Assure that FreeType's internal include directories are found before
`CPPFLAGS' (which might be set by the user in the environment), and
`CPPFLAGS' before `CFLAGS'.
* builds/freetype.mk (FT_CFLAGS): Don't add `INCLUDE_FLAGS'.
(FT_COMPILE): Make this a special variable for compiling only the
files handled in `freetype.mk'.
(.c.$O): Removed, unused.
* src/*/rules.mk (*_COMPILE): Fix order of include directories.
Using `%ld' for pointer differences causes warnings on 32bit
platforms. The correct type would be (the relatively new) `%td',
however, this is missing on some important platforms.
This patch improves the change from 2014-11-28.
* src/autofit/afhints.c (AF_INDEX_NUM): Use `int' typecast. Our
pointer differences are always sufficiently small.
(af_glyph_hints_dump_points, af_glyph_hints_dump_segments,
af_glyph_hints_dump_edge): Revert to `%d' and use `AF_INDEX_NUM'.
The functions in this patch *do* return non-trivial errors that must
be taken care of.
* src/autofit/afloader.c (af_loader_load_g), src/base/ftobjs.c
(FT_Render_Glyph_Internal), src/base/ftoutln.c (FT_Outline_Render),
src/cff/cffgload.c (cff_decoder_parse_charstrings) <cff_op_endchar>,
src/psaux/psobjs.c (ps_parser_load_field_table), src/psaux/t1decode
(t1_decoder_parse_charstrings) <op_endchar>, src/truetype/ttgload.c
(load_truetype_glyph <subglyph loop>, tt_loader_init,
TT_Load_Glyph), src/truetype/ttgxvar.c (TT_Set_MM_Blend),
src/truetype/ttobjs.c (tt_size_run_fpgm, tt_size_run_prep): Do it.
This essentially moves the Telugu script from the `Indic' hinter to
the `Latin' hinter.
Note that this is a first shot and quite certainly needs
refinements.
* src/autofit/afblue.dat: Add blue zone data for Telugu.
* src/autofit/afblue.c, src/autofit/afblue.h: Regenerated.
* src/autofit/afscript.h: Add Telugu standard characters and move
data out of AF_CONFIG_OPTION_INDIC block.
* src/autofit/afranges.c: Move Telugu data out of
AF_CONFIG_OPTION_INDIC block.
* src/autofit/afstyles.h: Update Telugu data; in particular, use
AF_WRITING_SYSTEM_LATIN.
Problem reported by Ralf S. Engelschall <rse@engelschall.com>.
* src/autofit/afhints.c (af_glyph_hints_reload): Fix threshold for
finding first non-near point.
Properly initialize non-near point deltas.
This essentially moves the Devanagari script from the `Indic' hinter
to the `Latin' hinter. Thanks to Girish Dalvi
<girish.dalvi@gmail.com> for guidance with blue zone characters!
* src/autofit/afblue.dat: Add blue zone data for Devanagari.
* src/autofit/afblue.c, src/autofit/afblue.h: Regenerated.
* src/autofit/afscript.h: Add Devanagari standard characters and
move data out of AF_CONFIG_OPTION_INDIC block.
* src/autofit/afranges.c: Move Devanagari data out of
AF_CONFIG_OPTION_INDIC block.
Move U+20B9, (new) Rupee sign, from Latin to Devanagari.
* src/autofit/afstyles.h: Update Devanagari data; in particular, use
AF_WRITING_SYSTEM_LATIN.
* src/autofit/afhints.h (AF_Edge_Flags): New value
`AF_EDGE_NEUTRAL'.
* src/autofit/aflatin.c (af_latin_hints_compute_blue_edges): Trace
neutral blue zones with AF_EDGE_NEUTRAL.
(af_latin_hint_edges): Skip neutral blue zones if necessary.
Such blue zones match either the top or the bottom of a contour. We
need them for scripts where accent-like elements directly touch the
base character (for example, some vowel signs in Devanagari, cf.
U+0913 or U+0914).
* src/autofit/afblue.hin (AF_BLUE_PROPERTY_LATIN_NEUTRAL): New
property.
* src/autofit/afblue.h: Regenerated.
* src/autofit/aflatin.h (AF_LATIN_IS_NEUTRAL_BLUE): New macro.
(AF_LATIN_BLUE_NEUTRAL): New enumeration value.
* src/autofit/aflatin.c (af_latin_metrics_init_blues,
af_latin_hints_compute_blue_edges): Handle neutral blue zones.
The adaptation of the cjk auto-hinter module to blue stringsets in
2013-08-25 had three severe bugs. Mea culpa.
1. Contrary to the latin auto-hinter, characters for reference and
overshoot values of a blue zone are specified separately. Due to
the screwed-up change it didn't work at all.
2. A boolean comparison was erroneously replaced with a cast,
causing invalid results with the `^' operator later on. The
visual artifact caused by this problem is the topic of the bug
report.
3. Two flag values were inverted, causing incorrect assignment of
reference and overshoot values.
* src/autofit/afblue.dat: Fix CJK bluestrings, introducing a new
syntax to have both reference and overshoot characters in a single
string. This is error #1.
Add extensive comments.
* src/autofit/afblue.hin (AF_BLUE_PROPERTY_CJK_FILL): Removed, no
longer used.
(AF_BLUE_PROPERTY_CJK_TOP, AF_BLUE_PROPERTY_CJK_HORIZ): Fix values.
This is error #3.
* src/autofit/afblue.c, src/autofit/afblue.h: Regenerated.
* src/autofit/afcjk.c (af_cjk_metrics_init_blues): Correct error #1.
Use character `|' to separate characters for reference and overshoot
values.
Improve tracing messages, synchronizing them with the latin
auto-hinter.
(af_cjk_hints_compute_blue_edges): Fix value of `is_top_right_blue'.
This is error #2.
(af_cjk_align_linked_edge): Add tracing message.
* src/autofit/afcjk.h (AF_CJK_IS_FILLED_BLUE): Removed, no longer
used.
* src/autofit/hbshim.c (af_get_coverage): Merge input glyph coverage
of GSUB lookups into output coverage. Otherwise, ligatures are not
handled properly.
Don't check blue zone characters for default coverage.
In particular, local extrema without horizontal or vertical segments
are better recognized:
+ A + D
\ /
\ /
\ /
\ /
\ + C
\ /
B +/
If the distances AB and CD are large, point B wasn't previously
detected as an extremum since the `ft_corner_is_flat' function
`swallowed' BC regardless of its direction, tagging point B as weak.
The next iteration started at B and made `ft_corner_is_flat' swallow
point C, tagging it as weak also, et voilà.
To improve that, another pass gets now performed before calling
`ft_corner_is_flat' to improve the `topology' of an outline: A
sequence of non-horizontal or non-vertical vectors that point into
the same quadrant are handled as a single, large vector.
Additionally, distances of near points are now accumulated, which
makes the auto-hinter handle them as if they were prepended to the
next non-near vector.
This generally improves the auto-hinter's rendering results.
* src/autofit/afhints.c (af_glyph_hints_reload): Implement it.
* src/autofit/afhints.h (AF_FLAGS): Remove no longer used flag
`AF_FLAG_NEAR'.
Problem reported by Karsten Lücke <karsten.luecke@kltf.de>.
The new algorithm takes care of the width of stems: If the distance
between two segments is larger than the largest stem width, the
demerits quickly increase for larger distances. This improves
hinting of slanted fonts (especially if the inner parts of serifs
have non-horizontal `shoulders'), avoiding false stem links.
* src/autofit/aflatin.c (af_latin_hints_link_segments): Use largest
stem width (if available) to compute better demerits for distances
between stems.
(af_latin_hints_detect_features): Pass stem width array and array
size.
(af_latin_metrics_init_widths): Updated to use original algorithm.
(af_latin_hints_apply): Updated to use new algorithm.
* src/autofit/aflatin.h: Updated.
* src/autofit/afcjk.c: Updated.
This works around a problem with HarfBuzz (<= 0.9.26), which doesn't
validate glyph indices returned by
`hb_ot_layout_lookup_collect_glyphs'.
* src/autofit/hbshim.c (af_get_coverage): Guard `idx'.
* docs/CHANGES: Updated.
* src/autofit/afcjk.c (af_cjk_metrics_init_widths),
src/autofit/aflatin.c (af_latin_metrics_init_widths): Fix handling
of alternative standard characters.
This also fixes a compilation warning in non-debug mode.
This is useful for OpenType features like `c2sc' (caps to small
caps) that don't have lowercase letters by definition, or other
features that mainly operate on numerals.
* src/autofit/afscript.h: Add more standard characters.
* src/autofit/aftypes.h: Update use of `SCRIPT' macro.
(AF_ScriptClassRec): Add members to hold two more standard
characters.
(AF_DEFINE_SCRIPT_CLASS): Updated.
* src/autofit/afglobal.c, src/autofit/afglobal.h,
* src/autofit/afpic.c, src/autofit/afranges.h, src/autofit/hbshim.c:
Update use of `SCRIPT' macro.
* src/autofit/afcjk.c (af_cjk_metrics_init_widths),
src/autofit/aflatin.c (af_latin_metrics_init_widths): Scan two more
standard characters.
Split the single, incorrect Indic entry into separate scripts so
that the covered ranges are the same: Bengali, Devanagari, Gujarati,
Gurmukhi, Kannada, Limbu, Malayalam, Oriya, Sinhala, Sundanese,
Syloti Nagri, Tamil, Telugu, and Tibetan. At the same time, remove
entries for Meetai Mayak and Sharada – the Unicode ranges were
incorrect (and nobody has complained about that), fonts are scarce
for those scripts, and the Indic auto-hinter support is rudimentary
anyways.
* src/autofit/afscript.h: Updated, using AF_CONFIG_OPTION_INDIC and
AF_CONFIG_OPTION_CJK.
* src/autofit/afstyles.h (STYLE_DEFAULT_INDIC): New auxiliary macro.
Use it, together with AF_CONFIG_OPTION_INDIC and
AF_CONFIG_OPTION_CJK, to update.
* src/autofit/afranges.c [AF_CONFIG_OPTION_INDIC]: Updated.
[!AF_CONFIG_OPTION_INDIC, !AF_CONFIG_OPTION_CJK]: Removed.
Sort entries by tags.
