsbits.c,
src/cff/cffdriver.c, src/cff/cffload.c, src/cff/cffobjs.c,
src/cid/cidload.c, src/cid/cidparse.c, src/cid/cidriver.c,
src/pcf/pcfdriver.c, src/pcf/pcfread.c,
src/psaux/t1cmap.c, src/psaux/t1decode.c,
src/pshinter/pshalgo1.c, src/pshinter/pshalgo2.c,
src/pshinter/pshrec.c,
src/psnames/psmodule.c,
src/raster/ftraster.c,
src/sfnt/sfdriver.c, src/sfnt/ttload.c, src/sfnt/ttpost.c,
src/smooth/ftgrays.c,
src/type1/t1afm.c, src/type1/t1driver.c, src/type1/t1gload.c,
src/type1/t1load.c, src/type1/t1objs.c, src/type1/t1parse.c:
added the new configuration file "ftstdlib.h" used to define
aliases for all ISO C library functions used by the engine
(e.g. strlen, qsort, setjmp, etc...)
this eases the porting of FreeType 2 to exotic environments like
XFree86 modules/extensions..
also removed many #include <string.h>, #include <stdlib.h>, etc...
from the engine's sources where they're not needed..
changed the names of memory macros. Examples:
MEM_Set => FT_MEM_SET
MEM_Copy => FT_MEM_COPY
MEM_Move => FT_MEM_MOVE
ALLOC => FT_ALLOC
FREE => FT_FREE
REALLOC = >FT_REALLOC
FT_NEW was introduced to allocate a new object from a _typed_
pointer..
note that ALLOC_ARRAY and REALLOC_ARRAY have been replaced
by FT_NEW_ARRAY and FT_RENEW_ARRAY which take _typed_ pointer
arguments.
This results in _lots_ of sources being changed, but makes the
code more generic and less error-prone..